Ecraft 12" Guillotine Paper Cutter：Paper Trimmer Accurate Cutting with Safety Guard,15 Sheets Capacity,Magnetic Guide,Heavy Duty Metal Base, Perfect for Cardstock,Cardboard,Vinyl,Crafts & Photos

This is a SOLID paper cutter! The base is METAL! It's fantastic VALUE. I like the two movable guards, they are simple and effective and aligning your cuts. The base also has a great clear measurement layout printed on it. It cuts very cleanly.

This unit seems well made. The entire base is metal and solid. I just got it today and have already used it. Cut seems clean and square. I like the two holdown brackets that come with it. One sits next to the blade that holds down the paper right at the point of cut. The other bracket sits opposite the blade and assists in keeping the left side of the paper flat. These brackets are plastic and may break over time but for now are functional. Time will tell, but for now I like it.

Heavy duty, easy to use, cuts great

I bought this to cut down multiple sheets of tissue paper. It was perfect for the project I needed and cut 9-10 sheets effectively. After several stacks it did begin to dull and have trouble with cutting the bottom half of the paper so I had to reduce the stack. The magnetic guide is super helpful to keep my paper lined up in place for perfect cuts and prevent slip. I used it more than the plastic guard. This worked great for my project considering the price point I have no regrets.

It was easy to put together and it cuts great. It is light weight, so easy to transport. Several different measurements on the board.

I bou7ght this to trim card stock into labels. i used one sheet at a time. here's what I found: 1. Assembly was one step. 2. Instructions were difficult to see but not understanbd. All pictuyres. 3. The blade is integral to the handle. It uses a scissor-like action, but the blade is not sharp like on more expensive units. 4. Higher contrast markings on the surface would be nice. Lines are not always easy to see, especially if you have vision issues like me. 5. On long cuts, the end of the letter-size sheet would not cut well. It was like the blades did not approximate each other well. Also, the edge tended tu lift and give a slight curve on the ends of longer cuts. 6. The top edge guide is formed by a a bend upward of the top surface metal. It has a rounded corner that doesn't allow a definite squared stop, allowing the paper to ride up on one side giving a cut that isn't square at the paper corner. 6. On thin paper, it didn't always cut smoothly. So, it did the job for me for this task. I don't recommend it for any job where precision is important or where thin paper is used. It's reasonably sturdy and you should be able to sharpen the blade (square its edge) if ever needed. I probably wouldn't have bought it if I had seen it first.

This arrived today and is everything I was looking for. I need to trim photos and documents some time. The blade is sharp and it is easy to use. It should last a long time.

Wife is a maker/crafter and always needs high production capacity for cutting product - this works well but needs a laser for alignment consistency and accuracy however that would mean paying a LOT more for it.... Soooooo Two Thumb's Up - Highly Recommend it

Sağlam bir şekilde elime ulaştı memnun kaldım

Buena compra, no tan buena porque no puedo cortar varios papeles en conjunto, corta como chueco si lo intentas porque se crea una presión. Pero sirve para cortar papel hasta 230 gr pero en pocas cantidades de hojas. Lo malo es que está un poco pesado

I bought this paper cutter with hopes that it would save me some time as I was cutting one sheet of paper at a time and since this cutter claims that it can cut up to ten I was very interested. Turns out the cutter can cut ten sheets of standard photo copier paper at once so this cutter will speed up the job 10 times. I will probably stick with 5 sheets at a time in order to get a consistent cut and to the right size. The cutter requires some assembly as the plastic handle must be pushed onto the metal cutting blade attachment. This task was very easy and I didn't need a hammer as per the included instructions as mine just went on with an easy push. The cutter comes with two guides, one has a magnetic back which sticks well to the metal cutting surface and the other has a raised edge to help keep my fingers from getting too close to the blade. The metal surface has many lines to help with alignment and many of the standard paper sizes are shown. There are imperial and metric measurements repeating on the cutting surface to also help with proper paper placement. The blade is sharp and had no problem going through with a clean cut on ¾" high density foam and thick heavy duty two-ply cardboard. This cutter from Ecraft is a great addition to my paper trimming requirements as the job will go much faster.

Great product - exactly as advertised

Perfect