Cerma Pick-up Truck Diesel Engine and Manual Transmission Treatment Package Kit 10-w-30-w 30,000 Mile Oil

Description

Cerma Value Package for Diesel Pick-Up Truck Save money by purchasing Engine Treatment and Motor Oil in a "Value Package" (available for a limited time). Big savings from purchasing items individually. Diesel Engine Value Package for Pick-Up Trucks is our best value to bring engine to peak operating levels, and includes: Comes with One (1) Cerma STM-3 6-oz Engine Treatment Twelve (12) Quarts of CERMAX Synthetic 30,000 Motor Oil One (1) 2oz- Bottle of Manuel Transmission Treatment I) The Cerma Protocol: 1. Use treatment first! Add treatment to existing oil (not Cerma Oil) 2. If your engine has less than 30,000 miles, add only 3oz of the Engine Treatment to your existing engine oil. If 30,000 plus miles then add full 6 oz. bottles. To add to the engine oil, best method is to add when engine is warm and while it is running at idle. If blow back is present, shut off engine, add treatment to oil and start engine immediately. After adding, do not shut off vehicle. Idle at 2000 rpms for 2 to 3 minutes and then drive car for a minimum of 15 to 20 minutes. It is preferred to drive in city stop and go traffic for the first 10 minutes, then freeway or high speed driving for 10 minutes. Cerma uses all rpm ranges to provide proper distribution of the technology. 3. Put a minimum of 3,000 miles after adding engine treatment and before oil change interval (next step). 4. Change oil using CERMAX Motor Oil. (Do not utilize any other additives while using Cerma branded Oils) 5. Your part of the process is now complete. Over the next 90 days of driving, the Cerma process will complete its process on its own.