Elite Screens Sable Frame StarBright 9, 122-inch Diag.16:9, 4K/8K Ultra HD Ceiling Light Rejecting and Ambient Light Rejecting (CLR/ALR) Fixed Frame Projector Screen for Movie Home Theater, ER122H-SB9

The screen is great! I already have a portable Elite Screen so I was familiar with the quality.I will say that you need to be very careful with the black skin around the edge while assembling or you will end up like me and have scuffs in it. Not a big deal, but you want it to be perfect. Also, it is not easy to assemble. The springs are a massive headache, but they are what keep the screen itself taut, so they are a necessary evil. BTW, don't do like I did and stand it up against a door handle. I was terrified when I went back to it and saw the bump in the screen, but it immediately disappeared.For what it's worth, this was shipped to me on Guam and it was packed well enough to survive being on the ship for weeks. Would definitely buy again.

The screen was super easy to assemble and didn’t take very long to put together. It looks really good on the wall and it saves space in the family room as well. The picture quality is really good also when displaying the image from my projector, granted I have a decent projector that is a true 4k laser. I highly recommend this screen for any room that you may want to place this in your home. Great quality and decent price.

I've had this screen since September 2017, and so I've been using it every day for over a year now. It took me about an hour or so to assemble and hang (it 's easier if someone can help you assemble it) and I replaced an old pull down screen with this one. The edges are a nice black velvet, and do a good job of absorbing light if you overscan the projector image. The reflectivity of the screen is very good for a screen at this price point, and worked well for my 1080p projector. I recently upgraded to a 4K Epson projector and the sharpness and quality is unbelievable for a 100" image. You can buy a more expensive screen from Da-Lite or Draper, but for home use, this one does well for moderate brightness projectors (1200-4000 lumens) and I've actually been using Eco mode on my projector since the brightness was causing eye fatigue just watching a football game or a movie.I have my screen hanging from the ceiling, but you can also mount it to a wall. It's not too heavy, one person can easily lift it, but it's a lot easier to position with a second person. I am very impressed by this screen and would definitely recommend it to anyone looking for a reasonably priced home theater screen that isn't just a piece of garbage. One huge advantage of a permanent screen over a pull down or motorized kind is there are no wrinkles at all, and the screen will never move around if there are fans blowing or people walking around, something that would happen with my old pull down screen, also made by Elite.

This is my first time assembling a projector screen, but far from my first time using tools. I honestly was impressed with this screen for the price. I had some issues with parts missing, but luckily they provide extras. For the price, and the issues I experienced the screen is still worth it. I wasn't expecting perfection in every detail. This is a budget friendly screen. If it was one of those $500-$1500 screens I would expect perfection for those prices.Screen was very well packaged and arrived without damage to the screen, even though the box looked pretty beat up. The directions were pretty straight forward and easy to follow although it would have been easier with larger pictures but still do-able. I really liked that they provided a thin sheet like material to build the screen on.The corner and center sections that connect the frame together, have threaded holes for the screws. I had a few screw holes that the screw had a hard time getting started in, probably small burrs left over from creating the threads. I just removed the connector section and was able to put more force into the screw when holding the connector section by hand, and it cleaned up quickly and the screws was able to go into the threads easily after that. Extra screws are provided. I think I have something like 4-6 extras after completion.The screen material itself fit great onto the frame. The dowels provided fit great into the sleeves along the edges of the screen. I did not have any dowels sticking out past the frame((If dowels are too long, they would be easily cut with a cheap hacksaw)). I would suggest laying out the dowel rods on the back of the screen in the frame before sliding them in the sleeves. That way you will be able to see where the dowels fit bet. For my 100'' screen, I had 6 dowels, 2 longer dowels, and 4 shorter dowels. The 4 dowels went in the sleeves on the top and bottom of the screen, and the 2 longer ones went in the sleeves on the sides of the screen.Instructions for connecting springs to the dowels through the holes in the sleeves was very easy follow, and worked out great for me, other than I didn't have enough springs pre-installed. ((they place the springs into a track on each section of the frame from the factory, the springs are taped down into the track so they are secured during shipping)) I found it was easiest to pull the dowel in the sleeve as close to the spring as possible and then slightly lift the screen up when inserting the spring hook through the hole in the sleeve onto the dowel. It kept the spring hook from making holes or scratching the sleeve that the dowel was in.Center bar was last to install and was easy, no hardware for it. It just uses a friction fit.This screen also comes with some brackets and hardware to hang the screen on your wall. The hanging brackets are made out of aluminum and use a French Cleat style(best hanging style) hanging system, which the frame perfectly rests on the brackets without interfering with any of the springs.Once assembly was completed the screen frame feels light yet strong. I had no wrinkles at all when finished. I never had any smells from manufacturing. The screen looks very high quality, especially considering I purchased it for $150.**The only reason I am giving it 4 stars is because they didn't install enough springs on the frame rails from the factory. Luckily they sent 4 extras which I used all 4 to make up for the ones missing. The frustrating part is that I had to take more than half of the screen apart to add in the missing springs where I needed them.

I had a retractable projection screen before this and let me tell you: get this.The screen on the retractable always had creases, was never straight, and didn't seem to have the same quality. This one was super easy to put together (took me about 30 minutes to build and hang by myself) and is leaps and bounds better than my last one.The black felt around the edges is nice and the screen is a fantastic quality. I am noticing a huge difference in colors and black levels.10/10, highly recommend.

Long install process doing it solo but it wasn't too hard. Has stayed put and no issues so far. Screen quality seems great.