Motta 35cl Stainless Steel Professional Milk Pitcher, 11.8 Fluid Ounce, Red

I have this in the 17 oz size but it wasn't quite large enough for my needs. I like to froth enough milk for two cappuccinos to divide into two 6 oz cups, so I needed to start with about 8 oz milk (in my case, a mix of 6 oz half and half plus 2 oz. whole milk). I was previously using a total of 7 oz in the 17 oz pitcher but it always overflowed. Using a full 8 oz in this one lets me get more foam and it doesn't flow over the sides, so I'm a happy camper. I've tried an embarrassing number of pitchers, but this one is the best. There's something about the shape, and it works for better than the bell shaped type pitchers. Worth the money to me as it's heavy stainless and very well made, and I can get a super amount of perfect froth in it.

This pitcher is larger and is made from thicker steel than my Fellow pitcher. I appreciate the heft, and I suspect it helps when frothing milk and you are judging the temperature by the feel of the bottom of the pitcher. The larger size is good, even if you are only using it 1/3 full, to allow for frothing expansion, or making two milk drinks at once. So I am glad to have it. It is a bit expensive, but its Italian and made to last.

After trying it out for a short while (very short while): # The Bad - The shape of the pitcher is different, requires different way of frothing from what I am used to (so in the video, I frothed the milk using another pitcher instead). - The 17 oz pitcher is too small to properly froth sufficient milk for a standard 8 oz cup - The pitcher is stainless steel, pretty thick. Due to this and directly under aircon, I find if I am frothing using another pitcher, I need to put hot water into the Motta pitcher first to warm it up before pouring in any frothed milk, otherwise the shock will kill the froth - The pitcher feels bulkier, and a lot harder to handle due to the different design of the handle - Not for beginners # The Good - You get a higher quality Latte Art compared to other pitchers (of the same spout design) - Relatively easy to do larger/fatter designs - The thick steel retains the frothed milk for a longer duration (so long as it is not on a chiller or directly under the aircon) - Easier to cut the latte art with milk (& sharper cut), with an nicer finishing # Conclusion - For RM 4xx , I would consider this as a reasonable and low priced considering this is one of the top of the accessories out there used in world level competitions and contests - High snob appeal. Using this pitcher will ensure you look like a Master/Professional Barista # Tips - When tapping (knocking the pitcher on the table), it is highly advised not to knock the pitcher while holding the handle. Do knock the pitcher while holding the top of the pitcher instead. In Amazon reviews, there is a number of cases of broken handle complains.

I am extremely impressed with this pitcher. I don't regret paying the extra bucks for this one at all. It is extremely heavy duty steel. I thought my last one was impressively thick and this one makes that one look thin and cheap. The spout is great, and I love the form of the base that makes it easy to gauge how much milk you are putting in. This is also extremely helpful for figuring out how much froth you have made and when it's time to start mixing it back in if making a latte. It is extremely easy to create the vortex. I just tilt the pitcher at a slight angle with the frothing wand at the edge and bam...vortex. The 25 oz version is easy to clean, and I have very large hands. I originally wasn't crazy about the hard angled handle and how it visually contrasts the smooth lines of the pitcher body, but it is perfect for holding it steady while trying to pour latte art. My latte art is still sad, but it is unquestionably my fault and not the pitchers. I would buy definitely buy this one again.

Great pitcher overall. Easy to use, solid heavy build, the only problem if the exterior coating/paint. After about a few months of daily use the black coating starts to peel off like vinyl paint. I’m going to have to start actively removing the paint around the mouth to make sure it doesn’t get into the milk that is being steamed. Note to self and others: the black looks nice at first but the uncoated ones may be better for the long haul. Especially considering the cost of one pitcher.

Another great product from Motta, my milk love it

There's a crevice where the handle meets the main body that easily accumulates dust, debris, moisture, etc. Very overpriced for what it is, but decent enough build quality and excellent aesthetics.

We recently got an espresso machine for our photo studio and it's been fun playing barista. The pandemic has kept us out of Starbucks over over a year now. While my latte art still has a ways to go, this has become my most used milk pitcher because its small size is perfect for steaming milk for one latte and it keeps me from wasting milk. I love the look of it, the black matte finish matches perfectly with our other coffee accessories, and the handle is very comfortable and lines up perfectly with the spout so it's well balanced. I plan to buy another one in green just because I love the looks and want a second one!

j'ai déjà acheté pas mal de pichet à lait mais celui-ci est vraiment d'une qualité supérieure, la marque étant elle-même très réputée dans le domaine du café......il est juste plus petit que ce que je pensais....mais je compte commander le 75 cl mais je garde le 50 quand même parce qu'il est vraiment top. Du matériel de qualité conçu pour durer!!

Much heavier than my La Marzocco stainless steel pitcher. I keep this in the fridge overnight and whip up an oat milk flat white each morning. The extra thermal mass gives me a bit more time with the steam to get a good micro foam. Top notch jug for milk steaming

Internals of the pitcher were in some sort of graphite/metal residue. This substance made marks like graphite pencil on my hands after 1 cycle in washing machine. Overall it still survive 2 washing machine cycles, 1 thorough wash with kitchen sponge and detergent and than - metal wool scrub. And you still see gray on a paper towel. How I supposed to clean it? Freakin sandblast it? Or use acid?

Newbie on the latte art making and this jug is amazing! The small size helps controlling the process of the latte art, and love the color.

Motta es sinónimo de calidad, así como esta jarra, ideal para un capuccino o cortado. El material es acero de grueso calibre, la pintura se ve muy resistente y duradera, hasta el momento la he usado un par de meses y sigue viéndose como nueva.