Christopher Knight Home Francie Fabric with Oak Finish Dining Chairs, 2-Pcs Set, Beige

Great chairs for the price! A few of the holes were slightly misaligned, which made assembly somewhat difficult. Overall, really happy with these gorgeous chairs!

I waited to use them for like 3 weeks before i write a review.So far so good.They are so beautiful.Very comfortable..i find myself sitting there for a while even after my food is done.My husband and i built 4 of them for like 30 min !!so easy...just follow the instructions.Do not tighten the screws until you do the 'sturdy test'. I recommend.

They wobble a little on the parquet, but not on the carpet. They are soooo beautiful and cute, and the price is just unbelievable! The quality isn’t perfect, but for this price, it’s totally worth it.

For the price, these chairs are beautiful and pretty comfortable! The only problem I had was that half of my chairs were wobbly. I tried to follow the instructions the best I could, but I couldn't fix that issue, so I just ended up putting a thin felt pad under one of the legs to stop the wobbling. The set up itself was fairly simple and instructions easy to follow. They ask that you put the screws in but not tighten them all the way because if the chair is wobbly at this point, they ask you to drop the chair from like a foot up to align all the parts? I'm not sure if that's standard practice or not since this was the first time I've built chairs. The wobbliness stops when someone sits down on the chair and pushes everything down though.

Sturdy and beautiful! Perfect for the Scandinavian design look!

I bought 2 sets (4 chairs total) and within 6 months, 2 chairs are broken/unsafe. The legs become very loose and won’t stay tight even after tightening the screws. I’ve had to re-tighten the legs every week, and it still keeps happening. This is a serious safety issue: both my friend and I fell off the chair because the legs loosened so much. For about $138 for 2 chairs, this is not cheap, but the quality is the worst I’ve experienced. I do not recommend these chairs. If you still buy them, be warned that they may become unstable quickly.

Another great product by Christopher Knight! Color and size were accurate. Comfort level is great

These are very nice chairs, in a beautiful modern style. However, mine could not be assembled without a lot of careful adjustment (i.e., woodworking). If you are skilled enough to do that, I think they are a bargain, and I'm very happy with them. Otherwise, they would not be a good buy. Except for the assembly problems, the woodworking (the part that shows!) and finish are good. There are some minor imperfections that most people will not notice or care about. The backs are not one piece, but the wood is joined beautifully. The wood is light-colored (rubber wood) and quite nice (not oak). It appears to be finished with Danish oil, which is a good finish that is always repairable. The seats are polyester and a pleasing blue color. The legs have very slick plastic pads that (hopefully) won't mar wood floors. Unfortunately, the negative reviews are right. The main problem is that most of the bolt holes were badly positioned or aimed the wrong direction. Most of the bolts would bind in the holes, or could not be fastened, so the holes needed to be enlarged or moved. Patience is required for this assembly! I bought 6 chairs, and only one of them could be assembled (barely) without some modification. One bolt hole was mispositioned by about 1/2 inch, and I had to bore another one. (I used a 10-inch round bastard file to straighten or move most of the holes, but I suggest a Forstner bit if you have to bore any overlapping new holes.) (Hint on adjusting leg length: Your floor is probably not quite flat, so there is some normal flexibility to accommodate that. However, to make adjustments I used a 2-foot straight edge in a crossed pattern to find a flat spot on the floor. If the legs are all the right length and the floor is flat, you can rotate the direction of the chair by 90 degrees and the legs will still seem the right length. If it's not the same, the floor isn't flat!) The chairs were made in Malaysia, so not in China.

Bueno, pero por el precio esperaba más calidad. La tapicería se mancha muy rápido.

The dining chairs are sturdy, have a simple yet appealing look, and I appreciate the ease of assembly. The packaging was good, and it seemed like they come in a set, although I wish there was an option to purchase just one. The price was reasonable, making it a worthwhile purchase for anyone in need of quality dining chairs."

Beautiful mid-century chairs! The wood is solid and has been beautifully sanded/finished so as to make any jointwork + seams invisible. Comfort is middling but par for the course as the design itself (low profile back and cushion) doesn't exactly lend itself toward being plush and supportive. Highly recommend these chairs for a mid-century setup, or as a grounding feature in other design styles. They add a nice earthen touch to our moody/luxe dining room.

Chair looks and feels more expensive than it is, well built and good quality! Also easy to assemble as long as you follow instructions. Just bought another set because of how much we loved out first ones!

I bought 8 chairs. All of them could not be assembled since the holes do not line up. And I am not talking ikea kind of wiggle to line up, over half the hole is covered. It cannot be assembled.