POWERTEC 3 Inch Fixed Caster Wheels with 640 lbs Loads, Heavy Duty Plate Casters, Rigid Fixed Rubber Castor Wheels for Furniture, Cart, Dolly and Workbenches (17207)

used these for a bit of an off the wall use. mounted each pair to a board and use them as roller wheel stands so that i can spin around a tank while I was paining it. roll very easy even under load, they did not lock up, and were extremely sturdy. would buy again if needed.

I modified these to fit on sides of vice table. Now I can tip it sideways onto wheels and drag out of shop when more room is needed. They work great! They roll smoothly and they are strong! Heavy vice on Steel 4 leg table, was very cumbersome before adding wheels. (Only needed 2 for this)

I’m on my second or third year using multiple wheels to rotate my diy compost tumbler and diy sand tumbler. Semi shaded space is helping its longevity, in producing usable compost and sifted sand for pavers and other backyard projects. Still gliding smooth. Would highly recommend these.

These are among the few caster wheels with the bolt pattern that fits (as a much more affordable option) The Yamaha dxs18xlf and similar subs! (Very odd / uncommon pattern of 40mm x 82mm m6 bolts (the holes on these is an m8) They don’t have bearings in the wheels (just a steel bushing riding on the plastic hub of the roller blade type wheels - which with a light grease will last forever in this application) and have some side play slop (easily snugged up with some plastic washers from ace). They roll smooth … got 2 sets of 4 for 1/2 the price of one of the Yamaha branded sets.

I built a kayak launch and used these for the wheels. It works perfectly and these castors are very smooth. Highly recommend.

Extremely sturdy. I used these to make a rolling platform for a very (very) cheap cube storage unit that I wanted to be able to slide beside my computer recliner, but then easily pull out when I needed to access the storage cubes, or clean. Because the storage unit was so thin and flimsy, I mounted them to some 3/4" (21/32") plywood with some 1 1/2" edges to keep it from shifting. Although, once it is loaded, I doubt if it would have moved off wheeled platform. Since the application would denote the fastener, these do not come with any screws or bolts. I used some some 3/4" wide wafer head screws I had laying around from another project. However, the base plate is so sturdy, I would not hesitate to use them in an installation that required them to be fastened with bolts.

excellent casters for the price, did everything that I expected, the lock works as well as it should.

Would buy again.

On the box is written that it contains material that cause cancer and reproductive harm. I intended to us it in the kids room!!!! I am returning it. Moreover there are no bolts or screws.

nice quiet rollers

They work good and price is good but only issue i have is they don't have ball bearings just a solid shaft.

I bought this specific set because the height is shown to be 4 1/8”. Sadly, that’s not accurate. The height of these is actually 3 7/8”. Otherwise, they are as described, and I like the coated wheels.