Torque White

Great design. It is huge, it is expensive, and it has a major flaw that Antec could fix with a tiny amount of work. Design: The aesthetics are unmatchable. Just a really cool look that is clearly "different" than what people are used to. Beyond aesthetics, the design is just really well executed and there isn't a single flimsy piece of metal or plastic anywhere to be found. Its built like a tank and it looks like it could survive a fall from an airplane in flight. Huge: It's very big. I've built around 40 PCs over the past 15 years, and none have been even close to the size of this beast. It's just really, really big and you won't really get a real understanding of its size until you try to find a place to set it up that doesn't hide it under a desk or table. Expensive: No real explanation needed here. This replaced a PC I built for myself 9 years ago. I spent more on all the components that I was used to, but figured if I could get 10 years out of the rig, it would be worth the price. Very happy I spent the money. MAJOR FLAW: Instructions are minimal, and there is NO mention of the need to install the glass BEFORE installing the motherboard. I think virtually everyone would hold off on installing the glass after the build is complete, and that's because it is how it has been done with every other case in the history of PC building. One of the posts needed to mount the glass cannot be installed with the motherboard installed, so if you screw up like I did you can either jimmy the glass in place (which I did) or you can disassemble your entire rig, remove the motherboard, install the post, and then rebuild everything (which I was not going to do). All Antec needs to do to fix this is include a sheet of paper explaining the post install, they could write it in crayon or in their own poop, just include it to prevent the frustration that many people are encountering.

ok, so i LOVE this tower! im a person well known for hating cliches. i love customizing everything and making everything my own. this case, is that just in itself. no 1 will ever have a case like this or anything close. youre able to stand out immediately. as soon as ppl walk into my home, they instantly notice my PC, and its almost always an immediate what is that!?! i love it. only down side, is i wish the case had a few more USB slots, as in the world of today, everything requires use of USB. i also wish the plastic on the outer most part of the case, was just a tab bit stronger. i feel as if, if i were to slide the pc around by pullin on the plastic, or metal, im going to bend it. just a little more durable stronger material, and a few more USBs, would make this case an all around 5 star case. none the less, even with those 2 flaws, the case is amazing. the pricing for the case, is on the majorly expensive side. no case should cost as much as this does. the case itself doesnt do or provide anything extra or special, outside of its unique appearance . the companies are making quite a profit off each case sold, thats for sure. So, again overall review, its a great case, for those in love with customizing and uniqueness. its not so good a case when discussing pricing, material used to make it, and USB ports it could use improvment. Thanks for reading

Really great looking case. Was easier than most cases to get access during build. Side pieces come off easily to gain extra access. It is big and heavy but lighter than most cases in this category. Mounted a triple fan cooler and Antec RGB front fans and they are really quiet. It takes up to an EATX motherboard which I did use. The paint finish is very durable and the materials used are top quality. Very solid and ridged. Glass panels and other removable pieces line up almost perfectly when reinstalling, no twisting or force needed when replacing them or removing. If you want something unique, solid and very good looking this is the case to use.

to start, I posted my original review against seller, being Antec's prime account, with a 2-start rating. --- Took a longer than expected for the case, but not a big deal as I am not in a rush on this build. However, upon opening the box, found 1 of the 6 5/8in barrel brackets that secures the glass panels to the chassis is missing. I dug through the entire box to find this bracket to no avail. This is quiet an important piece to properly secure the glass. I have opened a ticket with Antec. --- Well, a week and couple days later, I have the missing "screw" for the glass which is the upper left screw holding the glass panel on (pay no mind to, what looks like, a scratch on the glass, that is the plastic still on the glass). giving a 4 star as the box was missing the one screw in the first place. Going to remove the feedback to the seller. Bad Points: Building with this case had its differences to the typical cases I build. Cable management is not really there and no place to hide cables. couple of the pieces of the case seemed weak. No reset button. I don't think this should be considered a mid-tower when its larger than my full-tower. Good points: Being so open made resetting the bios easy. it's a trip to look at. The case is also the first where the mainboard was perfectly aligned with case and slots. No tweaking or adjusting anything, and the video card was perfectly aligned from the start. Lastly, if you run your room about 75F, that case is cold. No issues with overheating. Overall, I'm extremely happy with that case and the system at this time and think it will fit in great at its new home.

Great case for gaming enthusiasts or those who want to have the coolest tower for their home PC. Mine is water cooled so having super easy access to the bay is a dream. I also love how it by looks it blends the ghost from Destiny 2 with the coloration of a Stormtrooper - I got the white case (nerd alert lol). Everyone who comes to my house and sees it is blown away by how cool it looks.

I pined over this case for a few years. When I saw it starting to go for crazy amounts of $ on other sites I decided to treat myself for my bday while it was still available at MSRP. It’s a lot bigger than I realized, I knew it would be but wow. Tall and hefty. The box is almost the exact same size as a secret lab titan box. Very happy with my purchase. And wife is happy to take my fractal meshify s2 (also a very very well made case 0 complaints) Got a vertical gpu mount from cable mod to display the kingpin front and center. Issue with the meshify was not enough airflow on vertical mount, open air case solves that problem.

Absolutely love the case! Everything stays cool and aired out. The only trouble I had was putting it back together because that are quite a few screws, and, because it is open, there’s not really anywhere to hide your cables, but that’s expected. 1000/10 would absolutely recommend this case if you know how to take care of it.

It was a really easy build. Looks awesome. However, it is expensive for just being a tower.

The master class !!!!

Beautiful work of art, but had quite a few small paint defects, none worth RMAing for, but at this price I expected better craftsmanship. For instance there are minor blemishes in the paint, including a 1.5” hairline crack in the paint in the top panel, and several 1/8” chips in various locations. Also, includes no fans or controllers, so overall it’s a pricey investment.

Rejoice for the modders, custom build makers. This open a whole lot of options for the custom makers. Beautiful to look at and easy to work with.

Venditore top spedizione veloce tutto perfetto molto professionale così acquisti 10 ++++++