80 Grit

The sandpaper will work on my one sander. I just have to cut it to size. Good product.

Sandpaper roll is good quality

Love the product and idea of cutting the length to my specific needs for my SuperMax 19-38 drum sander... wished it was 50-foot roll as the remaining strip left to cut came up a few inches short and having to waste nearly 9~ feet of the roll and not having an extra 6 inches to make another full-length strip to work. Be happy to pay a little extra for the 1 additional foot of length. Most of us with drum sanders have the 19-38 model and it's just not enough length to get the last of the available roll to make a final strip to use. Please consider making the roll 50 feet.. and charging a little more to get full value on this.

I bought this sandpaper to install on my porch ramp boards, in cut into 16" lengths, sprayed the back side with waterproof adhesive, onto a clean surface, looks good, installed to help prevent falls, my wife's feet flew out from under her on a frosty morning recently, this should help a lot, I also use a long outdoor rug when it snows, I put in down after I clean snow and ice off, but this sandpaper idea works good for frost and rainy weather.

Belt is a bit thin compared to original one. On our grizzly drum sander the catch mechanism is a PIA and the thinner belt material tends to tear much easier. Had to use another piece of the belt and glued it onto end to reinforce it. Seems to work, will see how long it lasts.

Just what I needed for my drum sander.

I ordered three different rolls; 80 grit, 120 grit and 240 grit. Of the three rolls the 80 grit and 240 grit did measure 3 inches in width. The 120 grit roll however did not. It was instead only 2-7/8 inches wide (2.875"). The rolls all state that they are 75mm wide, (2.9527") but that 120 grit roll was 73mm wide. While that may not seem like a significant difference, it made it very frustrating to try and get it to wind correctly on my 1632 drum sander. I wish I had measured the width before cutting a strip to length, as I cannot now return the roll.The backing on the rolls do not indicate the country of origin, however there were some Japanese characters printed on the paper label on the plastic wrapping that the rolls came in. That surprises me as I would expect Japanese quality control to be exemplary. Perhaps the company is Japanese but has the products manufactured elsewhere that quality control is lax.I would also add that the cloth backing is quite flexible, J weight, unlike most other abrasive belts which tend to be stiffer backing, X weight. It does make it quite easy to wind onto the drum, but it remains to be seen how that will affect the durability of the abrasive.Just bear in mind that sanding drums are manufactured according to a specific, expected width of the abrasive in order to wind correctly on the drum and meet the attachment points. A difference in abrasive width may require some calculations in order to try and adapt it to the drum.

Great quality sandpaper. Great price. Item arrived as described. Fast shipping