Larue Tactical IndexClips, 72 Piece Set

I purchased these for a few reasons, and was a little apprehensive based on some of the negative reviews about them being difficult to put on the picatinny rails. I found them to actually be quite easy to install by putting them on one side of the rail, and then push them over and onto the other side with my thumb. They may or may not make a clicking sound indicating they are mounted properly, but you will feel them seat properly if you do it right. I also found that using a standard bottle opener on most knives these days will easily disconnect the clips. The nicest part is the several clips that have the wire connector, and the hold down connector on the clips to help with remote switches for lasers and flashlights you might mount on the rails. This is definitely worth the minor expense, and makes the rails look good while preventing you from rubbing your hands raw from handling the weapon by the rails. Very nice, very low economical. The only issue I had, was I had too many of the clips for my weapon, so I gave the remainder to a friend for his weapon - paying it forward to another is never a bad thing, right? Cheers!

Picatinny rails have sprouted on all sorts of things. Rifles, pistols, staplers, coffee cups. You know the drill. Anyway, while the rails are great for hanging all sorts of equipment on your gear, I call the rails DNA scrapers. And, most of the time most of the DNA being scraped off is mine.So I like to put IndexClips on the rails to keep my DNA where it belongs, on me.I recommend using a non-marring tool to put the clips on and take them off, although whatever works is a right answer too. The instructions are clear and concise so if you follow the instructions you won't have any issues. Probably.Do these things hang onto the rails? Heck yeah! They're great. I haven't had one unexpectedly pop off yet. YMMV, however. I really think how well these perform has a lot to do with how well the rail and the clips fit.

The media could not be loaded.  My interests in this review are with the customer. It can sometimes be frustrating to find a product that is sold as advertised. The LaRue Tactical clips did not disappoint! They are a great value for money. I bought them because I wanted coverage for my rails when accessories were attached. Many 1-piece rail covers do not make this possible. Some covers with metal will also scratch your rail system. LaRue is a fantastic choice.Below are my observations:They do not scratch the finish on your rails and fit very snuggly (durability, sturdiness)They can be removed easily with a pair of scissors (rest closed scissor blades on opposing rail with scissor tip slightly underneath the clip you're removing and apply slight pressure upwards until the clip pops out of place. Too much scissor under the clip = possibly scratching your rail. And too little = a small smudge on the clip. You'll figure out the right amount of scissor to use quickly and can also use an Allen wrench)You only need to remove a few of them to install an accessory unlike many 1-piece protective rail coversDon't let pictures fool you. The plastic does not feel rough or scratchy on your hand. They're spaced perfectly to be gripped well.They do a superb job at protecting and guiding wires (see pics)They are much darker in real life and do not reflect light the way my pictures seem to show.Hope this helps!

I got these for my new AR and although i was slightly skeptical when I ordered them they are much better than I expected. Although looking at them it would seem at first that they can just be fitted into the rail slots and pushed on it is not that easy. I used a small hammer to tap them into place after I got them situated. They don’t come off easily either, I put a couple on wrong and had to use a flat-tip screwdriver to pop them off. They provide a pretty good non-slip gripping surface and are much more comfortable than an uncovered rail. I only had one clip break while I was installing them and that is because I applied a little too much uneven torque to it while trying to remove it.I have to say that I am pretty impressed with the clip system as it is much more versatile than other rail covers as you can cover as much of or as little of the rail as you want while being able to leave uncovered space for mounting accessories. If you are looking for a versatile, convenient method of covering the rail system on any picatinny rail equipped weapon you cannot go far wrong using these clips. They are priced right and easy to use and adjust to whatever need you have for them. I highly recommend these clips.

I've completed most of my planned rifle builds recently and wanted to cover the sections of rail I won't be using. I've played the game of buying long panels and cutting them to size, that can be hit or miss. These provided a nice option for smaller sections of rail.As of now I have used them on an AR-10 style of rifle. I have used them to cover unused rail sections, but also for indexing optics. I have a QD scope for the rifle, and use these clips to mark off where the scope is supposed to sit. I can quickly attached the scope without having to count rungs on the rail to ensure I have it in the right place. They add a bit of comfort as well, as the edges on some picatinny rails could be used to saw wood. I will say they are not the most visually appealing thing I've seen on a rifle, but I didn't build it to win beauty contests and they fit the purpose I intended for them.It also comes with a few clips that have hooks on them for wire management. I don't actively use anything with wires, but I have an old light and tried them out on it, they worked well. They grab the wire tightly and allow you to route it in any way you want.All in all it was a good purchase and I can recommend them for anyone who wants to cover unused rail sections, or for indexing attachments like scopes, foregrips, and bi-pods.5 Stars total:+5 Stars for functional product from a good seller. Shipping was fastNot quite -1 star: Price seems a bit high for such a simple item

High-quality product

Perfect

Great product, looks nice and installs easily but firmly. Highly recommended.

Covers arrived on time and as pictured made of solid plastic in the correct color. Parts are precisely made to fit rail- good product