uijino Replacement Heads SH50 for Series 5000 Shavers, AquaTouch, PowerTouch, MultiPrecision Shaving Heads for S5210 S5370 PT730 AT810 Electric Razors, 3 Packs

The media could not be loaded. Works just as good as when I bought it. Make sure that yours is the 5000 series and has notches for the shaving heads. See video for instructions on how to replace the heads and reset the reminder. I also recommend taking out all 3 heads to properly clean it and let dry overnight before putting new replacement heads in.

I've used Norelco's for over 30 years and have bought OEM replacement blades only. As others have noted even the original blade performance seems to taper off within a few months, so I thought I would give these a try. I installed them with the supplied screens, but I save the original blades and screens just in case these weren't satisfactory. After using the new screens/blades for a few days I found the screens were an issue, they tended to catch and pull hairs, so I traded out the new screens for the old. Problem solved. Blades = acceptable (and if you didn't tell me they weren't OEM - at least at this point - I wouldn't have known). Screens = noticeably inferior (discard them and opt to clean and reuse the old screens with the new blades).

These work as advertised, easy to install and works really well.

They did not fit the razor well, shaking around. They were dull and we're very uncomfortable(painful) to shave with. Not to mention a bad shave to boot would never buy these again.

Arrived in a small white box that when opened, the Replacement Heads look just like the original blades. The picture with the 3 dirty blades is what I took out of my razor. They look just like the new uijino Norelco Replacement Heads. They shave just like a new pair of blades should. There was no drag or biting from half-cut whiskers. I’m going to buy another set of these uijino SH50 blades as it is getting harder to find SH50 at a reasonable price. Uijino blades are more than reasonably priced. I’m very happy with the quality of the shave. I can’t tell the difference and I doubt you could either.

I was really impressed by how close to the OEM these look, it's nearly a 1:1 reproduction.All of the blades look nearly identical too. This has been the best showing I've seen so far on non OEM Norelco replacement blades. That says a lot about these heads.They fit my shaver very well and did a good job shaving my beard. Though not as close as my OEM Norelco blades.Naturally, the biggest selling feature is evidently the asking price. This being much cheaper than original Norelco replacement heads.If you're looking for a good value and something that works almost as good as OEM blades, I'd say give this one a shot. I was quite impressed by this particular set of shaving heads.

These razor heads fit perfectly on my husband’s Norelco razor.He said he replaced them because the others were old. These razor heads give a smooth close shave.It’s a good idea to replace every now and then.* I write reviews to let you know how this product was for me, and to aid you in your decision to buy or not buy.

4-23-2023I have previously ordered 2 different sets of “generic” replacement blades. The first set tried very hard to Mimic the Look of the Norelco “blade guards/covers”They also said “THEY MADE IMPROVEMENTS” Well what you really noticed was the NORELCO blades have a “double blade, lift and cut technology.” I thought I was going to see an attempt at an “Exact” copy of the Norelco blades. I did not, No “double lift and cut blades.” My replacement blades only have ‘one blade” (And it is also the “spring arm assembly.”I thought that might be the improvement since looking at the USED Norelco blades they look like they might “get in the way of each other? Maybe a little gimmicky?The SECOND set of GENERIC BLADES did not try to copy the “blade covers” and the body of the blades was made different. But those blades MIGHT have felt a little sharper than the first “generic” set?But these blades looked very similar to the first generic blade set.These blades say “New easier open packaging”? But for me the old style packaging is “easier and safer” for Me to deal with. Getting these blades out of the bag makes for a little more risk of “fumbling the blades” a bit more “risk” of getting cut that way? But really not a big deal for most people and it makes for Less Garbage in the landfill. 😊 (So “obviously” the little box and bag in the picture are these new blades.) 😉THESE BLADES LOOK AND FEEL ALMOST EXACTLY THE SAME as the first set. Only the font on them is a little bit ‘thicker.” THE ONLY THING THAT LOOKS DIFFERENT BESIDES THICKNESS OF THE FONT/PRINTING, THE PACKAGING AND THE SELLER NAME. IS THAT THESE BLADES DO HAVE A SLIGHTLY DIFFERENT grinding look/shape to the other generic set. (“You can’t get the original ones I bought anymore”?) The first set is “is currently Unavailable” and it cost $2 less.I am not sure if they cut as good as my first set. I’M thinking these MIGHT? not be as good as the first set? But I am tired now while testing them, so…BUT THESE DO CUT BETTER THAN MY “4 AND ½ MONTH OLD” OFFICIAL NORELCO BLADES THAT I PUT IN NEW AT “THE START OF THE YEAR.” I JUST NOTICED LAST WEEK HOW THEY BECOME NOTICEABLY DULLER AND MISSING MORE HAIRS.SO THIS STORY OF CHANGING THE BLADES ‘EVERY 12 MONTHS FOR THEM TO STAY SHARP AND CUT RIGHT/GOOD HAS ALWAYS BEEN KIND OF B S FOR ME. (These “generic” blades say the same thing.)I’M GOING TO PUT ONE OF THESE NEW SETS IN SOON AND SEE HOW LONG THEY LAST.(YES I TOOK A “BLADE” OUT OF EACH PACK TO TEST THEM.)ORIGINAL NORELCO BLADES COST ABOUT $36 THESE COST $12.The NORELCO DO NOT WORK GOOD FOR ME FOR A YEAR. Actually I notices a drop in sharpness after 3 days or a week or 2. (My beard is like “stone” though. If you have a “light’ beard, maybe all blades will last you longer.SO YOU CAN BE THE JUDGE OF VALUE AND IF YOU SHOULD GET THEM. 😊