BLACKHAWK SERPA Quick Disconnect Kit (2 Female/1 Male)

This can make for a good holster mount if u don't mind the 1/2" hang off your side. Well I do! But!, it wouldn't matter if your mounting it to a wall, table, cabinet or something like that, so! I've been toying with the idea of using it for a permanent truck holster mounting job. I think it will just have to much over hang to snag on something if I wear it off my side or off my leg rig and u can forget concealed carry with this. The iron sights will cut into your swing arms while walking if off the side. So I think I'll use it for a permanent truck mount. And i got another holster but left handed to work off the left side of the console in my truck, and I'll move the gun around and not the holster. I also plan to buy yet another holster to use off the side handle on my bed mattress, it works perfect! But on a side note. I Wished Blackhawk would just make the one half outfitted with belt loops!! Or reduce the thickness by half. Also I Just wanna add I'm using the Viridian ECR, C5l-r holsters with my XDM sub compact 3.8" .45 acp.Ps: Just like others said the mounting hardware can be a pain!!! There all brass painted black the screw, screws in the self locking nut that u have to press into the plastic yourself, and if the damn self locking nut doesn't lock into the plastic trying to screw the screw in tight is impossible!!! One hole in generally if u look closely u can see two holes side by side and looking like a figure "8"! Don't use them damn holes the nut will just start spinning when u start the screw good and then u can't tighten it or get the damn screw back out! I had to learn the hard way and using my fishing needle nose pliers to get a grip on that soft brass nut! Blackhawk !! how hard would it be to just incorporate the damn brass threaded bushings into the female half ?! Other then that They should call this mount a stick up! Lol mounting stick up for holsters to be mounted in handily places. Not really in mind to mount off your person. Or to move holsters around! Just your pistol. I give it a three star it looks great in my truck! I'll add pics.

5 Stars for product that is REAL, make sure yours is not counterfeit.Received on Being sold by Lei Ding. Very good counterfeit, but still not compatible with the actual values. There are slight differences and it does not mate up with the identical Blackhawk gear. I have bought the same item on Amazon twice, and from firearm stores two other times. I found this one to fit snugly and not work well with my others.When I started to look closely the plastic is not the same, lettering is not the same, depth and witch is not the same, and that is what is causing issues. I plan on reporting to BlackHawk. This Chinese counterfeit items have to stop, and Amazon should not allow them to be sold.e sure your is not counterfeit.

Edited to clarify: I contacted Blackhawk and they sent me a replacement to compare and it did not match with the kit I received from NCSYSYNice online sport. I was told that they have never changed the molds and the parts should be the same. The two kits did not interchange well, that is what caught my attention.Added picture of the male adapter that Blackhawk confirmed was the real part, direct from Blackhawk so you can tell which is a confirmed Blackhawk part. The real Blackhawk part is the tan/coyote, notice the bump on the tab. Without the tab/bump it does not fit the Blakhawk mold very well and the Blackhawk male does not fit the NCSYSY female well at all.The female adapter from the NCSYSY kit was tight when using the confirmed Blackhawk male adapter..Update: NCSYSNice did contact me for more information.

Overall i love the quick disconnect system, can move my pistol from my chest to my paddle holster in seconds.Grab my pistol and paddle holster, plink at the range, head home, quick connect back to plate carrier in 2 seconds. Keeps your plate carrier nice and low profile when the holster isn't mounted. Another cool thing, is u could mount one of the female adapters on pretty much anything that will take screws, then you can quick disconnect to and from whatever you mounted it to, ...a world of possibilities is opened for mounting a pistol. Heck with some epoxy, you could use this quick disconnect system for anything, not just a pistol. Just make sure you leave enough room behind the thing your mounting to actuate the disconnectors, or else, lol, your going to feel dumb.

I honestly expected much more from blackhawk I won't get into the hostler because it's specific and it has a lot of problems too to put it short.First you will most likely loose your belt tensioners / retainers whatever they're called, and I'm not sure of an easy way to get replacements, then you're going to get a lot of back and forth wobble unless your belt height matches the holes height. They will pop off and you won't realize it until you go to take everything off, well you've lost one, dang.Secondly, the pin that holds the retaining levers (that lock into the gears) in place will start to ride out, check it often (not as in daily but every week or so) if it's your EDC. I caught mine the other day probably about to pass the point of no return where the spring might have popped out or something else, I don't know I haven't taken it apart to see.Finally, I have to admit though this /is/ a sturdy product. If you can get past all its faults, it'll take a hell of a beating and falls (with person attached) like a champ.

I am glad i got this as its super easy to switch between rigs. I have a belt holster and one for molle. And this allows me to go between them with easy.I only wish that they labled the screws that came with it. As i got three bags of screws.

Pretty solid kit. Having two female parts rather than two male parts is beneficial. It's good being able to not have an empty holster sitting on my chest when I'm not carrying. The mechanism doesn't allow for much fine tuning of the angle of the holster but luckily one of the set angles works for me. I can reach and draw much faster with this than with a belt holster, particularly with a molle tac vest.

▪️Switch between holsters and platforms quick and easy, solid it doesn’t wobble.▪️Pushes your holster out 5/8” more from mounting directly on platform. This is closer to where your arm naturally falls so I think this is positive.▪️Mount the male fitting (thing that looks like an AR bolt face) to your holsters.▪️ Mount the female fitting to belt mounted platforms, molle system or even screw it to a wall. (I have seen them mounted into vehicles and under desks.)▪️ Share the same platform between various types of pistols or holsters for light bearing holster.▪️ Rotate holster on platforms easily requires two hands but is surprisingly easy.

I wanted to get a quick disconnect setup so I can use the leg platform and my belt platform for my P320. I found this setup and it fits the bill.I put the male adapter (the one that looks like a gear) on the holster. I put one of the other ones on the leg platform and the other on the belt attachment. Now I can easily switch between the two.I had to use the screws that came with the holster to attach the male adapter (looks like a gear). For the belt attachment I had to use the small spacers on the onside and the rounded head screws on the back and once it garbed the space I was able to tighten it and it would hold securely.

Leider war das zusammenbauen nicht so einfach wie gedacht. Wir mussten mit einem Akkuschrauber ran um alles zusammen zu bekommen, jedoch ist nichts scharfkantiges vorhanden und dennoch ist die Verarbeitung sehr gut. Mit ein bisschen Gewalt hat es dann auch funktioniert ;-)

Gibt es wirklich nicht viel zu sagen, gewohnte Qualität zum sehr hohen Preis. Blackhawk halt. Ich benutze da Zeug dienstlich.Das ganze Geschraube ist ein bisschen Arbeit.