AZUNO Pneumatic Grease Gun, Heavy Duty 6000 PSI Air Compressor Grease Guns with Flex Hose, Metal Extension, Professional Coupler and Sharp Nozzle

This looks like a pretty nice grease gun, I build cars for a hobby. When I got this grease gun it needs to have an air hose swivel that goes into the handle and on the other end of the swivel you put the hose adapter that you need be at industrial automotive or construction, whatever type you have the position of a handle Ames down towards the cartridge holder and it’s very stiff and I want to be able to rotate the grease gun around ergonomically The huge problem in my head I’m going to send it back and ask for another one if it’s the same problem I’m going to send it back and buy another brand, I would rather buy something made in the USA because normally they’re made much higher quality but they do cost a little bit more when I received it that air hose adapter that screws into the handle it came like that and I could not budge that fitting out and I was really torquing on it and I didn’t wanna break the handle, they do not use Teflon tape they just jammed it in there extremely hard and that’s why things break

Very good tool and the quality is there. Good investment

Works when it wants too! Keeps getting air in the gun and I follow instructions to remove air and works for a second then stops putting out grease. Then remove air again works for a second then nothing again. Love wasting grease to see of its working! Then it will make and off sound and not pump at all. Very frustrating trying to grease something and not having it work consistently so I am not sure if everything is getting the grease it should at times. Now past the return window and I have a $50 paperweight that is greasy!

(AZUNO Pistol Grip Grease Gun, 6500 PSI Heavy Duty Grease Guns with Flex Hose, Metal Extension) This was the only grease gun in this price range that looked a bit different and appeared to be better quality than the others. I really like the features, brand and price. Wish I used it so I could compare. Wanted the air gun or battery grease gun that takes tool batteries. Received the pistol grip. Returned it. No problem. Customer service was great. I did not use it nor take it apart. Just looked in the box. General Comment on all grease guns: The reviews of pieces breaking off or not releasing the zerk for this & other brands. I don't work for the manufacturer. You can not remove the grease gun while it is under pressure. The hose, the seals or the gun will break and leak. It's Fluid Dynamics. Besides, you have to purge all the air out most grease guns in this price range. As far a the leaking oil issue and the not being able to remove the zerk....realizing that most directions today of any brand (imported) has little to say. One does not store grease in the gun for extended periods of time. The type of grease gun, grease, an storage will depict leakage and breakage. There are grease guns that try to elimiate this through various to Do you leave the cap off the gasoline can in the garage. NO! Don't leave the cap on either under pressure in 112 degrees or it will burst & leak! ALL of these pistol grip/air grease guns guns look similar exactly the same in this price point. What is up with that? Looks like the same company just made different stickers or paint! ALL the the reviews are terrible for ANY brand listed here regardless of price. The Linco_n had metal filings in it (according to user). Are you kidding me. This is supposed to protect the greasable joint on your expensive equipment/vehicles. Conclusion: Buy one that it rated better than others. Look for your price range. Immediately change the flexible hose to something better quality exceeding the capacity/pressure limits of the grease gun. I might just borrow my friends DeWa_t battery grease gun or try Snap_n and see if there is a difference.

This tool works great once you get it primed. I had to scoop a little grease out of tube and shove it down the suction hole in the head when I initially tried to use it. But after that it has been working great. The stiff, straight metal pipe works great with the conical tip. The conical tip, I have been using for low-profile zerks, such as the type you would find on lower balls joints where there is no room for a standard zerk fitting. They look like little concave buttons. Also, I use it lube my chainsaw bars. I like the clamp-on fitting too. Won't come off the zerk until you press the lever. This frees up my other hand to hold the body of the gun while I pump with the other hand. Although I did install the hose and clamp on an older gun that I have. This enables me to have two guns ready at the same time. A real time saver! I whole-heartedly recommend this gun!

Pneumatic Grease Gun: Using with 14 oz. Cartridge The grease gun arrived quickly with no damage and seems to be well built. I followed the directions on how to load with grease and had no problems getting the grease primed. I used it to grease my mower and it worked as it should. I have not had to reload with grease yet and hoping that will be as easy as the first time. So far I'm happy but time will tell. It was priced reasonable so I took a chance and so far it was worth it. I did appreciate the instruction booklet with pictures to help in the set up and loading the grease.

Not really made for commercial use

This tool was to replace my hand-me-down tool. The pump had a few leak areas but not anything compared too what I had before. I had a couple issues with pressure and grease not being pushed but I think that was lack of practice on this new tool. Overall did the job and much better than my old tool. I would buy this for the great value and accessories you get with it over all the others. Jobs done, U joins, and suspension ball joints