Garmin Bike Mount, Best Tek Garmin Gopro Combo Mount, Handlebar Combo Mount for NiteRider Lumina, Garmin Edge Computer and Gopro Sports Action Camera (Black 31.8mm Combo)

The media could not be loaded.  I gave it a 4 star rating because it only fits 31.8 mm handlebars. There are no shims provided for 25.4 mm handlebars, or a protective shim for 31.8 mm handlebars. I used a piece of electrical tape to protect my 31.8 mm carbon handlebars. The hinge section will scratch your handlebars as you rotate the mount to adjust it and tighten it down.It is a quality mount and very well made. There is not much vibration in the videos (see attached video). I use it with a Garmin 820 and a Sony HDR-AZ1 action cam. It does position the Garmin about 20 mm farther out than the standard Garmin mount for the 820, and about 20 mm lower if set at the same angle as the standard 820 mount. I assume this is to accommodate a variety of Garmin units and cameras. If you want your Garmin centered on your bars, it mounts to the right of the stem vs Garmin's mount to the left of the stem. I have no problem with any of these differences.

This bracket was just what I needed. It's one bracket for both Garmin and Go Pro. But, because it curves to the left,you have a couple of mounting choices. Either mount it to the right of the stem and your equipment will be close to centered. Or, do what I did. I mounted it to the left of the stem so there was room on the right side for my headlight without making any contact with my Garmin.

It is aluminum built, very well cut. Light weight and small. It fits perfectly my 1 1/8" handlebar. You can see the old setup for my go pro. Too many accessories which means too many chances of loosing the camera angle. My new setup is clean and simple. No unnecessary accessories, just one screw to deal with which means fewer chances of loosing the camera angle and missing great shots while riding. I'm loving it so far. Definitely recommended.

This thing is awesome! No more clutter ness on my bike’s handle bars! My headlight would always be in the way of my enter button of my garmin but this bad boy took care of that! The material it’s made of is super solid, I’m sure it’s gonna last me a very long time.

Reviews looked good, supposed to be a solidly built / designed aluminum mount. I used it for about 10 rides ( approx 300 miles) with a Garmin 520 and an action cam slung under on my road bike. Today it completely failed on a rough piece of road (no big pot hole, just regular NJ roads). Camera and Garmin smashed and now not working. I would not recommend anyone buy this mount unless you want to trash your kit. Not sure what they calculate the loading/ force at or stress cycles - will be asking the vendor that when I make my claim against them for some new kit.

Exactly as it’s sipposed to be. My step dad works on bikes for fun and he loved this to have as an extra piece to work with. Very durable and has a good weight to it. Very happy with this bike mount.

I liked it at first, but then one of the little screws holding the arm on fell out in the road somewhere. Now it's more or less useless.If you buy this, make sure to put some loc-tite in the screws.

Product is strong and the garmin is held tight and steady. My Garmin VIRB (gopro style) camera fit perfectly underneath and didnt move at all.

No me ha gustado nada, mejor dicho una p... Mier.... No trae goma para amortiguar el apriete del manillar, a las 10 salidas se parte por la mitad y ya te ves el garmin volando a 30 por hora

El soporte esteticamente esta muy bien, se ve rigido aunque aun no lo he puesto a prueba, lo malo es que no trae goma por lo que no se ajusta al manillar, ni siquiera llega a apretar lo mas minimo, lo he solucionado poniendole la goma del anterior soporte que tenia, pero no deja de ser una cagada bastante grande. Si teneis manillar de carbono ni se os ocurra ponerlo sin goma

No traegoma para amortiguar y no arañar el manillar.No cierra en mi manillar, dejándolo totalmente suelto, como veis en la foto no es totalmente redondo como los manillares normales total que me a durado en mi poder 15 minutos. No e sido capaz de ponerlo. Un consejo gastate un poco más y compralo de la marca Garmin. Al final lo barato sale caro.

Il braccio porta Garmin sembra di buona qualità.Purtroppo ho dovuto restituirlo perché l’attacco della fotocamera ha la parte centrale più grande e non si inserisce nell’attacco della fotocamera. Peccato....

La calidad del soporte es acorde al precio del mismo. Quiero decir con esto que la calidad es correcta. Pero esta muy lejos de la calidad de una Garmin o un K-Edge que tambien son mucho más caros.