Magnetic for Samsung Galaxy Z Fold 5 Case [Compatible with MagSafe] Slim Translucent Matte Hard Back & Soft Black Bumper, Military Grade Drop Proof Cover, Shockproof Phone Case

I don't usually leave reviews. I have seen other reviews where people have had quality issues but i have had none. Yes the case is flimsy, but that's kind of the point as it is very thin. For me the best thing about it is its one of the only cases i have seen that offers the ability to be locked on (via their hinge pieces.) without actually covering the hinge and making the case bulky and ugly. Getting upset at a case for breaking after a drop is like getting mad at airbags for deploying after a crash. The point of a case is to protect the phone in a drop. If the case breaks then that's just the way it goes and you should be happy it saved the $1k plus phone. I also have the samsung s pen case and while the materials on it are wonderful, i can not get past the idea the front is only held on by adhesive, it constantly comes loose and is very very annoying. This case solves that with it with the hinge they have designed. I dont wireless charge as it makes phones very hot and i don't like that, BUT i do use magsafe and the magsafe on this is very strong and usable, the shape of the phone prevents normal magsafe accessories from fitting properly, but that's the phones fault not the case. But magsafe mounts for car and desk work great.

I don't know why this case has been running under people's notice, but wow, just wow. First off, the magsafe, works. The magnet is powerful. It keeps charging unlike the torras case I had before (which was fickle). This case has nearly the exact same feel as the Torras version, but at a fraction of the cost. There is also zero glue points. No unecessary stickers to keep the case together. Instead, both sides are held together by a unique hinge connected in the middle of the case on top and bottom. I feel it's keeping the case sturdy and together and nothing leads me to believe it's going to weaken or hurt the crease. If anything its inclusion keeps both sides snug while in tablet mode. There is no place for the spen, but to be completely honest, trying to house either of the pens (new and old versions) outside the phone leads to case makers creating meaty cases with a ugly tumor in some place to house the pen. The pen is more gimmick than usefulness in my opinion. The case is light and thin. It's semitransparent. It feels good to my fingers, but fingerprints, they collect. The cameras are slightly exposed, I would have liked a bit more of a raised bed for that. I can't speak to its drop protection or any claims the makers are making for it. I feel it could guard against a flat drop from a foot or so, maybe a light edge drop, but anything more than that would probably lead to damage. I've been on a journey to find a case for this phone for months now. I've found some decent one's (Spigen, Caseology) some awful ones (Otterbox, Torras and, sadly Nillkin), this has upstaged them all. Worth the purchase.

It fits great, there is no screen reduction like other cases have, but the skinny piece in the front is very flabby and will break quickly if you mess with it.

This was one of the cheapest/simple cases I've bought for my Zfold5. It's probably the 4th or 5th case I've purchased because all of the others broke so easily. I was surprised that it seems to be the best one of all of them and I paid 1/3 the price! It doesn't provide protection for the spine of the phone, which is not the best, but overall I think it's a good case compared to the ones that kept breaking.

This case is for the person who never drops a phone and is always at home. Cheap, flimsy and I must of read it wrong no face cover. The minute this phone hits the ground my phone front is gonna Crack into pieces. There is no protection plastic to help in case of a drop. Don't waste your money. The case itself is light weight not bad but does the magnet do its job.. That I really don't know yet it seemed OK. Weird didn't cover the entire phone on rhe back. Well already has to buy something else. Things happen and this unfortunately won't stand a fall.

So, I've had Samsung Z Fold phones for almost two years, and I love them, but have found cases to be tricky with them. Cases, for me l, are usually a once per year, or less often, purchase. I've had to buy them two or three times more often with these phones. I carry the phone in my pocket, so I don't want bulky hinge protection. That means I've used several slim cases, most of which eventually broke on the front screen, left side. They also had a hard time staying on the phone, generally requiring adhesive that would later fail. I prefer clear cases, but found that the ones for this phone had very brittle material used for half the case, making them fail quickly and reducing grip. This case has the two pieces attached at the hinge, and I love it. It actually holds together! The slim strip on the left of the front screen does have a thin line of adhesive, but it's not critical for holding the case on, just keeping that small piece from flexing too much. Further, this case is slightly rubberized and is flexible, so I don't anticipate a brittleness-related failure and it does have some grip. This is highly recommended! I'll update if anything changes...

For the most part it is a good case. The two parts that let me does is the adhesive they sent with the case and the skinniest part of the case. The adhesive stick to the case readily enough but I couldn't get the plastic off the other side to stick it to the phone. So I had to go without, and now the skinny part of the front screen cover is cracking. Now on to the pros, the case provides a great hand feel when holding this slippery phone. The bumpers on the side work nicely, and the magnetic part works just like it's supposed to. Sadly since I've broken this case already I have to move on to something else. Hope this helps someone down the line.

Die Vorderseite der Hülle ist so weich/instabil, dass der Steg auf der Schanier-Seite keinerlei Schutz bietet und die Hülle auch nicht zuverlässig am Z Fold5 hält. Die Idee, die beiden Hälften über kleine Scharniere zu verbinden, hat mich die Hülle kaufen lassen, aber mit dem Material erbringt sie ihre Hauptfunktion nicht mal ansatzweise. Identisch zu https://amzn.eu/d/1su79yN, aber mehr als 3facher Preis!

I've gone through about 5 different cases for the z fold, never happy that the front section is often a separate piece. I don't like having a crappy screen protector which means that the front case sections are always flimsy and slide off really easy, making them untenable. I saw this case has a hinge connecting the front and back and was like THIS has to be the one. I'm super happy with it. Others have said it's a bit "flimsy" which I can't completely deny, but I'll add that it's more like a silicone case than a hard one so it has some flex, I wouldn't say it "warps" as it returns to shape. Key point is it stays on the phone just fine and I'm gonna stick with it. The fact that the front case stays attached and in place due to the hinge is the winning feature for me, and IMO every fold case needs this feature.

me gusto le bisagra que tiene en los dos extremos , le dan soporte que no tienen otros como el samsung, que trae pegamento, pero la parte vertical de la pantalla pequeña, se rompe muy facil

The case is very nice and love the fit and feel. Only reason it's not 5 stars is because they send you the little stick on strips for it but they aren't on the case already and it's very difficult to put on yourself. I. Feel it should already come with them installed and they should have extra ones in case they were to fail later on.

Was fine for about a month but the case has already warped and bent on one side. So much so it covers up a bit of the screen now. Poor quality.