Guyker 6Pcs Guitar Machine Heads (3L + 3R) – 1:21 Sealed Tuning Key Pegs Tune...

Solid machines, look great, hold tune awesomely! and a very inexpensive upgrade to the run of the mill machines that come on inexpensive guitars, inexpensive can sound properly also, easily installed with 10 mm wrench and small Phillips screwdriver.

Unlike most of the reviews you’ll read here, I’ve been a professional musician for over 50 years. I’ve owned both good and bad equipment, and plenty in between, and once owned a collection of over 40 guitars, upgrading & repairing them all myself. Well, I’m retired now, and down to just 3 guitars. I used to turn up my nose at Chinese guitar parts, but these tuners are awesome! They reek of quality in both design and manufacture. The tuners fit my Peavey DW3 Without any drilling or modifications, fixing the sole issue with that under-rated guitar. Each tuners turns smoothly and holds tune well. And the price was incredibly inexpensive. Rarely do I find a product worthy of 5 stars on Amazon, but this is it. Don’t think twice - whether you need then for an upgrade or to replace defective parts buy these tuners. They won’t be cheap for long!

The budget accoustic guitar I bought was great for $150 but the tuners were too knotchy. So I saw these and they looked like the perfect replacement ( which they were) for the crummy ones the builder used to keep the desired price point. So I ordered & received these 2 days later and put them on in less than 45 minutes reusing the same strings. Beautiful and superfantastic ! The only thing I noticed was how much longer it took to wind the strings due to the gear ratio...plus side, it's easier to fine tune!

Great quality at an affordable price. Looks amazing on my Taylor 818 and gearing is great.

Yes I have real Gotohs of this style, the Guyker are a very close second, they are precision made and they really do a great job, I got a set of two for my 12 string and perfect plus far superior to the originals they replaced, I would buy them again. I could care less what some of these review snobs say about these tuners, their wrong, buy them

I bought these to replace the OE tuners on my Ibanez AS53. These are a direct drop in replacement. No modifications were necessary to fit them onto the headstock. These tuners are fairly heavy and the machine works is very good. The 1:21 ratio allows for much more precise tuning than the stock tuners. So far tuning stability has been great. No complaints. For the money it is hard to beat the quality of these guyker tuners.

Miles better than the wonky ones that came on my cheap Asian Les Paul.Made a huge difference in tuneability and stability also.They move very smoothly and the hardware is just better,wonkiness is gone.Nice tight tuners.These are priced below some other brands but the quality is there.Made my guitar more a pleasure to play.Now I need a bone nut and then it should be right.

These 1:21 tuners are not only hard to find, but an AMAZING value for the money! The tuners are heavy and feel quality. The tuning peg takes a minute to turn around as can be seen in the video I submitted with this review. If you have a tough time screwing in the nut for the top of the tuner, I would suggest immediately returning instead of potentially stripping the thread in the product. I had no issues with mine and am looking very forward to installing them on my Firefly 335! I have honestly never owned a hollow body and am looking very forward to not only owning one, but also upgrading it to make it a piece I keep and have many years of enjoyment with. Tuners are well packaged and will line up with the stock tuner holes which is the biggest plus in the world for me as I hate guitar headstocks with many holes in the back where tuners once were. These are perfect! Would I install these on a USA Gibson or Fender? Probably not as I like to keep those stock for value purposes. But I would put them on any guitar I build from the ground up myself or on any guitar I like which is worthy of an upgrade. Have fun playing and make good music everyone!

Very well made and look beautiful 😊🎸

Optisch wie haptisch und ergonomisch meine Lieblingstuner! Technisch weisen sie leider 2 Schwachstellen auf. So ist die Aufnahme der Welle in den fishtail- Drehern zu unpräzise uneckig und führt bei einigen Tunern zum Spiel. Bei den Kleineren ist es noch schlimmer! Abhilfe schafft man da, indem man eine dünne Schicht UV-härtendem Sekundenklebers auf die Flachseiten der Welle streicht und härtet. Habe es so, bei allen die Spiel hatten beseitigt. Außerdem empfiehlt es sich, die alten Hülsenmuttern zu verwenden da diese meist länger sind, die Guykers sind ziemlich kurz für eine vernünftige Verschraubung bei normaler headstock Stärke. Was leider noch hinzukommt, ein schlechtes Gewissen. Die Tuner sind eine Kopie von Gotoh (Japan) die für ein Drittel des Preises verkauft werden. Sollte ich doch eigentlich soweit sein made in China komplett aus meinem Leben zu verbannen, wie beim Plastik, fast unmöglich! Überall drängt uns China aus den Märkten und bildet mit Putin die Achse des Bösen. WIDERLICH!

Excellent produit, mécanisme doux et précis... J'ai été un peu déçus quand j'ai réalisé qu'ils ne barraient pas, j'ai tellement cherché pour obtenir selon mes critères de recherche qu'il semble que j'ai oublié, ultimement, qu'il devait barrer et me permettre de changer les cordes rapidement. Mais bon, ils sont très jolis et surtout très précis sur ma Ferder accoustic. Très efficaces aussi lorsque vient le temps d'ajouter de l'harmonie, jusqu'à présent, le mécanisme est très fiable et je peux piocher comme je le sens... sans craindre de désaccorder trop rapidement.

Tive que comprar para usar com cordas 014, mas uma veio a com a parte da rosca espanada.

Ottime...rifinitura impeccabile e tiene l accordatura.... ottima sensibilitá x ottenere accordatura perfetta