2*15ML Upgrade T-7000 Black Adhesive Glue

Works great. It wasn't very thick, good quality though, easy to use, black in color. I used it to secure s new replacement screen in my phone.

Appears to work as advertised. Comes with a very narrow tip which helped confine the bead to the outer edge during my attempt to glue the face of the fitbit back on.

Works as advertised! And the “nozzle” lays an extremely thin trail of adhesive which is exactly what you want it to do. Great product!

Two things I found the first time I used this: it cures slowly. Like, hours (give it a day). And it's thinner than I was imagining. Not quite watery but not remotely thick. It's also not all that sticky when it's first applied--clamping is needed. I used this to bond a few 3D printed parts (PETG) together (clamped with zip ties) and to stick some magnets in. The 3D prints were not remotely smooth so a bit more viscosity would maybe have been good. But this seems to be working. I like the small needle tip for precise application and the pin on the cap to maybe prevent or clear clogs. Since it squeezes out thin due to the low viscosity it should go a long way. This is a large quantity of glue for my normal uses and I hope it doesn't harden in the tubes before I can use it all (a lot of single-part adhesives in the polyurethane and cyanoacrylate families (home-center brands) seem to have a pretty limited shelf life once opened for the first time.) Fingers crossed. If I get to use most of it I'll feel like I got a pretty good deal.

Bought this to attach my replacement phone screen. It's held up great for 4 months. I haven't tested its waterproofing, and don't intend to, but I've already had a way better experience with this than the old method of using screen tape (which never held). Absolutely love the thin applicator tip, and the fact that the cap has a needle that inserts into the tip to prevent the thin tube from drying out and clogging.

Nice

Glue worked great. Had to buy it after the reps I kit. Wish it was included in the first place.

I used this re-install the back on my LG v60 phone. It worked great. The size of the tip right out of the package was ideal for dispensing a perfectly sized bead of adhesive on the phone. I had almost no squeeze out. And the pin in the tip seals so well, I should be able to reuse the tube somewhere in the future ( unlike a Super Glue tube).