KeylessOption Keyless Entry Remote Fob Uncut Ignition Car Key Replacement for GQ43VT17T, 04602260 (Pack of 2)

Worked like a charm on a 05 jeep liberty. The owner lost the keys so I simply drilled out the old ignition switch replaced it with an aftermarket used the replacement keys to cut the chipped keys and programmed the keys and remotes to the vehicle. Works just like oem. Customer was satisfied and so was I.

Make sure you have the ability to program your new remotes before ordering, or check with your local locksmith to make sure he can. Cut the dealer out of their ridiculous profit margin and treat yourself to dinner with the savings on these.

Used Jeep Liberty 2004 only 1 key, no FOB. Cut these keys at hardware store that had a high end key cutter. Couldn't program myself, my local mechanic had the correct system. Programmed 2 keys & 2 FOBs for $70 + tax. Totally investment: $120. Very happy.

The description is a bit confusing and/or misleading. At one point it says one key is required and then it says two are required. Problem is that it requires two keys. Remotes programmed easily but I will have to get to a locksmith and have the keys cut and programmed."Ignition Key Programming - DIY Step by step programming instructions included, one working original keys are required to program a new key if you do not a have two working original keys dealer or locksmith programming is required ( key must be cut prior to programming)"

The remotes worked fine. Took both to get programmed as it was being difficult to do.It had nothing to do with the remotes it was the 2004 Jeep Liberty.

Their website instructions didn't work on my '04 Jeep Liberty. Undaunted, a web search came up with a number of different combos, one of which finally did the trick. Don't be afraid to try something else if they don't work for you right off the bat. For my Jeep:1 Press LOCK button 5 times at 2 second intervals to resynchronize remote.2 Insert key into the ignition switch. Turn ignition to the RUN position (as far as you can go without cranking engine). Wait for ignition chimes to stop.3 Using the working remote, press and hold the UNLOCK button on the remote for 4 to 10 seconds.4 Within the specified 4 to 10 seconds, continue pressing the UNLOCK button and then press the PANIC button (on the programmed remote) for 1 second and release both buttons. A chime will sound to indicate that the remote programming mode has been entered ( allow 3 seconds for chime to sound ).5 Within 30 seconds of the chime, press and release the LOCK and UNLOCK buttons simultaneously then press and release just the UNLOCK button on the same remote. A chime will sound indicating the remote has been programmed. Press and release the LOCK and UNLOCK buttons simultaneously and then press the UNLOCK button on each new remote you wish to program at this time. A chime will sound afer each additional remote is programmed.6 Turn the ignition OFF and remove key.7 Test Remotes.Now, on my rig, the first chime in step 4 didn't happen, but, following the next steps, the chime sounded as each fob was accomplished.Overall, these fobs are great! Next step will be to take the keys to a locksmith to see if the chip is programmable.

How much is a new key when you're locked out and desperate ? You know the answer... well save yourself the drama and pick up spares at a great price. We lost a set and luckily had a spare, that's because we planned ahead. We ordered these and they worked perfectly!

Turned out the electrical wasn't working in the vehicle, so remote control couldn't be programed and kind of pricey to get the key cut.