SSD HDD Holder 2.5 to 3.5 Mounting Bracket Hard Drive Adapter (2 Pack) (Black)

I recently purchased the SSD HDD Holder 2.5 to 3.5 Mounting Bracket (2 Pack) in black, and I’m really impressed with the quality and functionality. The brackets are sturdy and made from durable material that feels very secure once installed. They fit perfectly into standard 3.5” drive bays and hold my 2.5” SSDs tightly without any wobble. Installation was straightforward—came with all the screws I needed, and the design makes it super easy to mount the smaller drives without any hassle. The black finish looks sleek inside my PC case, giving a neat and professional appearance. These brackets are a simple, affordable way to upgrade your storage setup and make sure your SSDs are safely and properly installed. Highly recommend for anyone looking to add 2.5” drives into larger bays!

Fit perfectly to the tower computer case and Kingston SSD with all mounting holes aligning plus included plenty of fasteners to get the job done. Frame was nicely eased to allow all connections to be easily made. Note that for others who are novices a diagram showing drive orientation would be a good idea.

I needed to install a 2.5 inch SSD in an older computer with 3.5 inch bays. This bracket fit perfectly in the bay, and the mounting holes were correctly placed for the drive and the attachment to the case. It's all metal, and includes the screws needed for installation. Quality of construction is good - no sharp edges.

Bought this for a client who was looking to upgrade her HP AIO to a SSD drive. It was an older AIO so it still used a 3.5" HDD as oppossed to a 2.5" HDD found in more modern ones. First off, these aren't anything fancy, but their well built and comes with enough screws for mounting the SSD and the bracket. Also, price-wise, these are the best you'll find in a 2-pack. That being said, here was my issue. These only only the SSD to be mounted in the middle of the bracket. Typically fine in most desktop cases. However, in the AIO I worked on, the SATA cable from the mobo was like most laptops...short and location specific to where the HDD cage/bracket is. What I needed was to be able to mount this on the right side of the bracket and not right in the middle. So, I had two options, wait and order a SATA-to-SATA connector or rig up something to make it work. I chose the latter. I drilled additional holes in the bracket to line my SSD to the right side and all was well. Not ideal, but still did just fine. I wish these brackets had multiple mounting options to make it where it can be mounted left, right or center. Overall, the product was fine. The screws could be better...felt they could easily be stripped. Build quality was fine, nothing special or above the rest. If you need something inexpensive to put a 2.5" SSD in a 3.5" bay, this should do you just fine. Just ensure a center mounting location works for you.

Love these hard drive mounting brackets, does what I need. My only problem with them, which I won't take a star off for, is that it doesn't align the SATA ports with where a 3.5" drive would have them, which means you can't use these brackets to go in 3.5" hot swap drive bays. But, if you have normal bays, like in a regular desktop computer (which i imagine is over 95% of those that would buy something like this), these are PERFECT for that. I used these brackets for that exact purpose for a while, but then my needs shifted to hot-swap bays, which is when I figured out this slight oversight (more on my part than theirs). I mean, it's just a piece of metal with 2 bends and some holes in it, so what do you expect?

Don’t fit a 3.5” drive as claimed! 2.5” works fine, not 3.5”!

The metal is very thin and the side screws are tapped with a standard thread (they provided screws with a metric thread. If you want a cheap solution for mounting your SSD, this is it. Way better than using double stick tape.

This is one of the few products like its kind that I have found on Amazon that works and is what it's supposed to be. most all the other adapters I have seen all have the same size screws that fits the 2.5" SSD drive. Even for mounting the adapter in the drive bay. Which does not work very well because the heads will go through the slots in the case drive bay. Not to mention your case crews wouldn't work. Whoever designed and created this adapter has put one in a computer before. :)

Great mounts, easy to use