








🛡️ Elevate Your Lexus Touchscreen Game — Crystal Clear, Ultra-Protected, Always Responsive!
The WEIPIN Glossy Tempered Glass Screen Protector is engineered exclusively for 14-inch touchscreens in 2023-2026 Lexus RX & TX models. Featuring a perfect 1:1 fit, 99% HD clarity with anti-glare technology, and a robust 9H hardness rating, it safeguards your touchscreen from scratches, cracks, and fingerprints. Its ultra-thin 0.33mm design enhances touch sensitivity, while advanced oleophobic and hydrophobic coatings keep the display clean. Installation is simple with precision edges and bubble-free technology, supported by lifetime customer service for lasting peace of mind.






| ASIN | B0C77MX55V |
| Best Sellers Rank | #84 in GPS Screen Protector Foils |
| Color | L exus RX 23~26 TX&24~26 Tempered Glass (14 Inch) |
| Customer Reviews | 4.3 4.3 out of 5 stars (332) |
| Date First Available | June 6, 2023 |
| Item Weight | 14.6 ounces |
| Item model number | FJEU1223481-RX14in |
| Manufacturer | WEIPIN |
| Product Dimensions | 11.22 x 6.5 x 0.5 inches |
| Special features | Gloss Finish, Scratch Resistant, Touch Sensitive |
B**B
Great value, protection, and peace of mind.
Installed on 2025 Camry XSE, Perfect fit, 15-minute install. Comes with everything you need to, including instructions, wet / dry wipes and alignment guide. If you've ever installed a screen protector on phone, tablet, or other device, you'll know the routine. Have had it installed for 4 months now and am very pleased. Excellent clarity and don't have to worry about scratching the OE screen. If you ever decide to remove / replace it, simply lift a corner up and gently remove.
K**L
Genesis GV80 27" touchscreen display
We recently purchased a new GV80 and I hated all of the fingerprints on the displays. So I found this product. It took a bit to install all of the pieces, but the instructions were great. Once they were on they look amazing. And no more fingerprints. It also took out all of the glare. I highly recommend this product. It was well worth they $$.
F**E
EASY install; add protection; No change in use of fingertip controls - Nice additional protection
This was really easy to install and it fits my new Audi A5 Quattro perfectly! I followed the instructions (and also used a microfiber cloth of my own) to clean the screen. I also watched the video the seller has on its page regarding the alignment tabs to make sure I was doing it properly. The little tabs helped keep the screen in place while I pulled back the protective backing tab. After making sure the screen was clean and fingerprint and dust-free, it took about 60 seconds from beginning to end to affix and to make sure any air bubbles were gone. I did see one air bubble, and found the it was easy to lift the screen from the corner with my fingernail. It was wondering how thick it was going to be and if it would fit flush on the screen, and it does!! The thickness is perfect. I tested to make sure that it could detect controls when using my fingers and it does without any delay. I am glad there is a little bit more protection on the screen.
G**L
Good but not perfect
So, this protector is pretty good, but not perfect. (Didn't I already say that?) Here's my take on it, good and not so great. Positives: 1. VERY EASY application. I was REALLY impressed with how easy this went on! I've applied PPF using soap & water & a squeegee, which turned out nice, I've installed the Android & IOS protective film (some easier than others), but this BY FAR was the quickest and easiest to install. 2. No glare. I like that there's no reflection or glare (although, there wasn't much before). 3. The fit. Some reviews claim the "holes" or areas around the knobs, the right one in particular, were not correctly measured and cut. I can attest to that not being an issue for my 2024 Lexus RX350h Premium with the 14" screen. 4. Fingerprints and smudges are REDUCED. They're not COMPLETELY gone, but they're reduced....which takes me to the negatives. Negatives: 1. The fingerprints are not COMPLETELY gone. When I touch the screen to change a station or close a dialog, there are slight fingerprints. This could be me because maybe my fingers are more "oily." 2. There is an overall "dullness" to the screen now. Remember when I said there was no glare in the Positives section? Well, it's almost like someone sprayed the screen with a matt finish. I honestly just wish the protector was a neutral CLEAR - no shine, no matt finish, just....CLEAR. A couple of installation tips for you. I "dry-fit" the protector before peeling the backing off. So, instead of lowering the protector from the top DOWN towards the knobs, I moved it INWARD from my chest to the screen. That way, the cut-outs fit PERFECTLY over all 3 knobs. I also used a microfiber cloth to cover my finger and drew a "cross" or "plus-sign" from the top down and from the left to the right to make sure it stuck. It did. Finally, I had ONE bubble in the center of the protector about the size of a quarter. I used a microfiber cloth and firmly pushed the bubble from the top of the bubble and "out" to the bottom of the screen. (I moved it to the closest "escape" path. Had the bubble been towards the top, I would have gone UNDER the bubble with the cloth and pushed it UP and OUT through the top).
C**R
Works great in the sun, however it mutes the screen and low light conditions.
I just installed this. I probably should have read other reviews first regarding how to line it up. Start from the top left. The angles aren’t quite perfect in the right side. Having said that, it is fine and looks great. I didn’t realize when I read the reviews that they weren’t all for a matte finish. The good is that it really limited fingerprints and does help a bit with glare. For my personal taste, the screen looks almost too muted. I have a tricky spot that I need to pull into and if feel like it makes it a bit more difficult to see especially when dark out. I kept thinking I needed to peel off more plastic on the front. Then I realized there isn’t any..I think if I really needed this for glare with a lot of bright driving conditions it would work really well. I mostly wanted it for protection and I’m struggling with the reduced visibility in a low light. It’s not awful. It’s just not quite as crisp. On the bright side I think I figured out all the tricks for installation lol and I just ordered the glossy version of it (the price is great so this didn’t hurt as much as it could have) I will say during install when I cleaned the screen, I was a bit freaked out about how much dust seemed to be floating around in my car lol I had a spotlight on it so I could make sure the edge is lined up. But once this one was on, it looked fantastic. It didn’t leave bubbles where some of the pieces of flying dust had been. I was really surprised about that. There were maybe one or two bubbles from spots it didn’t adhere to initially, but they came out super easy just by putting some pressure with the palm of my hand and dragging it across the screen. It also held up really well when I lifted it up, (probably four or five times) in different spots to see if I could peel anything off the front of it and it laid back down with absolutely no problem. My biggest issue is the muted picture. Just be aware if you are using this to pull into a very tight garage in the dark it might obscure your vision too much. So get the glossy one instead.
C**O
Quedó perfecto, están hechos justamente a medida, si los pones bien, no se verá que tienen mica
S**L
2 of 3 does not fit 2025 model. Only the 14.5 inch screen protector fits.
T**.
Very good quality
G**A
Overall, great quality screen protector. Fixs with 2023 Lexus RX500h. You might need to peel it off a few times to adjust the angle. (Otherwise, there will be bubbles underneath). Make sure the car is not dusty during installation.
Trustpilot
4 days ago
2 weeks ago