MotoFabLifts DR-5-1/2 inch Front Leveling Lift Kit That is compatible with Do...

I used the Bilsteins up front set at 2.1” so as to opt for a softer ride, and added these 1/2” spacers on top of the assembly to achieve a full 2.5”. I did press out the factory studs in the top hat and press in new 1/2” longer ones, it probably is just fine without going to that trouble, but if you have the time and the means to do so, I would suggest it.

Fit my truck perfectly. This spacer is approx 3/8” thick, which gained me about 3/4” lift on top of my already installed Bilstein 5100 set at 2.8” for a total lift of about 3.5” (40” ground to top of fender wheel arch). Plenty of room to clear 35” tires.

Very simple to install with the right tools. Install took about 1.5 hours for both sides and gave my Ram Rebel a bit more fender clearance for the tires with my new 18" X 9" Method wheels installed.

I’d have liked if they could have provided increased length studs because it’s on a thin margin of the length of stud you have to work with. I’d recommend loctite to be safe.

Bought these for my 2010 ram 1500. The bilstein shocks I installed for a leveling kit settled, these spacers brought it back exactly where I wanted it. Highly recommend for any Ram 1500 from 09-2018. It may fit other models

Strait forward. Lay it on top of your strut assembly before you bolt it back to the truck. I added this on top of Bilstein 5100's on the highest setting and ended up with exactly 3" of lift total. USPS lost this order and Motofab sent another set right away. The first order still is no where to be found.

Added to 2019 Ram 1500 Lonestar on top of Bilstein 5100 at max setting. No issues, solid metal

Lifted Exactly 1/2. Perfect!