Swing-N-Slide WS 4467 EZ Frame Bracket for Swing Set Swing Beam (Includes 1 Bracket), Green

These brackets are heavy-duty and have worked great on the swing set for my kids. I had already cut the A-Frame with the 4x4's so there is a overhang on the sides, but this is not an issue with the brackets themselves. They feel sturdy and took out almost all of the twisting motion from when the swings were used. On top of that this is the ONLY place I could find these.

Great quality and got a good price on this one. Shop around before you buy, as the price point can be very wide. Got this one for a really good price, saved $10 each over other stores. It gives great stability to your project. I've used them many times over the years. I'll use again.

A little pricey for these braces, but worth paying the extra money . Easy to install, lines up the angle of the legs for you. Sturdy and will last a lifetime.

This is a fine product. My main issue is that these brackets, and the "EZ Frame Braces," need to be sold as a set. You need a total of four of these brackets (sold as pairs), and four Braces to make a swing set - plus appropriate hardware (lag bolts, screws, washers, nuts, and a one pound box of stainless steel screws) and lumber (1 4"x6"x8' beam, four 4"x4"x8' legs, two 2"x6"x8' cross supports, in my case). Even if you remember to buy two sets of brackets and two sets of braces (I did not, which is why I know have Prime), the instructions are unclear that you need to 2x or 4x the amount of hardware listed on the instructions to actually have what you need for the project. Finally, the list of hardware should be included on the webpage. It's extremely difficult to read the hardware requirements on the EZ Frame website - and it needs to be listed on Amazon as well. Also important - although the Brackets will work with either a 4"x6" or a 4"x4" beam, the Braces ONLY WORK with a 4"x6" beam. My Lowes does not carry the 4"x6" beam in 8', so I originally bought and assembled the swing with a 4"x4" beam - which I had to replace (from Home Depot) with a 4"x6" beam in order to be able to use the braces. Save yourself multiple trips to the store - buy 2 pairs of braces, 2 pairs of brackets, and appropriate hardware. You will also need a bit driver for your drill to install all the stainless screws - which normally comes in the box of screws (be careful - the heads strip on these screws easily). In short, excellent product - but it should be sold in sets to avoid the above issues. Enjoy

We purchased these easy frame brackets for a new swingset that we're building from scratch, without a plan, and I must say we were very impressed. They were so easy to use, and we're going to be ordering more to add another A-frame to the other side of our tower. If you've never build the swingset before, you will need these. They are great and they are a good alternative to the expensive brackets that you see that encase the wood completely. I would say that these work perfectly well, and our little girl is super happy to have her swingset.

These allowed us to easly put together a swingset for my son. They gave the correct angle and allowed us to use these along with 5 4x4's to create the swingset. I bought two of them and used them for the inside of each set of legs. Had I bought 4 we would have used for both sides, but since I didn't think about it and only bought the two, we made the outside supports out of some scrap 2x10 we had laying around. Can't go wrong with these though.

The product description is very misleading and confusing and needs to be rewritten. I copied and pasted the description here: Make note of: This seat features vinyl dipped chains, I should have read this carefully because I thought it read THIS SET FEATURES VINYL DIPPED ....BRACKETS and quickly scanned where it said TWO but didn't note the REQUIRES before it. So it is ONLY ONE BRACKET you are purchasing. Product in itself is fine though. This seat features vinyl dipped chains, providing added comfort for little hands A-frame construction requires two EZ Frame Brackets Can be used on any wooden swing set Carriage bolts, screws/nails sold separately For Residential Use Only. Unable to ship to commercial addresses

Had to rebuild swing set. worked great. These plus easy frame braces a long with Four 4x4 10' long raised it higher the kids are having a ball. I also used 3 2x6s' for the cross beam.

Great product, easy to use and makes building a swing set so easy. With these brackets I was able to build a combination three seat swing set, climbing wall/slide platform and a cantilever toddler swing in just one afternoon. It should be noted that you need to use these brackets along with the Swing-N-Slide EZ Frame Brace, with these two items your swing set will be very sturdy.

Good quality heavy steel. Makes swing assembly easy. Need to also buy the stabilizer brackets to help stabilize the swing or attach (bolt) the swing set to another structure like a play house structure.

No issues, good product.

Work like a charm. You need two per A-frame. The kid love the swing set

So easy to use and they make the swing set good and sturdy