Bantoye 10 Pcs Needle Tip Glue Bottle Applicator DIY Quilling Tool Precision Tip Glue Plastic Liquid Dropper Bottles (30 ml)

Great for gluing tiny things! Great product and seller!

These teeny bottles worked perfect in doing more detail work in tiedye. I really enjoyed using the smaller bottles. Easier to control the flow and no splatter.

Perfect for Glitter Tattoos! It takes a bit of effort to pull out the needle tip but once you do, these are perfect squeeze bottles to apply glitter to small areas. I love these! The only negative thing I can complain about is the plastic is not transparent and I cannot see each color. They are a bit cloudy but Its not terrible. I recommend!

EXPECT this 4 star product to clog. I have no problem with almost liquid stuff, but thick paint or glue dries in the tip fast. I replace the cap immediately, but have a narrow straight pin there all the time. If my glue is non-toxic, I blow it back out of the tip into the bottle frequently. This bottle is the BEST way I have found to spread tiny amounts of glue.

I purchased these bottles for DIY projects that required tiny amounts of resin placed in precise places. These worked perfectly for that. I used these to make some "shaker" badge reel toppers for myself. I placed resin in one, and oils in some others. They old just enough, and not too much, for my projects. They are very easy to use, and the narrow pin-point design of the tip is perfect. If you are going to empty them and reuse them, you might need to invest in some small utility brushes, because as one would expect, with their small sizes, they would be hard to clean without a small brush that would fit into them. The color as a translucent white, so although they are not clear, you can still see what you have in them. They were perfect for the project that I used them for.

Works great for Tamiya thin glue. Clogged up after one use with super glue.

They work okay for what I needed them for - Medium Flow and High Flow Acrylix Paint filling of etchings. The high flow acrylic paint has a bad tendency to leak out from the threaded part of the cap, even though it’s marketed as leak proof, so I often end up with paint-covered hands. Also, the high flow acrylic paint drips out with no pressure, because it’s too low viscosity, so I’m have to find a smaller needle diameter bottle.

Purchased for multiple uses - mostly to have various glues (CA/Wood/Tacky) in smaller applicator bottles for miniatures and for colored glues for another project. The main things you need to consider when buying these is (1) how you'll fill them (the opening is very small) and (2) if you need to reuse them with something else. I'll address that after my overall impression. LOVE these bottles - they're perfect for carefully applying glues to small parts. I was also able to get a steady flow with Elmers glue without surges & very few air bubbles. Never had trouble with the metal nozzle clogging, but a sewing needle or pin should easily clear any obstructions that may occur. I love that you can remove the rubber topper & attachment loop without removing the nozzle - I needed it out of my way in one application, so just removed it easily, then put it back on when I was done. I honestly might buy another round of these for other glues or for paint - I can think of so many good uses. HOWEVER, it is worth noting that the thicker your glue/paint/whatever substance you're putting into this, the harder you will have getting it to come out steadily without hand cramps - it's just obvious at this nozzle size. But the screw-on lids never budged for me. I would be hesitant to use with water or bleach (non-viscous materials) in that I can't guarantee you'd have the precision & control you probably desire. As to the aforementioned notes: (1) I was able to fill these fine with my Elmers glue bottle tip as well as the Aileen Tacky Glue, but struggled with the wood glue as well as my glue/paint concoction that I mixed on a plate. It's not impossible - I just used stir sticks to drizzle it in while making the bottles suck the glue in, but also worth mentioning that I'm very patient. There are mini funnels you can purchase for micro glitters that should help. (2) For my paint/glue concoctions I realized that the small opening would cause issue for switching out colors. I had a fluffy pipe cleaner that I used to help the process with soap & water, but might be tedious with multiple switches. Liquids I've put in these with no issue: - Aileen's Tacky Glue - Elmers Glue - Wood Glue - Acryllic Paint (a little too thick for this applicator, but not impossible to use)

Perfectos para el pegamento o goma traga cantos.

Facilite les petits bricolages, facile à remplir et à nettoyer, évite d'utiliser les grosses bouteilles.

It takes time to fill these little bottles with your glue, however, when done, the glue lasts a long time. The tip is great on it. I put an elastic around it, to put the lid in it & put a push pin in the elastic as well. That way, if the tip clogs, you can use the push pin to get the tip clean again. It works great for designer paper that is thin or your thin card stock on cards.

Excelente, súper, muy buenas para el masking fluid...enjuágalo rápido y así no hay problema de que se tapen. Yo le pongo un plástico adherible entre la tapa y el cuerpo para que no se ensucie la aguja si no lo voy a usar pronto. Lástima que es importado y no llega el mismo día :( eso me ha detenido de comprar mas!

I am a painter and use these to make marks with in and acrylic paints on top of my watercolours. They work well, but I didn’t realize the needle tops are a wider gauge than the first ones I bought from Amazon. Makes for interesting, but lenses controllable results.