GPMTER Bike Brakes Pads Set, V Brake for Cruiser MTB Mountain Bicycle | 2 Pairs 70mm Universal V-Brake Blocks with Hex Nut and Shims, No Noise No Skid components & parts

Great pads. Fits my 22”&26” bikes. And works fine

Great value for decent v break pads for mountain bikes.easy to install, love that it came with an Allen hex key. Not much else needed to say

These are a good option if you are on a very tight budget, but for only a couple of dollars more there is at least one other pair that works better. To be clear, these work fine - they stop adequately on my very low-powered e-bike (250W motor), I do feel they are a little soft and I wind-up squeezing harder. I'm comparing this to an identical bike that I have the other set of overnight/one-day brakes. I feel there is about a foot difference when coming to a stop traveling at ~12 mph to the other pair. (I tend not to ride much faster than that because of traffic considerations.) If you tend to ride faster than that or up/down hills, I recommend upgrading. Here are my main gripes - the angled grooves ("water guide") on it make it hard to ascertain wear without pulling the brake away. The same grooves don't help any better with removing water than straight up/down cuts. The material is a bit softer, which probably makes them silent but does require squeezing harder to stop. (I guess you don't have to worry about toe angle with these...) The included 5mm Allen wrench is adequate for changing these brakes, but I'd avoid using it on other bolts because it is a bit sharper than sets you normally buy and will mar the bolt. (If I'm not in a rush, I reach for my Allen wrenches with ball ends to better maintain the bolts.) Overall these are good, but you may want to spend a little more for the better. They are great for most casual riders, but if you commute and these are part of your daily ride - I'd urge you to upgrade.

Universal brake pads fit properly and stop well.

Never replaced brakes in my 66 yrs. Had a bike that just wouldn't stop properly. Bought brakes and installed, bike stops like it's supposed to. Had another bike that sat for a long period and brake pads disintegrated, bought a 2nd set and replaced them too

Excellent condtion with resonable prices.

So save all of the cups and cones from your original pads when you install. When I went to install these by the time I stacked up all of the little washers, cones and cups that are necessary to align the pads there was not enough bolt left to tighten the nut, almost stripped it. I took a close look and realized that each little component was built just a tiny bit thicker than the original ones. When you add it all up it didn’t work. So I used all of the old washers, cones and cups and completed the install with no other problems. The brake pads are quiet and seem to work well. I think they are quieter because the rubber compound is softer than original so they may not last as long. We will see.

Great pads well made. Perfect replacement for hybrid bike.

Good price good fit, good design