ARCTIC Liquid Freezer III Pro 360 A-RGB (White) - AIO CPU Cooler, 3 x 120 mm Water Cooling, 38 mm Radiator, PWM Pump, VRM Fan, AMD AM5/AM4, Intel LGA1851/1700 Contact Frame - White

I recently replaced my previous AIO (MSI Mag CoreLiquid I360) with this AIO from Arctic. The MSI was slowly getting degraded from only 8 months of use. This is my first Arctic AIO and the first thing I noticed was the outstanding build quality. Installation was easy, my kit included the new MX-7 paste. My temps dropped 6c while gaming and the fans are noticeably quieter than the MSI AIO. The ARGB looks great as well!

Keeps a overclocked cou really cold, best sub 200$ cooler out as of 2026 Handles 250watt amd cpu easy, and doesn't choke with a 800 watt modded 5090 inside pc making alot of heat Fans are good too, no need to replace them, rgb is good on them but I don't personally use it, hard to sleep next to. fans are fast when there needed but quite when not. Very very thick, make sure your motherboard doesn't clip it, my friend had a clearance issue with it in his case, but it fits in mine

Lives up to the hype, and I'm glad I got the updated version. Wasn't even aware this dropped until I went hunting the previous LF3. Installation wasn't difficult. Tubing is a tad long, but that's just due to my case having the mobo mounted a little higher. It fits fine and after a little adjusting there's plenty of room. Be warned: if you use the all-in-one cable you will not be able to monitor the pump or vrm speed.. that's normal. The pump will just run at the same % as the fans, so after some curve adjustments it's nice and quiet (and cool). Being it's got updated fans, and other small improvements over the previous LF3 I'd say it's a great value. If you get the black version then even better (at the time of this review the blk version is $88..). My case is a Lian Li 507, so it's a rather compact mid-sized case, and (while snug) it fits fine. Like a glove, even. A little over a cm clearance on the front and back, but oh so clean. After getting my fan curves dialed in properly (coming from a Peerless Assassin, which is still great) it runs cool and quiet-ish, as I stated above. This will have more to do with your case and other factors. I'm sure it's louder than other AIO, but I'm happy with it. Performance is solid. Installation was easy and rather fast. The online guide is great and interactive, depending on your chosen mounting method. And aesthetically it looks great. I do love that the face plate is removable, while the magnets are strong. Not sure why the "blades" you see are static (it's more of a grille), but the VRM fan appears to be substantial and u can feel a good bit of pressure coming from it...so that seems to be very functional. I hope they release a screen that's is compatible with this at some point. Edit: swapped to the split cable and adjusted my fan settings. WAY more consistent temps now. I had an issue with spikes where it would ramp up then settle once it was cool then ramp up. I'm sure this was more to do with my curve settings, but since I did this and set the VRM and pump speeds to a static 60% it's quiet and more cool than before. I also undervolted my CPU and I cruise at a solid 41C under load.

*Update*: RGB works flawlessly GREAT product for AM4 CPU's. I have been looking to replace my aging Corsair H100i Pro AIO, which I bought in 2019, for some time now. After I read all the glowing reviews, I was really excited to get this cooler. I did not see many reviews from folks with AM4 processors, though, so I was a little bit wary, especially when the instructions said not to worry about some of the chip being visible after install! D: I need not have worried. This cooler dropped temps about ~14 degrees C across the board. Went from 80 degrees under load to 66! Idle went from 50 to 36. For reference, I have an AMD R9 5900x, one of the hotter-running AM4 chips. Also I do have PBO enabled! (check screenshot for temp/load details). As others have stated, the radiator on this unit is quite large/thick, so make sure to measure your case to make sure there is room to accommodate it. My mid-tower case is old, but quite roomy, so I luckily had no trouble fitting it in my case. It is also significantly louder than my old two-fan cooler, but its not even as loud as my GPU, so I am not particularly bothered. Others may be, though, so you may want to modify your fan speed curve. Installation was not particularly difficult, and did not take much time. I found instructions using the QR code on the box (click on the 'Manuals' tab), and they were more than adequate. They included some graphics, gifs, and videos. I have a few decades of exp building PC's, so take this with a grain of salt, but I think beginners will not have too much trouble with this install. The trickiest part was removing the standard AM4 mount brackets and installing the ones included with the cooler. I had to hold the backplate (on the back of mobo) with one hand, while I installed the brackets one screw at a time. Bit of a pain, but the results were worth it. The only (and biggest) con, is that the MX-6 thermal paste included with the cooler had the consistency of silly putty. It was basically a solid. Seeing as the 8G MX-6 tube I bought, to replace the minuscule amount that arrived with the cooler, had a more viscous consistency, I assume it was a bad batch. This delayed my build by a period of two days (while waiting for thermal paste to arrive), and is the only reason why I am giving this product 4 stars instead of 5. I have not tested ARGB functionality, since I do not have a header on my old X570 motherboard, but I have ordered a header for it, and will update this review once it arrives. In short: buy this cooler for sure. Great value for money, and incredible performance. But!! Make sure to order your own thermal paste, because they may include Playdough in the box instead of actual thermal paste D

Absolutely rocks. It helps me keep my Ryzen 9 5950X running nice and cool. I used to run pegged at 90c when playing games, but now I am running a cool 60c at 356 FPS with my RX7900 XTX. This AIO is sweet. Have this on a MSI MAG B550 Tomahawk Max teamed with Ryzen 9 5950X and RX7900XTX inside of a Corsair Frame D4000. Super air movement and running smooth and cool.

Great value, looks super cool, only real complaint is no included physical manual, but, that allows for an animated online one, which is cool. Dropped my CPU temps several degrees C from the air cooler I was using. Pretty great all around.

No es posible instalar en mi gabinete Balam Rush Tank Master 9600 TB ya que es muy grueso y provoca interferencia con los disipadores de la placa base ASUS TUF Gaming B650-PLUS por lo tanto no lo puedo usar, se debe de revisar el espacio disponible y gestionarlo antes de hacer la compra Pero sin duda es la mejor opción para un procesador potente

Seni üretenlerin eline koluna sağlık güzel soğutucum. 9800x3d kullanıyorum 2k oyun + yayın + kayıt + sayısız çalışan program vsvs %98 çalışırken 50 derece sabit üstünü görmedim. Kasamdan klima gibi odama soğuk hava geliyor abartmıyorum oyun oynarken elim terleyince fanların üstüne tutuyorum..

Good prebuilt aio cooler easy to install, has a cpu fan as well on top of the water pump revs like a v8 haha. Thermals are in the mid 50 degrees Good cooler thermal paste could have been fresher but all good Good deal

Fantastic Cooling Effects , worth buying

Ik heb alles aangesloten maar geen argb verlichting .voor jan kut gekocht. Dit is nou de elkekeer weer .