VEVOR Hydraulic Shop Press, 12 Ton/26000lbs, H-Frame, 4-Hold Adjustable Height, with Movable Plates, for Garage or Professional Users, Orange

bought this to press out some control arm bushings, should have probably got the 12 ton instead. bushings were within its operating capabilities and turned out fine but it struggled with lower ball joints. pressing out, there was a bit of a violent pop that ejected the jack completely from the frame, catching me off guard and only narrowly avoiding injury. pressing ball joints in however, was a more fiddly matter. it was unable to provide enough pressure to force the new ball joints straight in on center, the overload bypass works. i was able to overcome this by working the edges in a circle pressing a little at a time until about 90% in then returning to center to finish it out, at near max output of the press it was able to make the last bit in a violent pop to seat the ball joints. the orange paint is not a permanent coating to protect the press, it is merely there to indicate if you have used it at all as it flakes off on contact with anything. the 2 pieces of black plate it comes with are very convenient that they are included however will bend permanently well before the 6t max is ever reached, i suggest getting thicker plates if you plan to use this regularly. actually, i suggest getting a 12t unit if you plan to use this at anything close to it's limit. idk what the parts are all called so i'm going to go with deck height adjustment pins. those are fine, the holes in the frame that accept the pins though, not particularly skookum, all wallowed out already. hell, the deck has a good sag to it too now. so while it seems to be engineered to survive the forces of the 6t jack it's built around, i can honestly say it only just barely does that. this is at best hobby quality, for home light duty use, dont count on it lasting a week in a commercial workshop and is priced accordingly. do not attempt to put any larger jack in this frame, it may just kill you and if you want it to last forever it might be better suited to maybe a 3t jack. so while my results were sub optimal, i know i was asking too much of this tool and my experience with it is my fault. except the paint, the paint could be much better. so weighing all things here, i'm giving this 5 stars overall not because its a great press, it isnt, but because it is exactly the $97 worth of press i paid for and it did what i asked of it when i should have bought $167 worth of press.

Had a stubborn hub barring but it got it out the placing was some what difficult but works

Arrived missing nuts, bolts, washers. Package was intact. I purchased replacements. The hydraulic jack would not hold pressure. Contacted Amazon and they reimbursed me for the nuts and bolts. Told me to contact Vevoor for a jack replacement. Impossible to do. Too heavy to take apart and return. Very disappointed in manufacturer and wish Amazon had done more to help. Finally gave up and just bought a jack myself.

The base is too wobbly. The way it slides around, they could have had a better interlocking for it.

Love it. Easy to put together. It is short and perfect for table and or bench top. I make coin rings and 2o minutes out of the box I’m punching coins. Can not beat it for under $100. Vince. A+. Did I say I love it !

The press arrived in two nested boxes (a box in a box) but all pieces were present. Assembly was simple. I used a rafter square to ensure the feet were perpendicular to the risers and assembly took about 10 minutes. There are two sizes of washers and nuts. Four for the legs and two for the press table. The two included plates are minimal, but functional. The entire press is coated in orange paint which is already flaking off, which is anreplaceable. The included bottle jack is unsecured but easily replacable. One of the tabs broke off the relief valve immediately upon first use. Not a deal breaker for me given the low price of the press but not great, for sure. My major concern lies in the bolts of the work table. They are very weak (head reads 7.8 which is very poor grade) and there are no sleeves to maintain spacing. This means you cannot tighten the bolts down as the table would squeeze against the risers and make the table unadjustable. After only two presses, the bolts are bending and will have to be replaced. This isn't much of a problem for me as I have access to more fasteners and sleeves but I don't know how many other home-gamers are so fortunate. They really should have used much stronger bolts and included sleeves (just tunes that slip over the bolts to maintain spacing) as 6+/- tons of shearing force is quite a lot for suboptimal bolts to endure for very long. If you're using this as a platform for herbal pressing, this might not be such an issue for you, though, as the functional pressures are much lower.

Very im-pressed. Cheaper than the rest.

To get 70 lbs of steel and cardboard delivered to my house for $91 and have those parts come together to create a press as robust and useful as this is nothing short of amazing. Assembly was quick and simple - although the shoe of the bottle jack was not in place and under spring tension when it came out of the box. I bought it to rebuild a differential, and so far it has done everything I have asked thus far. As with every press, the 'trick' is finding junk around the shop to use as spacers and press arbors. It should be useful as long as it holds together and I don't try anything stupid with it. This press undercuts the price of the least expensive press at HF by a lot of money!

Todo correcto buen funcionamiento

It look stabil

Solid piece of kit at a good price. Bought to push out suspension bushes and does the job well. I had issues in the initial delivery but Amazon's customer service was excellent and the problems were resolved within a couple of days.

Very good product

just opened the box looks really well made