Official Creality 3D Printer NTC Thermistor Temp Sensor 100K for Ender 3 / Ender 3 Pro/Ender 5 / CR-10 / CR-10S

Arrived quickly, good long length, fit perfect for the Ender 3 and work fine, having 5 means I don't have to worry about buying them again for a while.

Worked perfectly

My temp readings have been flickering on my ender 3 for a while now. Changed thermistor with one of these and it’s perfect now. Great value for 5 as well. I’ve only ever changed my thermistor twice in 4 years so they will last me ages.

I have 2 original Ender 3s and the thermistor on the hot end of one of them started reading way out. Bought these and happy to find they are a direct replacement for the original. Correct length and everything and after fitting all 4 thermistors on the 2 machines were within 1 degree of each other so it seems pretty accurate. I knocked one star off as I only really wanted one - two at the most so I had a spare but I had to buy a pack of 5 so the rest will probably never get used.

Thermistor that arrived with printer was smashed to pieces in travelling, and always good to have a few on hand to replace if needed. good long cable, means no gerry rigging!

Inexpensive, seem reasonable quality and they work without the need for calibration or mucking about. Straight swap, feed through the "snakeskin" plug in to the control box. Durability seems at least as good as stock (they look identical and no replacement has died yet after a few months 24/7 use).

After reading a few bad reviews I thought I'd just try them for the price that they are, tested them on a multimeter and they all checked out perfectly, as for a people complaining about short wires mine were easily 2 foot long, you might need to solder on new connectors but that's worth it for the price

Bought this product thinking it would be good replacement for my faulty thermistor on the Ender 5-Pro but the glass head of the actual thermistor is too large to fit in the default nozzle hole. After slicing the wires to connect them to the right connector I found out the hard way that they do not fit I am still giving this product a 3 star as the product itself is good, and will probably (Cannot confirm) fit most other printers. This is mostly down to my own error, But never thought that this would've been a problem on a thermistor that is described to fit ender 5 pro

Es lo que pedí, nada más nada menos, el precio me parece bien

Passar till Ender 3 V2 gör det den ska

I am a 3D printer novice and learn by making mistakes. I bought a Creality 3 V2 NEO hot end kit and unwittingly removed the thermistor and its wires. This rendered my 3D printer non-operational. I thought I could use the existing wires rather than install the entire hot end kit wires. This thermistor cable must be delicately installed in the hot end and only use the screw to hold it in place and not short out the thermistor wires. I used the existing defective white wires to pull the new thermistor back to the motherboard.

Passt einwandfrei Ender 3Pro

Bien cableados y soldados. Recomendables