Sunnyscopa Waterslide Decal Paper for INKJET Printer - CLEAR, US LETTER SIZE 8.5"X11", 20 SHEETS, Personalized Water Slide Transfer Transparent Printable paper - DIY Custom for Tumblers, Glasses, Mug

This is my favorite waterslide paper. It's the only one I have used for years on my tumblers. Images always are vibrant and clear. Images remove from backing very easily with a few thin coats of sealer.

Very straight forward. This is a an absolutely wonderful product for those wanting to create fully colored [or black and white] decals.As with many water bath decals, this will show a slight background even being clear, so cut as close as you can to the image.I have old models that needed restoration and this paper was the ticket.The laser paper has performed solidly for me.It didn't take any soaking time at all and they go on smoothly and dry quickly.

I have ordered a few for projects and they work great by following process on packaging.

seems good so far... experimenting with printing methods etc... so far so good. Intended use is on a couple of scale models.Like any other similar, including factory -printed decals, using a decal slide medium and adhesive can really help, as well as a surface sealer afterward.

Product worked just as stated in the product. Project looked great glad I ordered it and will be using it for many other things as well.

Very high quality water slide decal paper. Will definitely buy again. Surface must be smooth and not pitted, but this product does well on my uneven surface application.Using two coats of triple thick acrylic top coat (instead of resin) seals the decal and can not even see the edges of the decal.

Used to color laser print decals for aircraft models. Outstanding results. Have had no problems. One great feature is that these decals slide off the paper backing very quickly - 15-30 seconds after wetting the decal.

What a fun item to have! I have not used this in my laser printer yet, but I made some Halloween decals of my own for my nails on the CLEAR laser printer decal waterslide paper. It worked great!This was a first try for me, so there's a learning curve. Here's how I did it, if you're interested. Hope this helps!I cut off a small piece, painted some cheerful Halloween ghosts on it, (based on something found online) with acrylic paint, and let dry. I sealed it with clear nail polish and let dry. I trimmed it closely. Next time, I will not cut between the ghosts as spacing was compromised when I applied it. This was my fault, not the paper's.I only had to put the tiny decal in water for a few seconds, then it was ready start sliding off the paper with pressure applied. If you watch the backing, you can readily see when it's all wet. Positioning carefully, slide it directly off the backing paper onto your dry prepped nail (basecoat & color) and press firmly into place. I used tweezers to assist with this. Let dry and embelish around the decal if desired (I did with dotted stars). Let dry. Topcoat with clear polish (fyi: none of my polishes are gel.)I needed to create my own because I can directly paint onto my left hand, but not my right. With my short fingernails, this lets my creativity fly!When I have time, I'll start collecting little sketches to print that could be applied with just the black line drawing, or I could print, paint, and then apply them. (My laser printer only prints in black.) This is going to be fun to use! Now I'm thinking about embellishing - even monogramming - stainless steel mugs, suitcases, candles...