Heat Transfer Vinyl Black, Iron on HTV Bundle Supplies for T Shirts, Fabric, Clothing - 12" x 12" - 12 Sheets Works with Cricut, Silhouette Cameoand and Other Cutter Machines

Description

✪ ApplicationInstruction: 1. Pick you design2. Reversethe pattern and cut it onto the vinyl sheet with a craftcutter3. Weed out the excess to revealthe pattern4. Heat an iron on mediumsetting Pre-heat your iron to 160°C,NO STEAM5. Warm the material on which the design is to betransferred6. Make sure there are nowrinkles on the material7. Place thedesign, glossy side up, on your cloth8. Place teflon sheet over the vinyl sheet9. Use the iron with medium pressure on the pattern to transfer itto the garment10. Press for 10-15seconds over the entire pattern and remove the iron11. Check the design, if any part of the design lifts or peels,replace the Teflon sheet and reapply pressure for another 5-10seconds12. Cool peel off the backingand your garment isready✪ How to heattransfer? Transfer Time:10-15s Peeling method: Cool peelingTransfer temperature: 150-160°C Transfer pressure: 20-30P  (Above0.2kgf/cm^2) ✪ Note:1. These vinyl sheets are COLD PEEL2. If you are having trouble, try turning the shirt 90 degrees andpressing again, this should eliminate problems from coldspots3. If you've already ruined oneshirt, keep using it to experiment. Cut small pieces of heat transfer and tryraising or lowering your temperature, or pressing longer or for lesstime4. Keep in mind that more is notnecessarily better. Often when people have trouble they raise the temperaturebut that may be the wrong thing to do, sometimes you need to lowerit5. Not suggest to make tiny picturesor thin lines (because if the picture you want leave the layer, it should be stickagain by glue)