

🌊 Step into adventure with boots that keep you warm, steady, and stylish!
The Cressi Isla 5mm Adult Unisex Crew Water Boots combine Italian design with high-performance features like super elastic neoprene, a hard rubber anti-slip sole, and a heel design tailored for open-heel fins. Perfect for a wide range of water sports, these boots provide warmth, protection, and secure fit, making them a must-have for serious water enthusiasts seeking comfort and durability.













| Care instructions | Machine Wash |
| Fabric type | Neoprene |
| Origin | Imported |
| Pattern | Solid |
M**W
Nice neoprene water boots. This review tries to help with PICKING THE BEST SIZE FOR YOU
I attached two size charts from Cressi for the ISLA boots that I found online. These are for comparison between what the charts recommended and what worked for my measurements as well as your general info to help find your best fit. Hopefully, comparing my measurements, Cressi’s size chart measurements, and your measurements combined with the commentary below can help someone find a good fit. When I refer to the boot size, I’m referring to the column in the charts with the header “BOOT SIZE”. You’ll see columns to the right on the chart with EU and US SHOE SIZE. You’ll see columns on the left of the chart for English and metric HEEL TO TOE LENGTH. These are used to compare your measurements with Cressi’s suggested BOOT SIZE. I reviewed lots of size charts, read at a lot of reviews, and tried several brands and sizes before getting lucky with these. In the process, I ran across reviews that helped me concretely rule out some boots and other reviews that helped me find better options. It’ll probably look like overkill, but I think this review can be helpful; I must have been bored or be avoiding something tonight. These are comfortable neoprene water boots and have held up well so far. First, some of my foot measurements: Shoe size: US size 10, wide (EE) to extra wide (EEE) Heel to Toe Length: 10 5/16 in. (26.2 cm) Foot Width: 4 5/16 in. (11 cm) The size charts indicated that a Cressi ISLA boot size 9 or 10 would be best for me. I ordered size 10 and it was a great fit. I’d go with the next size up if you end up between sizes like me. I put a yellow highlight and purple underline on the charts to help identify the line for boot size 10 in case anyone wants to compare the heel to toe length that Cressi shares with mine and your own. I included my foot width in case anyone wanted to compare it with their own width. I wouldn’t get these if your foot is much wider than mine and the charts recommend a size 9 to 11 for you. I had about the right amount of space in the toe (about an index finger’s width worth). If you get too much space between your toes and the end of the boot, you’ll end up with a pocket of water. I’ve had boot that fit like this, and it created a strong suction to my feet making them hard to get off when wet. Plus, water would slosh around in the toe when snorkeling in shallower water. One thing that doesn’t typically get much attention is the fit of the upper part or shaft of the boot (the part you zip up). At the top of the boot shaft, the circumference of your calf matters. The fit here is important because, like most of the sizing I’ll talk about, you want a snug/almost tight fit when you try them on dry. Neoprene water boot relax when they get wet. If they feel loose when you try them on dry, they’ll most likely feel too loose/sloppy when they are wet. You don’t want to have boots where the shaft cuts off your circulation when they are zipped up, that you can’t zip all the way up, or that don’t feel like are securely attached to your feet and legs – letting water wash in and out. To try and avoid this, I’ll share my thoughts about what calf sizes are likely to work with boot sizes 9 to 11. 1) Measure the circumference of your calf while standing barefoot. Take the measurement about 7 in. up from the floor. This is where the top of a size 9 to 11 boot will come to when you put it on. 2) My calf circumference measured 10 in. I can easily zip the boots up to the top, and they’re snug. I’d estimate that a calf circumference of 9 to 13 in. will comfortably fit in a boot size 9 to 11. Cressi uses what they call super elastic neoprene to make the ISLA boot. It’s quite forgiving, soft, and has good 4-way stretch. Interestingly, one chart specifies a “FIT TYPE” for the ISLA and the other specifies a “FITSIZE” for the ISLA boot. I circled these in purple on the size charts. The charts indicate that Cressi’s ISLA boot runs between small and regular for “FITSIZE” and regular for “FIT TYPE”. IMO, regular in both categories would be a better description of the ISLA boot. They were slightly tight on the top of my foot, but I’d much rather have that than slightly loose on the top of my foot which would end up feeling sloppy in the water. The open heel foot pocket on my fins has the following dimensions: 4 in. wide, 3 1/4 in. to 3 1/2 in. tall, and 10 in. long/deep. The ISLA boots fit snuggly in these pockets, but not overly tight. My fins felt securely attached to my ankles and feet when I was in the water. The sizing of these type neoprene water boots can be all over the place. It’s hard to tell what kind of fit they will have. Most people say go to your local dive shop for things like these and your mask. Actually, that’s a good idea for all your dive/snorkel gear, but you can save a lot if you can find enough reviews to lead you in the right direction, find some sale prices, and are willing to try a few times. It took me 3 tries to find these. Hope this info helps someone. From my experience, a snug fitting boot that feels somewhat tight when dry while not feeling overly tight or loose is critical for comfortable use of open heel fins (which I prefer for convenience). Overly loose/wide/long will feel sloppy and not securely attached to your feet. Overly tight/narrow/short will get uncomfortable quickly. Plus, a bad fit can make it hard to get the boots on or off. Final thoughts/opinions: 1) 5mm thickness is great when you get the right fit and it works well in warm or cold water (down to like 45 degrees). The various thicknesses is one of things that make water boot sizing difficult. 3mm thickness just feels lacking to me. Plus, you’ll typically get more substantial soles on a thicker boot. For example, Cressi’s 3mm Minorca tall zip boots have a wimpy sole compared to the ISLA 5mm boots being reviewed. Going from 5mm to 7mm neoprene is another discussion for those getting into very cold water. 2) Tall zip-up water boots are far better in any conditions IMO than low cut ankle boots. They feel far better attached to your feet, ankles, and legs. Low cut boots just feel like something is lacking and are less protective and cushioning…much like 3mm neoprene (which is usually what low cut boots are made of). 3) Water boots with heel and toe caps for added strength and durability are nice to have, but these features combined with the width and thickness of the water boot soles affects how well they will fit in the pocket of your open heel fins. You want a snug fit, but not so much that you struggle to get your foot and boot into and out of your fins. It’ll be clumsy and uncomfortable. This isn’t an issue for full-foot fins that fit bare feet. For these type fins, the sizing is a bit more forgiving and involves far less measurements. Boots and open heel fins are always better IMO. I mentioned size 9 to 11 throughout the review. I think that you could use a little algebra to extrapolate measurements for other sizes using the known values in the review. You can find more information on the Cressi website. The attached size charts are from their website. I’m just sharing my experiences in case someone finds them helpful. Note about Amazon sales: If you find something that is heavily discounted, don’t take forever to make a decision. I’ve taken too long to act and had the price change in my cart as I was checking out. Many times I’ve gotten in on something heavily discounted (like 50% off) and see the price double right after making my purchase. No idea why this happens so all I can do is speculate and be happy when I find and get in on really good deals.
L**.
Amazing boot!
Recently got back into scuba & tried the mares 5mm classic boot in my pool but my fins were creasing/rubbing on the top & uncomfortable. So I wanted an affordable 5mm boot w top protection, traction, ankle ridge etc & found these. Cressi is a highly reputable yet affordable, well-known & long-established brand. These were a bit over 40$ (mares=75$, scubapro delta5=89$) and every bit as good as those/maybe better! They’ve got AMAZING traction & kept my feet warm in Catalina in late sept (65F @depth), performed perfectly & held up great. I’ll also be using them in Hawaii. The top protection did its job, never creased, super comfortable to wear/didn’t rub the top of my foot. I also LOVE the extended sole & ridge on back lower ankle, it makes a huge difference for gripping bungee straps & keeping your fins on. Even tho my zipper doesn’t go all the way up and ‘lock’, I never once had trouble with the zipper falling down during dives. It seems very secure. I do kinda wish it had a Velcro strap at the top, but I think the width of your leg puts tension on the zipper and keeps it from falling, they’re supposed to be tight & it’s a heavy duty zipper. I have average size ankles/lower leg. I wear a size 7.5-8 women’s shoe & should be a size 7 dive boot. So I got the cressi isla men’s size 7 but they were just too big. With fins on, the boot was bunching/folding near my ankle, and I could grip/fold areas where there was just too much material, lots of toe wiggle room etc. so I went down to a size 6 (pics/vid after 9 dives); def tighter like they’re supposed to be & fit way better. I was never uncomfortable or felt like my foot was jammed in. Got a blister during my dives but I don’t think that’s from the sizing/fit. just normal rubbing from movement etc. Also I believe these ARE authentic, I spoke to some retailers (scuba.com etc) & they told me cressi designs all of their products in Italy & manufactures 90% there/Europe but that they do also manufacture some items in China, these boots included. The retailers verified that their Cressi Isla 5mm dive boots also say ‘made in China’. So rest assured :) But I really do love them. Amazing price, authentic, great construction/quality, I feel like they’ll hold up for years. Highly recommend!!!!
G**S
Best Durable Boot for the $$$ Right Now
These ROCK! The soles were tough enough for a nasty river bottom rock pit cut you deeper than love dive we did. Neoprene was eaten alive and these stooped the test and rose above everything else. They were warm and fit like they should. They alwere on sale and affordable for a Cressi product. The zipper locks up and they are easy on and off. I wore them around camp just to show off I still had a pair without holes when the dive week was over. Thank you for a good product that kept me warm in 52* F H20 for 1 hr+
W**S
Size is a little narrow
They appear to be decent quality. But rather tight in the width for the size. I wear a 10 but I need an 11 in these.
S**M
Great value and quality
Excellent fit and durable quality. Highly recommended. Good gription on the soles too.
T**X
If You Have A Wide Foot
I'm going to speak about sizing only. I wear 10.5 wide sneakers in New Balance and Sketchers. I bought the size 10 and they were crushing the sides of my feet. Very painful right away. I decided that it made no sense to go with a longer boot because the length was fine but the width was so tight that I just couldn't see an 11 fixing the situation, especially seeing how the big problem is the rubber toe cap. The rubber toe cap is not going to allow the boot to stretch. I made the decision to returns these and order the Mares Classic in a size 10 and they fit perfectly.
L**N
Best water boots for the price!
I LOVE THESE BOOTS! First off I am a gold miner so I do a lot of walking and I needed some water boots that not only protected my feed from frigid cold water but could also hold up to sharp rocks. I purchased these boots because of another review here that mentioned how well they did on volcanic rocks, I figured if they did well there that they would excel in fresh water creeks where I would use them AND THEY HAVE! :) These boots are far superior to any water shoe that you will find at Wal-Mart, Big 5 or any other store that carries water shoes. I have already walked many miles with these boots and put them through quite a bit of use. Any other water shoe would have been dead by now and on to my 2nd set. I have spent over $400 dollars on crappy water shoes in the last 5 years when I should have just bought these instead. You can not go wrong with the Cressi Isla boots, they are rugged for water boot standards, they are warm, they are comfortable and they have a sole that is hard yet yielding enough that it will last a long time while offering enough support to be comfortable on gravel and jagged rocks. The only negative that I can think of about these boots is that you still slip on some wet rocks, but even felt sole boots still slip a little too so it is not a big deal, just be mindful of where you are putting your feet in conditions where rocks are wet or in shallow water.
B**K
Good value and quality
Good fit, materials and stitching for the price
Trustpilot
2 months ago
2 weeks ago