RED 1/2’’ Double Sided Tape

Our bathroom mirror had an imperfection ripple in it at the bottom 1/4”. I just hated looking at it. The cost to replace the mirror was $1400. I found a brushed nickel mirror strip from an online site that matches exactly to the Schluter tile edge frame. The tape was a perfect answer to get it to stick to the mirror. Since it is clear you don’t see it in the reflection of the mirror. Peeling off the red film is a challenge. This worked. Take a metal strip (nail cutter handle and put the edge of the tape on it. Use tweezers to pull the corner of the red tape off. It may take a while but it will come odd. Pull off what you need and use it but leave and inch of extra red film at the end for the next time. Keep it in the plastic bag so the edges don’t collect dust. Solid product.

Was looking for something not damaging to walls to hang fairy lights all around the room. This worked perfectly, has a strong hold. Lights are still holding on.

It was what I wanted in terms of size, quantity and price. Users reported it difficult to remove backing were probably referring to subsequent uses. The thin backing is nearly invisible so I can see how some might get frustrated. Another reviewer suggested to leave a bit of backing exposed by folding the end of tape on itself to make it easier to grab the backing for next use. That worked for me. Yes it is very sticky, I consider this 'once and done' since repositioning would be difficult if not impossible. Think vinyl sticker "stickiness". I placed the tape at the start knowing where I was going to end up. I unrolled the tape as I went, pulling off a couple inches of backing as I pressed in place. When I reached the end, I made sure to leave some exposed backing. Don't remove all the backing at once. If you do, the tape will stick to itself and stretch as you try to maneuver into place. I applied the tape to the backside of a metal microwave door face plate. The hardest part after removing the mfg adhesive on the plate, was landing the taped-up plate exactly where it needed to go on the 1st try. 4 stars due to minimal packaging, no instructions or product specs.

Sticks well —make sure to leave some double take bare when you cut it!

This is very strong cape. I love it for holding heavy things my wall.

Tape does not stick to hold led lights on the wall.

This tape is very sticky but also very thin. It literally takes 25 minutes to try to get the red layer off the tape to use it. Just too thin while the red layer is thicker. Quite frustrating. I mistakenly subscribed and didn't cancel soon enough and am stuck with a few rolls. One if my least two-sided tapes that I have ever used, for sure!

Love this product, was used to hold the cover of the passenger mirror of my car that broke and so far rain and shine it’s still in place in Miami Florida weather!

Not really happy with this. It sure does not look like the amount in the photo

Did the job. Happy with my purchase.

This has great adhesiveness, although it is not as wide as I originally thought. That is my fault for not checking the measurements. I used this in my refrigerator, and it works really well, so it is not affected by cold.

Does the job

Difficult to detach tape and cover