Magnetize-It! Standard, 32 oz

Initially I was going to paint over this to camouflage it with my kitchen wall, but I ended up liking the faux chalkboard look for my toddlers art station

I was very excited about trying this so I could “hang” frames and decor on my walls instead of putting holes in my walls. But the magnetization is Very weak! I went a little crazy In my application at first, because I wanted to use it all over the house. And despite I mixed it well, it didn’t go very far. It’s very thick. And once I read the directions, it stated needing 3-6 coats. I was able to finish the areas I highly desired with 3 coats, and I had a strong magnet to try on it, but it barely held, let alone a frame or even a piece of paper. So I tried another can, so I could make my 6 coats, and I don’t notice a difference from when I only had 3 coats. I even proceeded to order their magnets to try on their paint, just in hopes, maybe that’s what I was missing. But still no different. In fact, I have yet to paint over it, which I’m dreading, because they called it grey, but it came out to be black once I used it, and I’m sure 1 coat of latex paint is not going to cover it, along with the fact, I can’t help to think painting over it will only weaken what little magnetization there is…$50 down the drain, just on the magnetize it paint, let alone the magnets and extra latex paint in order to paint over it.

This product was not what I expected. The paint has the consistency of pudding, making it difficult to spread. The wall space painted is 55” x 80”. One 32oz can was barely enough for 1 coat. I ordered grey anticipating the paint would be grey not black. The paint itself is gritty, making surfaces rough. Make sure you cover/tape off any surface you don’t want to sand after like trim and baseboards.I am disappointed with the produce description also. No where in the description does it say how many coats are needed or recommended for desired magnetic effect. Nor does it mention how many top coats can be added before it looses magnetization.As you can see in the picture the magnetic paint is black, not grey, painted over a lighter color. The idea was to create a magnetic wall for my teen’s room with the lighter color as the top coat.

I bought this primer so I could hang magnets on a utility cabinet in my kitchen. The kitchen is mostly white with some light grey accents.When I bought the primer it came in 3 colors - black, dark grey, and grey. I bought grey hoping it would look better in my kitchen. However this primer was definitely black. Because of that, I ended up having to paint over the primer with several coats of a grey paint. Not sure why they would sell 3 colors of they're all black anyway??Painting was a bit of a challenge. The primer was VERY thick and splattered pretty badly when using the roller. However with proper prep that wouldn't be as bad. I should have put more cover on my floors so I didn't have to clean as much primer from the flooring.It works OK. Based on other comments, I put on 4 coats of primer. It's not the strongest surface ever and I do worry about some of the magnets staying put. But it does work.The only type of magnet I couldn't get to stick were the ones that were more "rubbery". I added a picture as an example. And I had a few with weaker magnets that wouldn't stick either.

This paint worked great! I really am not sure how many coats I did but it was somewhere between 3-6. This is strong enough to hold all of our magnets (I was worried when I was testing inbetween coats because it didn’t seem like it was holding well but after it dried it has held even the heavy ones without sliding). I only used about half of the can…I will be using this on many other projects now. Also, the paint is very thick which was actually beneficial because it didn’t sling off and make a mess at all 😃 I’m so happy that I bought this!

The media could not be loaded. The product is clumpy, I assume because it is attracted to itself. The consistency reminds me of cold chocolate pudding. So you must have patience when applying this, or you'll waste product. I applied 3 thin coats, and then normal paint on top of that. I did not wait between coats because each layer was dry by the time I started over, since I used thin coats. I would have done more coats, but the can is SMALL. Hence, I only painted the center third of my child's wall. It will not hold anything heavy, but it does work with small magnets, kids play magnets, and earth magnets. If I ever get more patience and more money to spare, I'd buy again and make up another use for it.

The main reason for getting this was to be able to hang things on stuff without creating holes. I’m back to using 3m Velcro. This stuff has so little iron in it, most of my magnets barely hold on and if I add any weight to them they just slid right off. Great idea for a product but it does not work even after the max number of coats. If you are thinking this will be great for hanging photos or really anything but letter magnets, don’t waste your time or money

Should be called magnetic gel paint because it is really thick but goes on very easy. I would say it may be easier with a roller however, I had no issues with a small paint brush though I think a roller would yield a better finish.Additionally, the paint goes a long way. Area painted is approx 36x28 and more than half a can remains4 coats of magnetic1 top coatI thought the paint wouldn't of blended because magnetic paint is black(not grey) but it blended perfectly.