Official Creality PTFE Teflon Bowden Tube 1M PTFE Tube for 1.75mm Filament for Ender 3, Ender 3 V2, Ender 3 Pro, Ender 3 Max, Ender 5 Series, CR 10 Series (1M)

good quality helps with print quality and you get enough for two foes so you can replace it if needed after a while

Capricorn are the go-to make to upgrade tubing. While Amazon only sell the XS version, it's perfect for upgrading nearly all OE tubes, it needs the TL versions for connecting to my CFS (so I can see if it's feeding correctly, as the TL is transparent). Not cheap, but you pay for quality.

Perfect. Long so you can cut it to whatever length you need

The bowden tube on my Ender 3 Max got burned at the hot end and damaged when I tried to remove it, so I bought this kit. It came with a spare pneumatic fittings which was handy because one of mine was a bit chewed up for some reason. The extra bed springs were a bit random but they do seem to be the same as the springs on the extruder so I guess they may come in handy for something! The cutter supplied does its job well and with a little care you can good, straight cuts that do not squish the tube, The kit has enough for a little over 2 replacement bowden tubes, so I cut mine slightly longer than the original, so it can be trimmed if the hot end gets burned and I'll still have a spare tube if I need it. Since replacing the bowden tube and fitting a new nozzle at the same time I am getting much better prints with fewer extrusion problems and extruder slippage. This is partly due to the new nozzle, but I think the bowden tube has helped because the surface finish is better than it was with the original tubing when I first got the printer.

This was purchased as I was having issues with the Bowden tube and thought if I was upgrading the tubing why not pick up a few other items at the same time. So all items other than the Bowden pneumatic connector (extruder end) have been fitted. For reference the items were used on an Ender3 V2 NEO. The extruder plate has a smooth bore so the the threaded pneumatic valve could not be fitted. The hot end valve was an easy replacement and does it's job. I haven't noticed the springs make a significant difference, the printer gets moved about more than it should and every time the bed needs tramming. The tubing has been fine and again, I haven't really noticed a significant improvement in functionality. The pipe cutter was useful in assuring a 90 degree cut The 0.4mm nozzles are pretty much standard mk8 nozzles. These must be cheap but I haven't noticed them being any worse than the Creality supplied ones. My printer pretty much runs 24/7 and these last about as long Creality supplied ones. Although I have now swapped to 0.6mm nozzles for most prints.

Work and does the job it meant to

I had to buy a new tube, as the one that came with my 3d printer ended up getting cut too short after some bad filament kept clogging it. It's amazing to me that the official, and best tube is also the cheapest! Great quality, and as it's official I knew it would work with my printer! Highly recommend.

Pipe had a lot of pinches in it so couldn't use a lot of it. The part I could use worked well.

The kit worked great, sadly did not fix the issue, but helped highlight what my printer issue was. Def worth it however if you know nothing else is wrong with the printer (such as a cracked heating element)

Arrivato fulmineamente il tubo è capricorn originale, si taglia in maniera perfetta con la taglierina acclusa e si monta in due minuti. Perfetto, funziona in maniera impeccabile. Le molle non le ho provate, ma mi sembrano un po lunghe e troppo dure.

Excellent produit, conforme à la description, remplace mon plateau en fin de vie

Très bon produit jamais déçu par cette marque, on sent tout de suite que le filament n’accroche plus par rapport à l’ancien qui était en place. Dans le kit il y a tout ce qu’il faut pour tout remettre à neuf et faire une coupe bien propre.

The capricorn tubing was OK. But the capricorn cuttet was a joke.