Gunsmithing Hammer with 4 Tips

Compact Brass Hammer with Versatile Interchangeable Heads This small brass hammer set turned out to be one of those tools I didn’t realize I needed until I had it. The size is perfect for detail work—compact enough to control easily, yet with enough heft to deliver a solid, precise strike without overdoing it. The real win here is the set of interchangeable heads: brass, nylon, aluminum, and rubber. Each one serves a specific purpose. The brass head delivers weight without marring steel, the nylon and rubber are excellent when I want a softer strike that won’t leave marks, and the aluminum fills that middle ground. Swapping them out is simple and secure. It’s been especially handy for small gunsmithing adjustments, pin work, and delicate DIY projects where a standard hammer would be too aggressive. The handle is comfortable to grip and feels balanced, though it’s not a heavy-duty hammer for major tasks—it’s meant for precision, and it excels in that role. A minor thing to note: like most interchangeable head hammers, the heads can loosen slightly with repeated strikes, so it’s worth checking them from time to time during use. Bottom line: A well-designed, versatile little hammer that shines in gunsmithing, jewelry making, and other precision projects. It’s earned a permanent place on my workbench.

I needed a cheap thwacker with interchangeable heads for my workstation. This fits the bill perfectly, and it's well balanced. I use it for light hobby work, nothing serious. The heads do tend to loosen up easily, but a dab of blue Loctite took care of that. The only thing that has me scratching my head is that rubber ring around the shaft above the handle. Is there any real purpose?

Despite the bad reviews of missing and malformed tips, I took a change. I got a decent that works well. the tips are flat and even. It feels sold and handle some very hard kicks. No loose tips flying across the workshop. It came not in a package but in a tied off plastic bad. I was a bit concerned but I took apart my Star BM and it did the job with no issues. it ismuch smaller than the tekton hammer and fits nicely in my kit: https://www.amazon.com/gp/product/B0141IMD38/ref=ppx_yo_dt_b_asin_title_o04_s01?ie=UTF8&psc=1 This case hold all my cleaning and smith tools fro small arms.

(EDIT ~2 years after purchase: 'The little hammer that could'. It's helped assemble a few AR receivers. Whacked several stubborn roll pins into submission. Tapped in oodles of well-behaved roll pins, too. It's never marred anything and the brass tip is hard enough for 'serious' work, while still soft enough that it won't damage Al receivers if (God forbid) you make a mistake. Threadlocker (blue only) makes the difference between tips that come loose or a solid & functional tool. As it turns out, my concern RE: its rather small size/weight was unwarranted. You don't need or want a 16oz hammer to work on guns - the little hammer is perfectly sized and has plenty of heft to do gunsmithy stuff. I'd gladly buy the same little hammer all over again.) A very nice little hammer for the cost. It is smaller than I expected, but I didn't perform my due diligence in confirming it's size prior to purchase. It will definitely do the job. Two minor issues: 1). Some people note that the tips can back out, unscrewing from the hammer itself. Blue-colored Loctite or other brands of threadlocker will prevent the unscrewing tips from driving the user nuts. 2). The tips are steel, brass, rubber, and nylon. The rubber and nylon are practically indistinguishable from one another, and are UNLABELED. I am happy w/ it, and look forward to using many times.

Perfect

I was a little suspicious. but figured worth it especially for 4 heads nylon/brass/steel/rubber. Used it yesterday on a M1A trigger group and it's great, perfect size and better deal than the 1 inch headed one Brownells sells. The heads on this one are 5/8" wide, which for me is better. On a new M1A with a stubborn op rod the rubber head is great to have for light tapping too. Head/s can come loose, but just use Teflon tape or blue Loctite (a TINY SMUDGE) which takes care of it. Not sure where/if can get replaceable heads as there was no order form shipped with it so will have to find out. Just REMEMBER - this is NOT a dead blow hammer. Use it for it's intended purpose. This will get plenty of use for all guns/calibers.

Great hammer with a selection of heads make it very versatile for small projects where a regular hammer is either too large and too heavy.

It worked as intended, no issue with missing heads or head alignment. For the price paid - works as needed. Hammered hardened punches on rust-frozen pins on a pistol rebuild. I was afraid of breaking the punches. Brass head worked well in that situation and I would recommend it to the hobbyist gunsmith or anyone that would have to do roll or other pin work. I used the translucent polymer head to set one pin in place and zero damage on the slide's finish. Well worth the low price. I would re-buy if this were to wear-out.

It is exactly as described, I didn't think these tiny little metal headed mini mallets existed. They're perfect for working with restoring more delucate things!

La calidad es excelente , solo que el tamaño si fue un poco más pequeño de lo que esperaba , pero funciona muy bien