Car ISO Radio Adaptor Vauxhall Quadlock

Description

This adaptor converts the vehicle specific radio connector to ISO standard and enables the connection of an external radio in your vehicle. i.e. voltage, 4x speakers, and depending on the model, switching voltage for power antenna and / or amplifier, Illumination, Gala signal and mute function. The radio installation is actually very simple and is much faster than you think in most cases. This is due to the now standard ISO connection which many radio manufacturers use. In this case there are only two connectors that belong in the radio, one for the power and one for the loudspeaker. For models where the ISO standard is not factory installed, there is a suitable adaptor at adaptereXpert. Everything you need to install a car HiFi, you will find here at adaptereXpert (Plug & Play). This adaptor converts the vehicle specific BMW, Ford and VW wiring harness to the ISO standard and enables the connection of an external radio in your vehicle. i.e. voltage, 4x speakers, and depending on the model, switching voltage for power antenna and / or amplifier. Please note> In most cases, simply connect the plug and everything already works properly. On some models, there is a non-standard pin assignment for the power supply connector. (switched exchanged with permanent - i.e. red with yellow). These wires can be switched or replaced according to the assignment in the vehicle. It is not the wrong assignment on our adaptor, but it is intended to make the adaptor for universal use. Compatible with Car Brand / Model > OPEL all models from 2004 and Astra Corsa Meriva Vectra Vivaro etc.