SOFO Carburetor Racing 212cc Performance Kit with Air Filter Exhaust Pipe for 212cc Predator Stage 1&2 Kit 196cc 6.5HP GX160 BT200x CT200u Go Kart Mini Bikes Silver

The quality is very low. I noticed after about 20 minutes that the muffler was moving like a liquid. 5 minutes later the muffler split at the threads. The bike is also running extremely lean. Only runs on choke and only barely. When it does get going it feels MUCH faster but dies at idle usually. Ordered a replacement. Arrives 9 January 2024. Will update if results change. UPDATE: Welded on a much higher quality and restrictive muffler. Runs a bit better and doesn't die as often. Still running lean but canceled replacement. And will order bigger jets from somewhere else. UPDATE 2: Seller messaged me privately and offered to make it right. Updated stars for meeting my needs quickly and fairly. Look forward to using seller again in the future.

Old carb was surging at idle. Pulled it apart to clean it and found a damaged o-ring. I live in the sticks so I checked Amazon for a carburetor rebuild kit that may have the o-ring. I didn’t find that but I found this complete carb and decided to try it for the price. It arrived. I bolted it on, turned on the gas and one pull later it was idling smooth as silk. At wide open throttle I needed to adjust the fuel screw slightly to smooth the engine, but it’s perfect now. The stock carburetor on my Harbor Freight 212cc engine which I put this on did not have an adjustable fuel screw so that is a nice feature on this one. I’m not sure how you can go wrong here. I have several Predator 212s so I am probably going to order another one of these to have on the shelf just in case I have another issue someday. Quicker to just swap carbs and get back to work than spend time cleaning the old one if necessary.

Carb looks decent and works good. However, went all but 20 ft and the header pipe just fell off. I saw other reviews stating the same problem but was hoping they fixed that issue. Just 2 little cheap tack welds that broke instantly.

Customer service is really good, they saw my original post and reached out to help solve the issue and even sent a new kit. Everything is working now as it should. I would do business with them again. Original review: Carb is almost impossible to keep adjusted and the exhaust manifold fell apart after an hour of use as its lightly tac welded in only 2 spots at the flange! Complete garbage and not worth the headache. I should have payed closer attention to the reviews.

This carb fit my 212 Predator engine perfectly. It cranked on the second pull. I also needed the new fuel line that was included in the kit. Good product for the money.

Man I'm so broken hearted! I was so excited to FINALLY get this kit for my beloved mini. First an emergency yanked me out of town before it made it in mail. But it was waiting on me when i made it back home after several days. Couldnt wait to get it put on my girl! Unfortunately The carburetor was impossible to tune in. I've plenty of experience having owned several kx models with mikuni carbs over the years. Well damn i figured id pick my battles give up and just put old carb back on. Thankfully rest of assembly went fine and looked good. I was scheduled to leave town for a few weeks for work but wanted to give shiny new parts a test run. I was able to take a quick mile long experimental ride before having to park it till I got back. Bike ran well exhaust and muffler sounded pretty good. So I parked the bike inside safe and sound. Couldn't wait to get back and take a nice long ride. Finally 3 weeks later I was able to pull the bike back out and was pumped to do so. I was so excited been waiting for over to get this kit! But guess what? After 20 minutes of riding all went to hell. The muffler has busted out all the way around the throat where body was welded to shaft. 20 minutes. So disappointed. That can be nothing but absolutely cheap materials and shoddy workmanship. Absolutely heart broken. I get on here to see about find out I'm 3 days too late. The muffler and exhaust was on my bike for less than 6 miles. 6 miles. I am so upset. I didn't have the money to waste on this. It took over a year to get to a place where I felt comfortable with splurging on it.

My old Harbor Freight pressure washer would not start and I was ready to scrap it. As a last resort I ordered this carb, after all it was only 15 dollars and I could always return it. Well it arrived the next day so I muddled through installation, which took about an hour. With great anxiety I set the the engine controls to start and pulled the start handle and it started on first pull. Am I Happy? You Betcha!

Replaced old carb on Earthquake 16" garden rototiller. I works like new again. This same carb should also fit my wood chipper and other, similar small engine machines. I'll likely order a spare to have on hand, and save another service charge.

The jets that come with this are too small the one that in the carb and the 2 other ones they are 0.028” they (witch is stock jet size for a stock 19 mm 212cc carb) need to be drilled out to 0.0366” or else it won’t work but once I got it to work the but probably picked up like a half a horsepower and a bit of torque on the low end

All the jets are the same size for the carburetor , the jets are too small and causes the engine to misfire and bog at full throttle . Everything fits fine except for the tab that holds down the choke lever. The kit is also missing vent filters for the gas tank and the valve cover . I now have to go order a set of enlarged main jets for carburetor .

Got the package and was missing parts and got the wrong exhaust. Had to weld on fittings to make it work with the threaded muffler that came in the kit. Only thing I liked was the air filter and adapter.

The carb ran crappy on my stock Coleman 196cc motor no adjustments made it run better, and the jets that come with the carb are the exact same as what's in the carb. It comes with a #12 jet installed and in a baggy were 2 more #12 jets... Waste of money. Get the real thing fron GoPowersports

Everything is as described and fits well except the piece that sits on top of the choke switch to hold it in place. When installed it blocks the choke from actually closing all the way, so I removed it for now. Will have to figure out some other way to prevent the choke switch from popping off. Also, the three jets that came with the carb are all the exact same.