JMT M.2 NVMe M Key to Oculink 4i / SFF8611 Extension Cable PCIe4.0 X4 Gen3 4 Compatible with T10 / SAS-4 SFF-8612 (15cm)

Extend the life and usefulness of your laptop or miniPC by using your spare SSD slot to host an external GPU via Oculink. Works exactly as described, which is excellent. Be aware, the wires are pretty stiff, making it difficult to "stuff" away any slack - be sure to order as close to the exact length as you need, or you may have issues with the excess.

Si vous avez un dock egpu minisforum deg1, c'est un indispensable pour que votre gpu soit détecté et utilise les 4 lanes pcie 4 de votre port m2.

ミニPCでoculinkポート増設のために利用。 ネジ付き、かつ端子がネジ止め位置より出っ張っているのがこの商品の良いところだと思います。ミニPCの外装を切抜きしてネジ止めで拡張することができました。 ただコードは硬めなので狭いスペースでは自由に取り回しできる感じではないです。 1点、このケーブルが理由なのかpcieスロットの仕様の問題なのかはわかりませんが、oculinkの電源連動は使えませんでした。

It has Pcie4 x4 speed as advertised but I needed to use insulating tape to cover those exposed single cables so they don't loose signal by slight touch of metal of my case.

752 / 5.000 I chose this Oculink adapter based on the advice of a user on Reddit. Before that, I had one with a flat cable that was good when it worked but I would have trouble getting it to work. The problem was that until it recognized the external graphics card (my configuration is a Kodlix AD69 minipc - Ryzen 9 6900HX and an external GMKtec AD-GP1 - Radeon 7600M XT graphics card) I would have to restart the system several times, and even reinstall the drivers because both the internal and external graphics cards are on Adrenalin drivers. It used to happen that the sound would stutter and the entire system would slow down, but now everything works from the start and without errors. I even contacted the manufacturer GMKtec, but they couldn't help either. So I decided to try this adapter, which has separate cable wires, and I was not mistaken. All recommendations.