Motion Sensor and Pager, so you know when they are getting out of bed

This is a great device. I bought it for my 99 year old mother so we know when she gets out of bed and can go and help her. It works very well and are really pleased with it, but the only thing that would make it perfect is if the pager alarm had a volume control. It is very loud, which might be good for some people or in certain circumstances, but for us it was far too loud. I was going to return it, but I had second thoughts as it is a great wee pager, nice and small so can be carried around very easily. We got around the problem of the loud alarm by either putting it under our pillow at night when we're sleeping, or under a thick cushion during the day. This makes the alarm just the right volume - you can hear it clearly but it's not too loud. It has two choices for the alarm, and my advice is to use the simple ding dong. The other choice is the tune to William Tell, which again is too loud and goes on a long time, but this may be good for some people if they need to make sure they don't miss the alarm. The bottom line is, yes this works very well, and is not too pricey.

Very sensitive, works very reliably to detect any movement if my elderly mum attempts to get out of bed. As mentioned by many others, it would be really helpful if it had a volume control!!! - the ideal for my purpose, and most other reviewers, is for me to hear the alert but my mother not to be aware of my monitoring. Fortunately my mother is quite deaf - but could be quite confusing or worrying for elderly or dementia patients. One other small point - the switch which switches between OFF and choice of two alarm tones, is very minute and in my haste to switch OFF the “door bell” signal when the alarm sounds, I can end up inadvertently setting off the “William Tell” signal which won’t stop till it has finished!!!! - annoying in the middle of the night. Otherwise, brilliant!

Excellent product with good range and loud enough ,you can’t miss it.

This was the answer to our monitoring problems, for a very elderly patient at home, who was confused enough to try and get out of bed, who could not cope with cot sides which gave them claustrophobia, and was a danger to themselves through lack of stability when attempting to stand up in a confused state. The under mattress sensor we had worked well until a ripple/air mattress was required to prevent bedsores, so we needed an alternative to provide an alarm for when the patient tried to get out of bed - night and day. This sensor worked brilliantly. We needed to rig up a cradle to sit it in with duck tape on a pole at the end of the bed focussing from the middle of the room towards the patient/edge of the bed, in order to position it exactly where we needed it - and we turned it sideways to narrow the beam so that carers could be in the room without setting it off. After those adjustments which were specific to our requirements it could not have done a more excellent job. We did site it for a while, using the hinged stand attached to it, perched on the bed post, but as the patient became colder, the height of the bedding increased and the bed post was not high enough, so a pole was necessary. In spite of all that, it was discreet enough for the patient not to be aware of it, which they were of some other alarms - they never understood how someone appeared so quickly, as a result of this monitor. It could have been placed on the wall above the patient's bed facing into the room, but this would have meant the alarm being triggered every time a carer came into the room, which we wanted to avoid. Locating the beam does need some careful thought. It was reassuring to know that it would be triggered by the patient's movements only, and we preferred a few false alarms (eg arms waving when patient was hallucinating) than worrying about the patient when not in the room: before I discovered this product on Amazon we had someone in the room supervising the patient at all times, which became unsustainable. As a result of this alarm we had peace of mind, reassurance, and optimum care for the patient and more freedom for the carers to do other tasks . Battery life was good and they were easy to replace. I thoroughly recommend this product for the use I have described. All the professional carers as well as family agreed it was outstanding. My only suggestion would be to supply - or provide the option of - an additional, mobile or plug-in receiver which we had with the other monitoring products we used, and we found having two receivers helpful - admittedly not essential, but a bonus. The mobile receiver worked well through the thick stone walls of the house, which was not always the case with some other receivers. It occurs to me it would also be a useful product to align on the edge of a cot for when toddlers start trying to climb out. A minor point: I have a good sense of humour but your headline (No Alarm In Room With Sensor or Patient!) is confusing to prospective purchasers, who will not necessarily get the pun.

Don’t understand how you can put the sensor underneath the pillow it does not work. I put it on the unit and as soon as my cat walked past it off and it last for five seconds or by God it’s like a house going off you can’t turn it down And it is so loud that is all the reason why I am sending it back. This would work if you had no animals reason by Water as my mum has Alzheimer’s and she will get out of bed without shooting on me sometimes.

I am absolutely delighted with this motion sensor and pager. My husband needs assistance with visits to the bathroom, and I now know when he is getting up from bed during the evening, or mornings when I’m no longer in the bedroom, and in the night it wakes me before his movement does. I no longer fear his falling because I am not at hand! I place the pager under my pillows at night, or under a cushion if I’m up and about, which definitely softens the sound of the alarm bleep. It is most definitely proving to be a real godsend!

This is an excellent device, it hasn't failed to wake me if my mum, who has dementia, gets out of bed at night. I just leave it on the floor pointing at the space next to her bed. Needs 5 AA batteries, not included, three for the sensor and two for the pager. The alarm is loud, two tones available but no volume control. The hospital provided a pressure pad sensor which is useless. They should be using these instead.

Do wish that there was a volume control as it's a little loud in a small home environment. Although the instructions state that it doesn't come with batteries - it does - and they are already fitted you just need to remove a little bit of protection to use them. The really annoying thing is that when you switch the remote on it always plays a tune or beeps very loudly.