Window Privacy Film Frosted Glass Static Clings, Decorative Bathroom Door Privacy Film Day and Night, Heat UV Blocking Anti-Glare Frosting Stickers Renter Non-Adhesive, 17.5 x 78.7 Inch, Pure

We have clear partitions in my office. I end up making eye contact with EVERY person who walks by, and I am easily distracted. This gives some privacy, while sill allowing light to pass through. I use it to manage my ADD and keep myself focused on my work. It's a cheap fix and a good product. The installation was straight forward. Just take your time working out all of the bubbles. You can trim the excess with a knife / scissors later (the next day), after it dries.

The film looks exactly as shown. Good color and opacity. Lots of light coming in, but unable to see through it. Installation took 15 minutes and no issues with adhesion yet. Looks great! 👍🏻

I have applied my share of window films and due to issues experienced with most, wasn’t looking forward to applying this one on a glass exterior door. Surprise, surprise, after throughly dousing the window and the film, I applied it starting at the top and worked out the bubbles as I moved down. No issues, easy to apply and the bubbles came out very easily with a plastic baking tool that looks like a scraper. Trimming it was very easy using a broad bladed scraper held against the inside edge and cutting with a utility knife with a new blade. I applied a frosted film to the window and it now has a classy look. As long as the film doesn’t dry and begin peeling off, I’ll be a happy camper. I like how it subdues the glare on the floor from the sun yet allows plenty of light into the hallway. The last photo I took reveals that at the top, it may be coming lose as it dries. I may contact customer service to get their take on what could be done. I had to deduct 1 star due to this.

I used the Coavas Window Privacy Film for my bathroom window, and I’m really happy with how it turned out. It gives the glass a nice frosted look that still lets in plenty of light while keeping the space private. The best part was how easy it was to apply no glue, just a little water and it sticks right on. I was able to adjust it a few times without any mess. It also helps cut down on glare and heat during the day. Overall, it makes my bathroom feel brighter, cozier, and a bit more stylish. Definitely worth it!

Does a very good job letting light in without people seeing you. Used frosted in 2 bathrooms and the film was of a nice weight (does not tear). It was easy to install and has stayed tightly adhered to the window. With blinds it is impossible to even see your shadow. INSTALLATION TIP: After cutting it to a little larger than the glass we were adhering it to, I put frosted side on the flat wall. (after rubbing it to make it flat, it stuck using static cling). Then we peeled off the film. While still clinging to the wall, I used a rag and dipped it into a cereal bowl with a mixture of warm water and some dish detergent. Then, wetted the window and privacy film. It should be almost dripping wet. Then pulled the film off the wall and put it on the window. If you line up 2 sides it is easier. You'll only have to trim the other 2 sides. If someone can help you it will be easier also since the film tends to slide when cutting to size. Use a very sharp razor blade!

I purchased several rolls of this in the opacity called Pure. A few factors drove my purchasing decision: THE ABILITY TO GET IT QUICKLY, attractiveness, opacity (I wanted maximum light transfer), and ease of installation. This wasn't the quickest of deliveries, but I didn't have to wait awfully long for it, so that part of the transaction was acceptable. Unfortunately, when it did arrive as two separate orders, one of the rolls delivered to me was white instead of Pure. Irritated as all get out by this for reasons I'll explain in a minute, I referred back to my order, and whoever packed my orders just flat out sent the wrong item in white instead of the correct one in Pure. This is *really bad* because now, my windows now don't match, which just looks like a trashy after thought - and that's an aesthetic that I wasn't going for, so I'm definitely not pleased with that. I would have gone through the insanely inconvenient hassle that is a return on Amazon, except that my #1 reason for ordering this was that the delivery was quick. This was purchased to accommodate a foster dog with reactivity issues who was having a rough time with visuals outside of our house: I needed something fast for his needs, and something matching, with acceptable opacity and light transfer for mine. I was flat out stuck with what was sent to me, as by its delivery time, there just wasn't the luxury or time for a return. I'm still salty about it. To make things worse, the roll of white arrived with creases that penetrated the entire roll, which presents adhesion issues during install and gives you areas afterwards where the film doesn't cling (also displeased with that). Rolls that aren't perfect shouldn't ever leave the factory OR a third-party shipper due to the nature of the product. Lastly, none of my rolls are the lengths stated in the item's description. I measured all of my windows in advance and should have had enough left over for a few more small windows if I needed it; instead, I'm significantly short. All of these things combined means that I now have a large window that had to be "patched", and since my films don't match, it looks like a hot mess. If I'd have received everything in Pure as I'd ordered, this wouldn't be noticeable to anyone but me, but with all the mistakes combined, it makes me bitter every time I look at it. (Patchy windows look bad from both inside and out!) On the positive side, it does cling very nicely. If an area pulls away, just mist the area and squeegee again to remove bubbles. I suggest using a straight edge/T-square and razor blade knife for cutting crisp edges. Have a large area for triple checking your measurements and cutting. The protective film backing sticks a little too well, so be prepared to wrestle with it and become frustrated. You'll get it off eventually, but that was the worst part of putting it up. It repositions easily, so lining up edges and corners isn't a big deal if you find it's going crooked. Large windows require two people or the weight of the film will pull it down if you're trying to put it up alone. While I'm not big on having my windows covered, it's been a really handy solution for my purpose and it would be nice after investing the time to size and cut it all to be able to re-use it in the future, though I have no idea how you'd store it. I do like the way the Pure looks, but would only order again if I could be certain that I'd get the correct product in the actual length stated (this is too expensive to not get exactly what you've paid for!)

So far it’s exactly what I need, looks great. Looking at reviews it’s supposed to hold up very well, but only time will tell. My porch is ground floor so I wanted privacy while also being able to get natural light and this solved my problem instantly. It’s a cost and time efficient solution. I used 5 of the smaller roles and it was exactly the size I needed for my large porch doors. I used a spray bottle and sprayed a bunch of water on both the window and sheet, then placed it where I wanted it and used a scraper to smooth it down, it adhered perfectly. Then I used a blade to cut off the excess. I also placed a towel on the floor to soak any water, but it wasn’t as messy as I expected it to be.

I had to do something to get some privacy with 18 individual window panes on an exterior door. But I didn’t want to lose the light, as those windows are the only ones on that side of the room. After reading reviews here, I chose the white film. I made a template of the window size with paper and traced it onto the back of the film, then cut. When cutting, I tried to get as close to the actual dimension of the window rather than leaving much extra because I find it kind of hard to trim it on the window after applying it. I cleaned each window with rubbing alcohol. Then I did the *hardest* part - getting the backing off the film. Took forever!! Finally figured out that it was a bit easier if I kind of roughed up an edge by scratching my fingernail along it. I had bought a small supply kit for applying the film, and it turned out to be invaluable. It came with a small spray bottle, a plastic scraper, and a small squeegee. In the spray bottle, I put water, some white vinegar, and a squeeze of dish soap. I applied that liberally to the window before applying the film. I directed the spray specifically at the top edges of the window, the top corners, and the side edges, then some sprays in the middle. Applying the film was easy. The scraper from my kit did a great job. The squeegee was surprisingly helpful on some bubbles that the scraper didn’t get. Sometimes I needed to switch up the tools on the same spot, just rotate through them. I was able to get all the bubbles out, or nearly all. I tested the windows out for privacy at night and the white film is great. Can’t see inside the room. I applied it at night so I haven’t seen the daylight effect, but I did see how much interior light was visible outside when I was testing for privacy. It showed a nice glow, so I think the sunlight will come through nicely. I’m not handy, but I was able to do this. If you get your tools together, measure carefully, use water/vinegar/dishsoap liberally, have a couple different scraper/squeegee things for getting out the bubbles, and have a little patience, you can do this! 4 stars because I don’t know about longevity, but I’m thrilled with how it turned out on Day 1.