12G Internal PCI-E SAS/SATA HBA Controller Card, Broadcom's SAS 3008, Compatible for 9300-8I

Out of the box this worked with Truenas SCALE. The 6 new drives I added came right up, no issue at all. No need to flash or anything. Literally plug and play. Bought this with 2 SFF-8643 to SATA connectors, and plugged those into my WD red pros. The SFF-8643 to SATA plugged right into the two slots available, and that extended me out to 8 total drives.

I’m running this on a Linux host that serves VM’s to the local LAN. The storage for the VM’s is all hosted on this HBA. I have eight SATA disks attached of various sizes, ranging from 1g to 4g and have had no problems with either stability or performance. They run as a JBOD with the file systems on them being a mix of simple disk, mdraid raid 1+0, or ZFS, over the testing I’ve done. The drivers came with the Linux kernel, which made installation pretty easy.

it works well as advertised and it comes in IT mode, its fast and it doesnt get as hot as other say but who knows parity check up is an ordeal with unraid

The HBA came in IR mode. I flashed it to IT mode via an EFI bootable USB stick. The benchmark image is for an attached Seagate SAS 20T hdd under linux. You might get better results with 8x but it's certainly usable at 4x. Anyway, I'm happy with this HBA.

I should firstly say the card looks new and legit and it was detected no problem. However when I installed TrueNAS and attempted to create a pool of 5 drives it seemed as if two of the drives were faulty. One always blames the drives first because maybe they were damaged in transit. But I was wrong. Through a process of elimination (swapping around cables between drives and ports on the card) I was able to establish conclusively that of the 8 breakout ports the cards supports, 3 are not operating properly. Unfortunately for me, it took a while before I was able to get all the components and build this system so it appears I am just outside the Amazon return/replacement window. While I do currently only need 5 working ports, it makes me uneasy that there may be some other issues and my data is worth more than the card. I'll probably be looking at other options for replacement. Update: Amazon sent me a replacement card that is working without any issues. The supplier was also prepared to do a replacement, which I appreciate. So all good here. :-)

Advertised as IT mode, but mine came in IR. Just used instructions found online to flash using sas3flash to 16.00.12.00 and good to go. Added a baby Noctua NF-A4x10 FLX with some zip ties to keep it cool.

Good controller card. Used in a Proxmox server with PCI passthrough for a virtual machine without issue. However after 10 months, the card unexpectedly died causing the entire server to be unable to boot. Will be replacing.

Port 0 and port 2 constantly reset causing major headaches.had to rebuild a 200tb array due to this card. Changed to a different card. Had newest firmware and drivers.

Inserita in un server HPE DL380 gen10 con sistema operativo VMWare EsxI8u3 per collegarla a una vm truenas, la scheda è stata subito riconosciuta dal virtualizzatore. Attivato il passtough dentro truenas ho subito trovato tutti i dischi collegati. Consigliatissima per utilizzi simili.

Ein sehr guter RAID-Controller für relativ wenig Geld. Ich hatte ihn schon vor fünf Jahren in's Auge gefasst, mich aber für einen anderen Controller entschieden. Im Gegensatz zu diesem hier war es ein mehr oder weniger Software-RAID, während dieser hier einen "echten" Controller hat. Das merkt man, wenn man Sicherungen mit TrueImage Bootmedien machen möchte. Die Alternative hat den RAID-Verband nicht durchgereicht, sondern die HDDs einzeln angezeigt. Erst mit einem auf Windows basierendem Bootmedium mit integriertem Treiber wurde der RAID-Verband als solcher erkannt. Auch konnte Linux (Mint) nichts mit dem Controller anfangen. Und jetzt mit dem Broadcom? Alles bestens!!! Linux erkannte sofort den Controller, installierte den passenden Treiber und das Bootmedium (mit Linux) von TI erkennt sofort den RAID-Verband. Was will man mehr? Klare Empfehlung!! Kleiner Wermutstropfen: für den Anschluss der SATA-Platten an den Controller war noch ein Kabelsatz nötig, der aber bei Amazon vorrätig war.

No drivers, no website online ... not detectable con windows w11/server/w8 ... perdida de tiempo y paciencia

Not for consumer NAS. These cards ship in IR mode which TrueNAS and most NAS software cannot use. Flashing to IT mode requires old legacy-compatible motherboards and modern hardware will not work. Unless you want a $200 paperweight and endless frustration avoid this card. Buy one preflashed in IT mode from eBay instead from those who have the hardware from the early 90s to flash it. Save your money, this product sucks, be warned do not buy this.

Excellent, works exactly as expected