iPhone 6 / 6s VarioProtect stand case by ZeroChroma

I bought this case for my iPhone 6s because I had the ZeroChroma stand case on my iPhone 5s for two years. After that time, the case still fit perfectly, showed no wear, and the stand mechanism still operated flawlessly.This case is a little different than my previous case: The plastic is semi-transparent on the 6s case, whereas it was opaque on the 5s case. But when the case is mounted on the phone, for all intents and purposes...it Is opaque (solid black) in appearance. The previous case had a felt like cushioning material on the interior, while the 6s case is just plastic. The stand operates about the same, but the mechanism is different. It works fine now, time will tell if it is as durable as the one on my last case. The stand will hold the phone nicely in both the portrait and landscape positions...the 5s case was a little unsteady in the portrait position, the 6s case is much steadier...probably because of the extra width of the phone. Both cases have a provision for mounting a wrist strap (like those on P & S cameras). Anyone that has almost dropped their phone while trying to take a picture from a height, or over a body of water, will understand why some of us like to mount a wrist strap on our case. The 5s case simply had two holes to loop the strap connector through (very easy to mount), the 6s case has what essentially a small tunnel you have to push the connector through (I used a paper clip to push with). It took me at least ten minutes to successfully mount the strap. :(The box my case came in was labeled "iPhone 6", but it fits the 6s perfectly. It is snug, with very little flex on the sides (a major flaw with some cheap cases) and mounts and unmounts easily (another flaw with some cases). The back thickness of the case is just enough to protect the protruding lens on the 6s camera. The front lip is just high enough to keep the screen from contacting a flat surface, and protects the rounded edges of the 6/6s screen nicely but minimally (I don't think it will interfere with multi-touch commands that start from the edge of the screen). The power button and the volume buttons are covered, but are easy to locate because of the bumps in the case, and operate easily. The silencer switch, speaker hole, lightening port and headphone port are open.To sum up:Pros:The ZeroChroma case fits the 6s nicely, and is easy to mount/unmount.Protects the camera lens and touch screen.Has a provision for a wrist strap.The stand mechanism operates smoothly and holds its position.Cons:No cushioning material on the interior of the case.Wrist strap difficult to install.Unsure of the durability of the revised stand mechanism.Edit: I am disappointed to report that after 9 months of use the stand has lost most of its friction resistance...so it will no longer hold the phone up. I had some doubts about the stand, which was a different mechanism than the excellent stand ZeroChroma had on their iPhone 5 cases. I have therefore reduced my rating from a 5 star to a 3 star rating.

I just got this case in the mail, and I really like it! My previous case was a thick Otterbox, and it's really nice to have something slimmer for my iPhone 6. I got the blue, and I also like the color - the main part of the case is a translucent royal blue, while the mounting stand is a touch lighter and opaque (I wish they matched, but oh well). The mount is really easy to use. Not only change you rotate your phone to any angle, but the mount can also be adjusted so that your phone is more or less flat, which is a neat feature. It's pretty easy to rotate the mount. You can have it at any degree (0-360), and there are 8 "stoppers" along the rotating mount so that you can get it exactly 0, 90, 180, 270, or halfway in between those positions - which is likely what you most want.Because of the position and length of the mount, you can't stand your phone up vertically - it will have a lean of about 45 degrees. It will have less of an angle to you if you do it horizontally.Con with this case - I don't actually like the way the mount looks when it's folded up. It's this giant plastic circle on the back of your phone, and isn't the same material or color as the rest of the case. It's also a bit thicker there for the mounting material to fit. It just makes the case not look quite as sleek as it could.However - if you like to have your phone standing up, it's a really good case.I got this phone case at a heavily discounted price in exchange for my review, but reviewed it honestly.

I couldn't tell from this listing if it would fit 6s or just 6 since there is a slight size difference to them. I checked the zerochroma website and it said it would fit both, got it and it actually does fit my 6s perfectly.I've had it for less than a day, so so far all I can really say about it is that it fits snugly and the areas where it covers buttons don't cause any issues with pushing the buttons. The kickstand structure is a little different from the way it was done in the zerochroma case I had for me iphone 5 and feels a bit more prone to breaking, but so far no actual issues with it and it does allow any position rather than having to click between positions as the older models did.My only gripes so far are that it doesn't come in red and, more importantly, that the edges have a noticeably feelable seam - I'd take a fine sandpaper to it if I didn't think it would make it look cloudy in those spots instead of clearish as it's supposed to look.

I loved my wrist strap from my other zero chroma cases. When I first discovered them, they all came with the strap. Now they don't 😢 please include them in the box. For as much as we spend on these, there should be a strap included.

This case is a lifesaver for anyone that signs. I prop my phone up with this case and video message my friends. Also great for Facetime, Skype, and Glide. It's nice to have a phone case that I can sign to my friends and family and not worry about propping the phone on my legs or against something on the table. Would buy again in a heartbeat.

This is a very nice case. Folds up flat and holds the phone at many angles. This is designed in such a way that the phone can be easily slipped into a pocket without this stand catching or snagging. I hardly notice it is there when not in use. People ask me what it is because it is just not that obvious. Well thought out design whoever created this.

Great product...but really works better in the form of the ZeroChroma iPad case. I bought this phone case because I LOVE my Zero Chroma Ipad case....I rarely use the kickstand for the phone...and quite frankly it is more difficult to engage the kickstand than its big brother iPad case.

I absolutely Love this case. I use it all the time while traveling when in a rental car i turn it sideways plug the clip into a vent or cd case and use it for maps.Sometimes I use it to watch videos on the plane same thing the clip slids into a pocket or set it on the tray table.