Pro 1 | Wi-Fi & LAN, 1-Channel Smart Relay Switch | Home Automation | Bluetooth Gateway | Compatible with Alexa & Google Home | No Hub Required | Remote Control | Timer Schedule | Dry Contacts

Shelly's products are Excellent; they works as intended for my installation. The insallation is easy, as described in the user manual. I had used them over WIFI and works great, they works over Ethernet (LAN) and Bluetooth too.

Very cool unit. I'm using it to control the lighting in my farm shop, the lights on the exterior of the shop, and also to trigger my electric door strike for the walk-through door and its programmed to turn the lights on if they're not already on. The coolest part is I have the fourth channel controlling a 60 amp contact closure relay to send power to my fuel barrels in my farm yard. This way no one can steal fuel All I have to do is open the app press the button and I have it programmed to shut off after 30 minutes. It works so slick! I really wish the unit had normally closed and/or dry contacts. Every output controls an additional relay because I'm either controlling 220 volts or the amperage exceeds the rating of the contacts. So the wattage function of the unit is useless in my situation. Outside of that, it works every time. I've since bought another one I'm going to wire it up to control my three-button overhead commercial door. The app to control this is very solid. If you're not patient or tech-minded you're going to struggle with this unit but stick with it and you'll get it. I'm completely hooked on these Shelly devices. I'm thinking of other ways I can use them like a timer to turn off my battery chargers for my Milwaukee tools so they don't blow up overnight. Currently wiring up exterior lights of my home on timers within the Shelly. My wife just rolls her eyes but I'm having fun! :) UPDATE: I've currently added another pro4 for more control over lights and I've added a pro 3 to control a commercial overhead door with a three-button open/ close /stop control. Each relay on the pro 3 performs the open/ close/ or stop function With an external relay for the stop circuit requiring continuous normally closed contacts. If I get around to it I'll post a picture of the wiring schematic.

I picked up this relay to control a big dust collector and air compressor remotely in my shop, using a 120v contactor. Setup was straightforward—the included instructions and online guides were actually useful, even for someone who isn’t deep into home automation. I integrated the relay into Home Assistant, but I appreciate that you can program the unit through the Shelly App and all the configuration is stored locally and works even if it looses connection to the internet. Build quality is solid, and both the Wi-Fi and LAN options are handy. The two independent channels are a real plus for running more than one machine. Built-in power monitoring is a nice touch, letting you see energy use at a glance.

This is the largest size that supports dry contacts. Was able to add it to the Shelly app very easily.

The fact that these have an ethernet port for direct wiring is great, I can put them in a metal enclosure for fire protection without worrying about no wifi signal. They work perfectly with home assistant. They do tolerate high amperage without heating up too much.

Perfect network relay, the app is very easy to use. You need to know a little bit of relay logic to connect to your application the instructions only show one diagram but you can connect on different ways.

I use one of these for each of my laser cutters. One output for the laser, one to the chiller and one to my exhaust fan. Super easy to set up with the Shelly app and then pull into home assistant. From home assistant it’s a walk in the park to then automate each relay output.

I limit the charge current to 10 A 120v home wall outlet to not overload my wall circuit panel. I want to trickle charge my bank of lithium battery’s when the sun don’t shine. This device works well and easy to wire and setup. There is a very nice Shelly app to manually kick on the charge when I feel it’s needed. I can automate the process on a hourly basis or I can learn a bit of programming and logically kick on the charge if the battery’s get low.

Ich habe den Shelly Pro in meinen Verteilerkasten eingebaut und steuere damit meine Dekobeleuchtung in meinen Fensterns. Über die Shelly App und andere Home Assistent Programme lassen sich viele verschiedene Lichtsteuerungen realisieren. Der Anschlußplan enthält alle wichtigen Informationen für dein Einbau und die Anschlußklemmen sind von guter Qualität. Das Gehäuse fühlt sich zwar etwas weniger robust an als bei einem Sicherungsautomaten, aber ist trotzdem von guter Qualität und Passgenauigkeit.

Einfache Montage Leichte Programmierung Perfekt zum Eistellen per SmartPhone perfekt steuerbar Tipp: Bei Problemen(Ghost Effekte) ist ein Shelly RC Glied nötig- Das liegt aber nicht der Shelly sondern an den "schlecht" entstörten Leuchten aus den Baumarkt.

Toppen

Bon produit, fait le travail, notice claire

Funciona muy muy bien