Transparent Doll Stands 10pcs Display Stand Support Holder for Doll

Best stands ever. Perfect for my Monster High dolls. No balance issues and doesn't overwhelm the display. 10/10 will be buying again

Very nice doll stands for display. Not the most sturdiest stands ever but they are holding up pretty well with my 11 inch regular size and curvy size fashion dolls. Comes in 3 pieces that you put together very easily. The piece that goes around the dolls waist seems a little fragile so take care not to bend too much when putting on your dolls. The waist piece fits my regular size doll around the waist no problem but with my curvy doll I had to push that piece lower on the stand (pole) to fit around her thigh as shown in the pics. But once on the stands, there was no tipping over or anything and looks very nice. I think it's good value for the money and would purchase again.

It comes in three pieces for each stand and snaps together pretty easy. While the stand base and stick are very sturdy together, the clip thing can be adjusted to height but it’s a little awkward to slide. The clip also can’t open or close to adjust to a doll’s thickness (I had to angle Clawd in the first picture to the side to hold him up because of this). On the base there’s a couple tiny snap bits but I’m not sure what they’re supposed to snap to. My biggest concern is that it’s really lightweight plastic so it has some difficulty holding up anything that’s a little heavy without tipping over (as is the case with Abbey in the second photo. Also, the clip BARELY is tall enough on the stick to hold her because of how tall she is). It can also be a little tricky to adjust the doll clothes around the clip and stand as well. All that said, it still does exactly what I wanted! I don’t have other dolls to test it on, but I saw how perfect it is for other Monster High dolls and is pretty much exactly as I expected. I also appreciate that it’s clear so it doesn’t stand out that much. I think it’s perfectly made for the majority of the MH dolls like Lagoona in the last picture. And you really can’t beat the price. I’ll probably buy more if my collection grows!

Sturdy. I bought them for Licca dolls and because the c clip that attaches to the doll can be moved up and down they worked perfectly for Licca sized dolls. The c clip isn’t hinged though but attaches well anyway at waist height.

I bought these to display "Skinny Ken" and BTS dolls. These male dolls are as tall as Ken, but much thinner-- almost as thin as Barbie. This meant I needed a stand that was tall enough for 90s Ken but secure enough for 90s Barbie. These stands worked! The stands hold my dolls solidly and don't wobble (I shook the table and the dolls remained standing.) The base is a bit lightweight, but broad enough to keep everyone standing upright (even on one leg or with both legs off the ground in a jumping pose.) Assembly was straightforward and took me under 60 seconds (I snapped the shaft to the stand, then slide on the waist-grip.) The waist-grip can be adjusted by sliding it higher or lower depending on how tall my doll was (BTS and skinny Ken are both 11 inches. Skinny Ken is ~11-11.75.) The slider can be adusted up or down without disassembling the stand, but the slider cannot be loosened or made tighter (it's for dolls with a waist circumference similar to ~3.75 inches/9.5 cm. Anything thicker than skinny Ken or BTS won't fit.) The color is not 100% transparent, but a milky opaque color (as much as I like 100% transparent plastic, it shows dirt, scratches, and yellowing more obviously than opaque plastic does.) The waist-grip does NOT fit over the Skinny Ken and BTS dolls' clothes-- but grips are supposed to go UNDER the clothes! Putting grips on clothes DESTROYS DOLL CLOTHES (except for collector-grade grips such as the one on Obitsu stands, which cost three times as much as these ones did. Besides, most collectors I've seen hide stands UNDER clothes to show off the clothes and make the display look more natural.) Therefore, I removed my doll's shirt, snapped the grip onto its waist, and then put the shirt back on over the stand. To my delight, the grip didn't show through my doll's thin t-shirt, so the display looks natural. The grip is stronger than it looks: I posed my dolls repeatedly without removing them from the stand-- and without them falling off. I'd love it if they released a version of this stand with a joint to adjust the doll forwards/backwards/side-to-side (this one only goes up or down.) Despite this limitation, I could still make my dolls slouch forward slightly in a surprisingly natural mid-walk pose. I could pose my dolls without removing them from the stands, and without them falling off the stand (the grip is stronger than it looks.) I posed them with both legs off the ground, walking. Overall, these stands are better than I thought they would be. They are sturdy, easy to assemble, and are a budget alternative to the pricier Obitsu stands. These work well for BTS and Skinny Ken, and will probably fix Bratz Boyz. It will NOT fit the original Ken dolls, so it also will not fit Sideshow Collectibles (much less Hot Toys), Customhouse Ange Ai or Volks YoSD. It might fit other skinny BJDs or action figures with measurements similar to skinny Ken or original Barbie.

I bought these for a few Monster High Dolls/Ever After High Dolls I wanted to display! This advertised an example of a MH doll when I bought them. These were super cheap and seemed super great! Bad Findings: The stand’s base, or bottom piece, took up a bit more space than I expected. Secondly, The “stump” that connects the base and stick make it hard for dolls to stand up straight. A few dolls I have on these stands are a bit slanted so their shoes don’t get caught and bent on this “stump”. Thirdly, One stand stick already has started slanting backwards due to the doll needing to be slanted. Good Findings: On a good note, these stands can hold both female and a certain few male (MH Male dolls tested) dolls as well! As well, a good choice if you are trying to budget as a doll collector until a better option(colored, no “stump”, or extendable) is available! Conclusion: I believe these would be more useful for sellers of any dolls(with a fitting waist range) to show off the doll than for a display piece. A display piece should be able to spare as much room as possible to fit what they can on to a shelf, or to display in a proper standing position.

love!! they fit G1 and G3 Monster High, as well as Mirror Mi🤗

Great deal for a 10 pack of stands, they fit monster high well. Super easy to put together, pretty durable, and adjustable height.

It's very effective for my dolls. However, dolls with a larger body type do not fit the doll's waist. Overall, it's alright.

Me agradaron mucho los soportes, había comprado antes para las muñecas de mi hermana y mamá, pero he pedido mas nuevamente pero ahora para mis figuras de acción. Muchas gracias.

Very sturdy and serves as a good doll stand

They’re fine. I use them for the g3 monster high dolls. Not great, kinda weak, a couple snapped on dolls like abby and draculaura who have bigger waists, but i managed to keep them on eventually. They’re a bit short too, abby is a tall doll and I had to have her knees bent a little to fit. They’re a good enough cheap option for doll stands.

use for dolls