Moen Home Care Bathroom Safety 36 Inch Stainless Steel Handicap Grab Bar for Bathtub and Shower, Elderly Assistance Product with Concealed Screws, 8736

Product has two flanges with multiple perforations so you can find align it with the studs in your wall. It is very important to screw both ends into wooden studs to they will support the weight if someone grabs on the rail while falling.The trickiest part is identifying where the studs are. I purchased an expensive stud finder because I have an old house built before modern framing distances were standardized. The product I used worked well, detecting the studs through the ceramic tile.If you are planning to drill holes in porcelain or ceramic, use a diamond drill bit so you don't crack the tiles. The best technique for me is to drill the hole an an angle because the bit will try and skip away from your hole marking. Once you have one edge started, straighten the drill and drill perpendicular to the wall. I had to use a narrower drill bit to hollow out the screw path because old pine is hard as nails. Not like the timber you get in lumber stores today.I put one hole in one end, they aligned the opposite end with its hole. This way I assured that both ends of the grab bar are anchored in wood.Installation was really easy and the bar looks great in my shower/tub.

High quality product and very easy to install once I located the studs. The 32 in size bridged across two of the boards spaced every 16 inches, and are a perfect size to hold onto, even with arthritis. I feel safer now coming in and out of my shower, as this bar doesn't move.

It s sturdy and very good. I did not expect to be this good because not expensive. It is a deal.

When my wife was scheduled for knee replacement surgery, I started looking into grab bars ... and finding a zillion brands, finishes, types, shapes, etc. After considering some of the fancier and FAR more expensive options, I came to my senses and focused first on specifications, namely, tubing wall thickness, welds, and attachment plates (flanges).The Moen bars are really basic, but the specs are decent, it's a brand name bar, and they were returnable if I didn't like them when they showed up. I ordered them and they are just fine.What I didn't want to do - with any brand bar - was try to blindly attach them to studs. I do a lot of home improvement work and I can pretty reliably find studs with a finder and occasionally a magnet, but I also didn't want to risk placing a critical screw too close to an edge or into a weak spot in the stud, like a loose knot, and there was no way I was going to use drywall anchors for something so critical. Finally, I found by reading descriptions and instructions that the flanges for almost all grab bars are circular. While that offer a lot of options for screw placement, their sizes are such that most will only accommodate 1 or 2 screws per plate, the other available holes not being over the stud, which wasn't comforting.So, I opened the walls, installed blocking between the studs, patched, and installed the bars with 3 heavy gauge construction screws in each flange - checking first to ensure that the flange cover would fit over the screw heads. The bars are solid as a rock. The flange welds would probably fail before the screws or blocking would. There is no wobble, no hint of movement whatsoever, no matter how much you push or pull.I'm happy. My wife is happy. They look good. Plus they eliminated a couple of extraneous towel bars and hooks as I bought 36" bars so as to serve double duty. One is always bare, the one on the opposite wall has a few items on the far end that isn't actually used for grabbing.

Does the job. Note that quality of installation is very important -- you don't want moisture getting into the wall.

This bar went up easy, is secure and strong. Stainless steel means no rust

Needed 2 of these in the bathroom. Wanted this length to mount straight in to studs. Easy install. Managed 2 screws on each end in to stud. Very secure.Brushed stainless steel, easy to clean but provides good gripping in use. Will order again when needed elsewhere.

As well as being strong, I chose it because it's long enough to use as a towel bar which most bathrooms never seem to have enough of. It's a nice diameter which works for my small lady hands- many brands make them so wide in diameter my hand can't close around. Also, I liked there's a cover for the screws- protects them from rusting.