Foam Power Grease Be Foamed 1QT

Description

Using this highly effective, yet low impact, cleaning solution will allow you to clean your equipment of grease and oil build-up. The foaming action is perfect for cleaning the nooks and crannies of engine compartments, or other hard to reach areas where grease and oil can accumulate. The foam will stick and continue to clean for several minutes before needing to be rinsed the foaming action also dramatically reduces the amount of cleaner needed for each wash. This powerful combination leads to significant $$$ savings in time and chemicals! When used with quality foaming equipment, it reduces the number and amount of chemicals needed, while reducing all that time lost to cleaning by limiting the number of steps needed! The lower need for powerful pressure washing is safer for seals, bearings, and decals. When transformed into foam, your cleaning chemistry is stretched 10 TIMES over! Recommended for use with the Foam Power Foaming Equipment. Available at Robertson Racing LLC. Foam Equipment available from .5-50 gallon capacity units. Directions : Remove the larger chunks of mud from the car, allowing the cleaning chemistry to reach the surfaces to be cleaned. Use 6-8 ounces of Grease Be Foamed per Gallon of water. Add Grease Be Foamed after filling the equipment with the desired amount of water. Do not increase the ratio of chemical to water. Apply the foam in an even film with a sweeping spray motion from the bottom up. Do not over apply. Allow to soak until the foam begins to run significantly. Do not allow the Foam To Dry! Agitate the soil by rinsing with a hose sprayer, powers washer, etc. brushing when necessary.