Hoonyer for iPhone 7 Screen Replacement Black LCD Touch Screen Digitizer Replacement for iPhone 7 display with Repair Tools (black)

Description

Thank you for your purchase! Please purchase the correct screen according to your phone model. Be careful when installing and the cable is easily damaged. After receiving the screen, if there are any quality problems, please contact us by email and we will help you solve it.Color:Black Product Name: iphone 7 screen replacement LCD Display Installation Note: 1.Test the iphone 7 screen by inserting the flex to the main board before installation; be sure you feel a gentle snap. If not, try again. 2.Confirm the phone is power off before installation. 3.Do not press the left and upper corners of the screen, otherwise may cause lines on the screen. 4.Each screw should be installed into original location, because they are not same length! Never tighten screw over limit! 5.Treat flex cables gently, use tools instead of your finger during installation , otherwise the screen will damage! If you meet with these issues: Can not turn on, touch insensitive, flash, lines on screen, ghost click etc. Please try this: Power off your phone, disconnect all the cables including the battery cable, clean the connector on the motherboard, reconnect the cables, leave the phone alone for a while in a dry environment, a hard reset of your phone power on. Package includes: - 1 x New iPhone 7 Screen and Digitizer - 1 x Spudger - 1 x Pentalobe 5-point screwdriver - 1 x Pentalobe + screwdriver - 1 x Phillips #000 screwdriver - 1 x Plastic opening tool - 1 x Small Suction Cup - 1 x iphone 7 screen protector