CREWORKS 22L Digital Ultrasonic Cleaning Machine with Degas and Gentle Mode, 480W Ultrasonic Cleaner Machine with Heater and Timer, 5.8 gal Ultrasound Cleaner for Retainer Watch Auto Tool Machine Part

This is my first ultrasonic cleaner so I didn't want to go overboard without knowing the technology itself was going to do what I wanted. I bought a reasonably sized model that seemed to be reviewed well. I was advised that I should make sure the one I bought had a "degas" function and this one does. That just gets rid of any stored air in the liquid you're using to make the cleaning process safer on things like electronics, and more effective. You'd be surprised how much air comes out of even just plain water. It works well. Does what it's supposed to do. I clean stuff like watch bracelets, glasses, rings, and other things that get gunky and are hard to clean using normal methods. I've also cleaned very small PCB's. You can use the cleaning function with or without heating, although if you do it for a long time, the water will warm up regardless. But generally you would want it at least somewhat warm. If you're heating cold water, be advised that it will take a little while just like trying to heat a pot of water on an electric stove. You need to turn on the heating function first, wait, then start cleaning. I don't find the noise especially loud or annoying but I am a middle aged guy who's probably lost the top 8khz or so off my hearing (we all do over the years). I know my dog hates this thing and will run to the opposite end of the house and sit in a corner whenever it's on, even if I keep it in the laundry room and close the door. Something to consider. I'd use it in the garage if I had an outlet there. I may start using it outside, though I don't know how far the ultrasonic part of the sound travels. I don't want to freak out every dog in the neighborhood. The one thing I'd do differently next time is get a bigger model. Again, I intentionally kept it a little smaller for my first one because I didn't know if I'd even like it, but it was a bit smaller than I even expected when I got it, and now that I've had it for a while, the size is a little bit limiting. It is fine for jewelry and the other things I mentioned. But if you want to be cleaning stuff like tools, circuit boards, or even vinyl records (yes, that's a thing you can buy an attachment for), you need the next size up.

This product is great for cleaning jewelry small objects even small ceramic knickknacks. It works. Great heats up great very happy. Highly recommend recommended if I wear this one out I will purchase another one great product..

I have gone through a few small, budget priced ultrasonic cleaners in my shop. They usually work OK. Temperature control is always iffy, there is often no facility to degas cleaning solutions and cleaning action isn't great. Eventually the heating elements go or the transducers go. The CREWORKS 6L Digital Ultrasonic Cleaning Machine is impressive for a number of reasons. The unit has three transducers which is on the upper end of transducer count for a 6 liter unit. The machine has a degassing function that can be used throughout the cleaning process, cycling between degas and clean, or for time of operator choice. The Creworks has excellent temperature control. There is a solution temperature rise above ambient with heat turned off, but this is normal for ultrasonic cleaning and caused by process cavitation. As an example, solution temperature rose from 61°F to 68°F during a full power, 30 minute cleaning cycle. The 6 liter size is handy. Usually they are too small to fit all of the machine pieces I work with, or too large and waste solution. This one is right for me, particularly with this tank's capacity and aspect ratio. The unit is well made. nicely finished and it definitely improves the appearance of my work bench. Of greatest importance, it cleans parts really well, and it does so quickly; light oxidation, waxy grease, general crud. The ultrasonic process gets into every surface. I'm very happy with the Creworks machine.

I have been looking at ultrasonic cleaners for a while and decided to buy one when a repair on my bike necessitated the removal of the chain and cassette (real wheel gear). Both items had at least three years of oily dirt and grime and the chain in particular was almost black from dirt and grime. I was able to put both items in the cleaner along with a mixture of Simple Green HD and water. I let the system run for 20 minutes and both parts emerged from their bath looking brand new. Both the chain and cassette have regained their original silver color and I anticipate cleaning up these parts should allow them to operate as new. The product itself (3 liter) has a relatively small footprint. Takes up about the same amount of space as a large toaster (but a little taller). Easier to clean up than I expected but this size unit does not have a drain. Pretty easy to dump everything once it cooled down. Going with a one star deduction due to an apparent lack of temperature regulation. The temperature continued to climb 10 degrees beyond the setting through the period of the cleaning. This may be a one off but something to watch. Nevertheless, I’m pleased with the outcome and my wife is already planning to use it to clean her jewelry. Before and after photos shown. I recommend this product.

Who knew ultrasonic cleaners worked so well? I’ve been dipping my carb parts into Berrymans for years now - but once the water heats and with just a bit of Oil Eater, they were as clean as I’ve ever seen them - jets were clear and I didn’t even have to fully disassemble. Serious game changer for me!

On my second tank after the first one had a mechanical failure on the power switch. The new replacement I bought now is starting to fall apart. Audible loud noises while the power is on (ultrasonic is turned off, heater is turned off), so im just waiting for this one to die on me. They work well for a couple of weeks, but if you are looking for something to actually use for more than a couple of months I would NOT buy this product. Really with there was a warranty or something I could do to get a replacement since I have bought 2 of these.

Muy bueno y el precio esta justo se esta utilizando para uso dental

Se ve un producto de buena calidad, lo he usado un par de veces y todo bien, algo muy específico que me agrada es que calienta rápido, otras maquinas tardaban horas para llegar a temperatura y esta tarda apenas 15-20 minutos algo asi

Si sirvió para lo que quería

Si cumple con la limpieza pero el control de temperatura no sirve aunque no active la temperatura se calienta, y con algunos artículos que no deben tener tanta temperatura me los va a dañar, y el selector es en Farenheit aunque le pongas un número no lo respeta y sigue calentando