HumanCentric Mounting Bracket Compatible with Intel NUC, VESA Monitor Arm Extension Plate for NUC Mini PC Computer, 75x75mm and 100x100mm Patterns, Does not fit Hades and Skull Canyon NUC

I bought this HumanCentric VESA bracket to mount a Beelink mini PC behind my monitor arm (100x100 pattern), and it's been a clean, space-saving solution. Note: it's marketed for Intel NUC models, but it worked fine for my Beelink—the Beelink comes with its own small metal mounting bar/adapter that screws into the bottom of the unit, providing standard VESA holes that line up perfectly with this bracket's adjustable slots. Installation was straightforward: attached the Beelink's adapter bar first, then secured the mini PC to the bracket with the included screws (plenty of slot options for alignment). Mounted the whole thing to my monitor arm, and it's rock-solid—no wobble or sagging. Pro tip from my setup: I oriented it vertically (upwards position) instead of horizontally/sideways. This keeps the rear ports (power, HDMI, etc.) facing up, which prevents dust from settling in them—especially useful in a dusty home office environment. Build quality is good—sturdy metal plate with a matte black finish that blends in behind the monitor. It's kept my desk clutter-free and the PC out of sight. If you have a non-NUC mini PC like a Beelink that includes a VESA adapter, this bracket is a solid, affordable option for a hidden mount. Just double-check your model's hole patterns/adapter. Overall, very happy with how clean and functional it turned out!

Works well with my 32-in Dell monitor. My Geekom A8 fits well and is secure. You do have to make sure you have the adapter that came with the A8.

I'm using this for a RaspberryPi that has a VESA bracket on it. It looks like it's going to do what I need it to do - mount a RaspberryPi to the back of a monitor. The bracket is sturdy, well-made, and nicely finished. At first glance it looked like the hardware was improperly sized - screws that are too long for the included stand-offs. On second look it appears this was intentional as the screws have to pass through both this bracket and the VESA wall mount bracket. Good thinking! (better than my first guess anyway :) )

Mount works great, use the extended mounts for the screws for additional air flow to mini pc.

The build quality and ease of use is great. I just wish that there is a way to install the Mac mini in a reverse orientation.

I used this bracket to mount my Beelink S12 mini pc to the back of 27" widescreen monitor. The bracket provided numerous mounting positions, one of which was in a vertical position providing access to the on/off switch on the pc. There was provided a number of mounting screws, however, I had to obtain a couple of screws and nuts to finish the mounting. I was very happy with the end result.

This mount is a brute, I had no idea it would be built this strong. I could hang100 mini pc's from this thing.

It was all there and as advertised, with all the mounting brackets and everything. Screws and such. I don't have monitors to mount them to yet, so I can't tell you much else about them. But I am pleased with what I do have.

J'ai acheté ce support pour accrocher mon petit MinisForum, afin de libérer de la place dans le bureau. Il est accroché entre un écran LG UltraGear de 27 pouces, et un bras double Ergotron. Ce dernier ne pas pas simplifié la tâche d'installation, car il bouge facilement tant que l'écran n'est pas installé, mais j'ai réussi à bien l'accrocher quand même. Comme montré dans les photos, le tout reste bien dans le périmètre de l'écran. Je viens de déménager, et donc j'ai encore un peu de gestion de câbles à faire, mais le produit fait clairement l'affaire. Il a également l'air solide. 100% satisfait !

Sehr solide Ausführung. Passt natürlich nicht nur für Intel NUCs, sondern auch für die meisten anderen Mini-PCs. Bei mir etwa hängt ein Acer Revo RB102 dran. Schrauben und Abstandhalter (jeweils 4×) werden mitgeliefert.

I didn't know if will work with minis-forum um690. But apparently it's perfect. I mounted "on top" , because the arm motor I have is a bit different. Ergotron HX. It's a big arm, and if I would put the adapter as intended , on horizontal position , I would have lost access to one side of the mini pc, with usb C ports. In one of the photos you can "see" when I hold the mini pc close to the arm. I intend to buy one more, because I want to mount also a Mac mini probably on the bottom side, I'll update the review after I'll do it. Great product, recommend for whoever needs something like that. Last photo is the view from the front of the monitor, you barely see it.When you stand up.

Used this vesa bracket on my 27inch monitor to gain eassy access from the side of the monitor to the power button on my mini pc nuc, the offset made cable management look professional. Great build quality from a reputable brand.

Works as designed for the Intel NUC. Solid build and rigid steel.