Musiclily Pro 11 Hole HH Strat Pickguard Humbucker Guitar Scratch Plate for USA/Mexican Made Fender Standard Stratocaster Modern Style, 3Ply Cream

First and foremost, depending on the type of Strat you own, this pickguard may need some modification work in order to fit, especially if you're converting from a different pickup combination (whether SSS, HSS, etc.). There's just no getting around it. If you're not competent with tools or minor DIY work, you may want to have a skilled luthier or an experienced wood worker do the work for you. Some fenders will also need the body cavity routed out in order to accommodate 2 humbucker pickups, especially if you're converting a single-coil 3-pickup Strat (SSS) to dual humbucker (HH). If your Strat needs body cavity modification and routing, that will definitely involve more labor and skill. I purchased the black pearl colored 4-ply pickguard for an Indio HSS Strat...wanted to convert it from HSS to HH. Indio guitars are more or less Fender Squier clones (they're not an exact match but very close), and IMO are better quality than some Fender Squier models. Additionally, Indio guitars have plenty of room in the cavity underneath the pickguard for easily installing HH pickups near the bridge and neck (see photo) without the need to do any additional routing work. The pickguard is well-made, sturdy, and easily modified if you have a Dremel or small routing tool. For my particular (formerly HSS config) Indio Strat, I had to use a Dremel w/sanding bit to thin out area of the pickguard that butts up against the trem block (bridge), as well as removing some material from the rear of the pickguard that snugs up underneath the neck. As you can see in the photo, it's far from a perfect job, but looks cosmetically acceptable now that there is clearance around the trem block. You should be able to see the material I've removed if you compare my photo to the stock pickguard w/no modifications. Only a couple of the screw holes on the pickguard lined up - just lock those 2 holes down and use a small drill bit to drill pilot holes using the pickguard as your guide. It's very easy and took under 20 minutes to fully modify. Overall the pickguard looks great, and I like the black pearl look compared to the plain colors. Goes well with the royal blue color of the guitar. The back side of the pickguard has plenty of shielding on it to minimize interference. Great price and I highly recommend for anyone looking to convert their Strat to dual humbucker or replace an existing HH pickguard.

Musiclily had quality product's.This looks great.

Worked great for a pickup swap on a MIM Fender Player ii.

Nice that you can get a really nice pickguard for your axe for a fraction of what other sites charge, like Greasy Groove, etc. Good quality; not really sure how they sell them so cheap, but I"m glad they do! Would do business with this vendor again, for sure.

2 years in with active EMGs on a MIM Stratocaster and still holding strong. Same quality as oem, but at a fraction of the cost. Everything lined up perfect. A no brainer for your strat.

I ordered the American/Mexican Fender Standard Stratocaster Modern Style, 4Ply Parchment Pearl pick guard with a H-H configuration. The pick guard appearance was great! Very solid product. I have ordered from them before with great success. This time, however, the pick guard needed to be trimmed in the neck pocket area as it overhung the pocket opening and wouldn't allow good placement of the neck. I had to manually trim it with my dremel tool which was a pain and of course does not have perfect edges around the neck pocket. The holes all lined up fine as did the bridge cutout so its just a problem with the neck pocket cutout.

I have built a dozen or more Strat-style guitars with the standard three single-coil pickups. For something new, I decided to build one with two humbuckers. This Musiclily HH pickguard was just the ticket. Well, almost. My parts box had two MINI humbuckers. This led to some "interesting" engineering challenges involving this pickguard and mini-humbucker adapters. I met the challenge and the resulting pickguard looked (and worked) great on the all-black body. The pickguard itself was well-made and the mounting and control holes were all located properly.

Perfect fit.