Acoustic Panels, 2" X 12" X 12" Acoustic Foam Panels, Studio Wedge Tiles, Sound Panels wedges Soundproof Sound Insulation Absorbing

My Rating: 4.7 / 5Purchased 12 X 12 X 2 Pyramid Panel 12 pack ($20)OVERVIEW: The foam panels work great for acoustics in a room. They also reduce noise to some degree, but are not capable of soundproofing a room (not the purpose). This is an overall great buy. Highly recommend the 2 inch thickness over the 1 inch thickness.PRICE: The price to quality ratio is unbeatable compared to other amazon products. The foam is good quality, but they are not very dense because these are low tier sound panels (mid tier = $60 - 75). From what I’ve tested these are the best you can find for a 12 pack under $50.UNPACKING: The foam panels come vacuumed sealed. At first I thought them might have been defected because they were as thin a paper. Leaving them out didn’t seem to work either. I ended up running a bath and letting them soak for 30-60mins. After ringing them out they looked perfect, albeit a few spots which I have to manually pull apart. After I put them in the dryer with dryer sheets on gentle dry for 45mins. They don’t come with adhesive so I used 3M double sided foam tape (great for removing off foam and walls if you rent).CONCLUSION: I would highly recommend these foam panels to anyone looking for a budget friendly option to create better acoustics, dampen sound, or for slightly reducing outside sound.

Used it to keep out water pump quiet. Does a good job and the self sticking backing was fantastic sticks very well. Just the right size for my cover box over the pump. I did check with the well guy to make sure it wouldn’t over hear the pump. Well guy says it’s ok

Upon taking it out of the packaging it is deceiving, follow the instructions, they were 1/16 of an inch super thin/compacted, looked like poor quality.So for the producer it is completely unnecessary too vacuum seal these, you have to cut them at full density for shape. I order the 48sqft it took me 2hrs of soaking,kneading, & ringing out then put them in dryer on the fluff cycle for 2hrs before these were full size. Keep them at full size n repackage them neatly and ship in a larger box. They are 2” as described once full-size great quality! Long unnecessary process but happy end result. Recommend buy the adhesive tabs to secure

Awesome product works better than i thought it might. I built a shop vac cabinet for my CNC routers, to try to quiet down the sound of the shop vac; nothing is more annoying than the sound of a vacuum cleaner running the whole time your routers are running lol. Figuring the sound would really echo inside of the cabinet and turn it into a speaker so i bought these in anticipation of that. Sure enough once i had it done i was getting >85 dB, but once I lined the inside of the cabinet with the panels the sound dropped to >60 which is hardly noticeable over the rest of the tools. I do wish the adhesive was a bit stronger, but once you have pressed it firmly into place (maybe roll it out) i think it will be fine. I'll be buying more for sure

I essentially bought several different types/brands of acoustic foam panels because I was worried about different in quality and delivery. I bought1. "3 of New Level 6 Pack- Acoustic Panels Studio Foam Egg Crate 2" X 12" X 12"2. "12 Pack Set Acoustic Foam Panels, Studio Wedge Tiles, 2" X 12" X 12" Acoustic Foam Sound Absorption Pyramid Studio Treatment Wall Panels"3. "12 Pack Set Acoustic Panels, 2" X 12" X 12" Acoustic Foam Panels, Studio Wedge Tiles, Sound Panels wedges Soundproof Sound Insulation Absorbing"The first is from "Urban Mall", and the other two are from "F.Stop Labs". This review is comparing item #2 with item #1.First, both #2 and #3 arrived together, in a single box, compressed into individual 12-pack bags as can be seen in the first picture that compares the foam panel with a bag next to it. That panel in the first picture is a panel that was taken out of the bag, aired for Sunday, Monday, and Tuesday (72 hours). After 3 days the foam was all compressed, and looked really bad. It did not uncompress at all. That was the first method the seller recommended to use. Then I soaked the panel in water, squeezed the water out, and let it air dry over night. The next morning it was still damp, but the overall shape was better.The second picture compares a panel that was uncompressed for 3 days (on the right) with a panel that was left wet and then air dried (on the right).I would not recommend you to get #2 or #3 because you will have to wet each panel, squeeze it, and then find space to let it dry - that will take quite a large space. So that is one reason why not to get it.Second reason why not to get these panels is because of the quality. As you can see in the last picture, the panels arrive wrinkled, and have additional damage cuts on the back side.Third reason why not to get these is because of the product specification is not matching what you will get. I ordered the 2 inch thickness foam panels. Letting the panel air decompress will bring it to about 1.5" at best. Wetting the panels and then drying them will generate a better shape, but will still give you panels with thickness of 0.75" at the lower end, and 1.75" at the higher side. Not even close to the 2.0" that was ordered.

Buy about 25% more than you’ll need, because you’ll be throwing away about a quarter of them due to poor quality control and inconsistent cutting of the foam.

Son uses when he games we can barely hear him.

Pas encore installer mais mousse de qualité très content!

these are good quality foam panels. don't worry about expanding them its easy to do, just soak them in water then put them in the dryer for 20-25 minutes.

Es un producto que en general es de buena calidad. Te ayuda lo suficiente para poder percibir una mejora en acustica de grabacion y reproducción, obiamente si quieres mejorarla a una calidad mejor hay otras opciones, de lo contrario si no se tiene el presupuesto suficiente para invertir en mejoras de acusta en una habitacion esto es una manera facil y barata. Lo recomiendo 100%.

I read the other reviews and so I was sure to soak these for 10 minutes and then put them in the dryer for 20 like it says on the instructions. They all inflated perfectly. If you find one isn't puffing up when you wring them out, just toss it back in the water for a few more minutes.I made some decorative soundproofing panels with these!Really happy with the value, I'm buying 2 more packs to make some more panels