chenyang 2 Pack ATX 8Pin Male to Female 180 Degree Angled GPU Graphics Card Power Connector Adapter

Works solid on a EVGA RTX 3070 FTW3 ULTRA. Please note you need to buy 2 to have power for both power connectors on your GPU! They sit low and can fit in a Terra Fractal case perfectly. Solid buy, well constructed.

Read a review on here that stated they used it on this particular card and wanted to fit this into an NR200P case in vertical mount. My previous card, a Zotac 1080 Ti AMP, fit into the case vertically with a slim fan in the top. The FTW3 did not. Rather than removing the fan, I purchased three packs of this item and routed the cables down. This is excellent for cable management/aesthetics and for function. The cords don't come close to the fans at all now and are easy to route.I did have a 3.5" HDD mounted behind the GPU previously, but that is simply impossible now with the cords being routed down. Oh well! That is the life of an SFF build.I'm hitting proper benchmarks and power expectations so these seem to be functioning great.

This is one of those odd adapters that I pictured in my head for a specific use case and sure enough a quick search of "pcie 180" brought me here.I ordered 3 for my new workstation build, and I will be ordering more for my SFF travel PC.I want to echo some key points other reviewers have made:- You will receive 2 adapters, but they are not the same. I ordered 3 to connect 3 PCIE 8 pins- The b version has an odd wiring that I don't fully trust. The grounds and +12 pins are ganged. Electrically it is probably nothing to worry about, but I personally wouldn't want to use the 'B' version in a build.This picture shows the normal version, not the 'B' variant.

If you need TWO 180 degree adapters to go the same way you need to buy TWO 2-packs. Yes, you heard me correct. Look closely at the pin-out and you will discover that one is meant to be 180 curving around the top and the other is meant to be 180 degree curving around the bottom. I'm not sure how the other is even useful for modern graphics cards. Perhaps other graphics card manufacturers place the pin-out the other way. I only buy EVGA GPUs so I l can't speak to that, but that would be a very good reason to include one going each way. Anyway, do yourself a favor and buy qty. 2 if you need both to go the same way. After buying another, it appears to be working just fine and is exactly what I needed. Only time will tell if it lasts and doesn't damage my card or anything else. I'm always reluctant using cheap adapters on very expensive graphics cards but so far so good. If nothing is melted or damaged a year from now and the adapter continues to be removable relatively easily I may update to 5-stars if I remember to do it.

I just finished my build in skyreach S4 mini and it wouldn't have been possible without this adapter. Using a RTX 2060 KO Ulta in a case about the size of a PS4 doesn't leave a lot of room for your traditional GPU cables. Without this adapter, I wouldn't have been able to get power to my build and I am so glad that this purchase came with two adpaters. I wasn't sure which one would be needed so I didn't feel like I was taking a random shot in the dark.

Be aware that the two included adapters are DIFFERENT! One is keyed for an upward orientation the other is keyed for a downward orientation. Look closely at the pictures in the description. This does not take from the functionality. However, YOU WILL NEED TO ORDER TWO PACKS if you require two 8 pin power identical connectors keyed for the same orientation. I docked two stars because it makes logical sense to any consumer that a seller will sell two of the same item, in the same pack, if it's advertised as a dual pack. Or if not, it should be made perfectly clear in the initial product title, NOT THE DESCRIPTION, that the included adapters are indeed not identical and are keyed differently. It's bad practice to force potential buyers to rely on scrutinizing a picture and reading a description with a fine toothed comb for an item like this. The vast majority of the buyers of this item require two identical adapters in the same orientation, therefore this forces them to order a second pack, but only after they receive the package. The product is fine and does work for its intended purpose, so I was forced to order a second pack to complete my purpose for purchasing. However, now I have paid double the price and have two absolutely useless adapters left over.

I have a mini itx build with a RTX 2070 which was located so close to the AIO cooler fan. I needed something that allowed the 6 pin and 8 pin cables be attached without touching the fans. These units came in just enough to clear that space and make it all work. The foam insulation on the top of the PCB bridge is attached with a poor quality glue, and will peel off easily. However you can always glue it with a better one. Overall I'm happy it worked perfectly.

These things are poorly thought out. The PCIe power cable from my PSU do not fit the plugs. Works fine fitting the gpu but the PSU PCIe power plugs have some plastic ridging on the plug housing to insure they are plug in the right way. This is an obvious industry standard since the gpu power connection has gaps for these ridges. The adapter happens to have similar construction for that part that plugs into the gpu but not for the part that is supposed to connect with the PSU. Yes I can probly cut away some of the plastic so I can make them usable but I should not have to do this.